similar to: corrupted /etc/mtab

Hi everyone, I need to install an older version of PHP - 5.2.16, which is not currently available through an official CentOS repo (as far as I can tell). In order to fulfill our developer's requirements, I've decided to just compile PHP and MySql from the source. Is there a way to find out what are the usual configure options that are used to compile binaries that are available through

Hi everyone, I've installed CentOS 5 on Hyper-V and finally got everything working. I would like to setup a template, but google is failing me. Everything I read does not seem very promising when it comes to templates support with MS Hyper-V. I was wondering if maybe someone here has successfully configured CentOS templates? I realize that VmWare is a lot better, but it's not a

Hello, We have an older AFS server, which was running Centos 5.5. It hasn't been updated in a while because of the plans to move it to another server, but it never happened. Thus, we've decided to upgrade it to 5.7? I did yum clean all and yum update. Everything ran smoothly and no issues. After the reboot, zlib.so.1 can no longer be found. /usr/lib64/zlib.so.1 is a symbolic link

Hello everyone, I have Hyper V integration working properly, but needed to do an update to 2.6.18-274.12.1.el5-x86_64. Since then, it no longer works. As discovered previously, one needs to rebuild Hyper V Integration tools due to the kernel panic. http://www.sudonym.com/398/kernel-panic-after-yum-update-centos-with-hyper-v-linux-integration-components Done. But I'm getting an error

Hello everyone, I am trying to setup persistent LUNs and having problems. I've been following instructions I found on the web and they refer to editing /etc/scsi_id.config file and adding options=-g line there. After doing so, I should be able to run scsi_id -g -s /dev/sd* and get proper results. I've modified file /etc/scsi_id.config appropriately: [root at psrwjmsafs1 etc]# grep

Hi everyone, I'm trying to figure out the best way to accomplish below project and would appreciate your input. I need to setup a web page on CentOS with Active Directory authentication. So far I've accomplished the following: - Setup httpd.conf to successfully authenticate against AD by passing my username/passwd. <Directory /var/www/html/secure> Allow from All AuthType

Hi everyone, I just upgraded to 5.6 and keep on getting the following error message: [root at rwjafs1 ~]# yum update Loaded plugins: fastestmirror, priorities Loading mirror speeds from cached hostfile * base: centos.mirror.nac.net * extras: mirror.batblue.com * updates: mirror.atlanticmetro.net Setting up Update Process Resolving Dependencies --> Running transaction check ---> Package

I have cross-compiled smbmount(smbmnt, smbclient) using samba-3.0.24.tar.gz, then ported them to an ARM Arch machine whose /etc directory is read only. The smbmount command always results in errors """Can't get /etc/mtab~ lock filesmbmnt failed: 1""" Someone says that If we rebuild samba with the smbmount-nomtab.patch and smbmount-mtab-flags.patch, it would work

I have several CentOS5 hosts in a VMware ESX 3.5.0 226117 environment using iSCSI storage. Recently we've begun to experience journal aborts resulting in remounted-read-only filesystems as well as other filesystem issues - I can unmount a filesystem and force a check with "fsck -f" and occasionally find errors. I've found -

Hi, I'm trying to run smbmount on a machine with the root filesystem mounted as read only (it is a little embedded Linux PC which I want to pick up some files from its controlling NT box). The problem is that smbmnt doesn't appear to support the -n flag that normal mount supports which avoids accessing /etc/mtab. Can any one suggest any solutions to this ? Dave

I have 2 SCSI disks each w/a RH 7.3 ext3 root filesystem: /dev/sdb1, and /dev/sdc1. /dev/sda1 is an old RH4.2 root filesystem. (sdb1 was created as an image of sdc1 using dd.) I have no problem booting from a SYSLINUX 1.52 floppy with SYSLINUX.CFG containing "append initrd=initrd.img root=/dev/sdb1". When I alter SYSLINUX.CFG with: "append initrd=initrd.img root=/dev/sdc1".

Hello, we recently had a big problem with a very high load on our linux (Sles11 SP3) samba server version 3.6.3. We experienced a system load of up to 90 for 300 active samba users. The result was that hardly any user was able to really do anything (eg access a file via samba). One sympton was visible in a very high share of cpu *system* time (about 25% on each of the 10 CPUs). This system load

Dear all, I'm trying to find a way to automate checkdisk every 1 month on a weekend. in other words i want checkdisk to run every saturday morning. i can of course change the default mount/count though that wont let me control WHEN it will happen. so i need your expert opinion with the following if possible: 1. reboot into single user mode 2. start checkdisk for all disks 3. once done,

Hi all, I have a bunch of mail servers running postfix (external smtp), qmail (LDA) and courier IMAP/POP. Frequently, Ext3 filesystem goes into read-only mode forcing recovery using fsck. Below are the errors we have seen so far on these systems and those systems config. The ext3 errors are common in many cases. 1. Red Hat Enterprise Linux Server release 5.2 (Tikanga) 2.6.18-92.1.10.el5

Am 25.11.2014 um 21:39 schrieb James B. Byrne: > This morning I discovered this in the logwatch report for our external MX > backup host. > > > STARTTLS: write error=syscall error (-1), errno=32, > get_error=error:00000000:lib(0):func(0):reason(0), retry=99, ssl_err=5: 206 > Time(s) > > > > I also see many entries similar to this: > > > > 8:

This morning I discovered this in the logwatch report for our external MX backup host. STARTTLS: write error=syscall error (-1), errno=32, get_error=error:00000000:lib(0):func(0):reason(0), retry=99, ssl_err=5: 206 Time(s) I also see many entries similar to this: 8: fl=0x802, mode=140777: SOCK inet04.mississauga.harte-lyne.ca/34091->(Transport endpoint is not connected): 1 Time(s)

I got this error in my log reports this morning, from the machine I use as my firewall. This is the first time it has occurred, but the machine is running a very new kernel: Linux fendrian.rimspace.net 2.6.0-test11-fendrian #1 Wed Dec 10 22:25:59 EST 2003 i486 GNU/Linux The kernel was up to date as per the CVS repository at that point. This was just before the CDROM_SEND_PACKET IOCTL fix went

About two weeks ago i was whining about an inode that got lost, now i'm going to whine more about strange things happening here. A matroxfb just oopsed on me (thats not strange), the machine got unusuable, so i logged in from another and got the idea to touch /forcefsck. Upon reboot, fsck said that some inodes are in use but have dtime set and that some files are illegal sockets. Now this

Hi, i am seeing an oops (every couple of days) on a UP PII system with SCSI disks, Kernel 2.2.19 and ext3 0.0.6b. All oops output passed the klogd thus i cant anymore pipe it through ksymoops - I ensured klogd got the correct System.map so the result should be reliable. Apr 25 17:03:10 Unable to handle kernel paging request at virtual address 8efd1fc8 current->tss.cr3 = 0981e000, %%cr3 =

We have a remote warm standby system running CentOS-6.8 as a KVM system with multiple guests. One of the guests began reporting an error when running aide. Caught SIGBUS/SEGV while mmapping. File was truncated while aide was running? Caught SIGBUS/SEGV. Exiting The /var/log/messages file contained this: Mar 9 09:14:13 inet12 kernel: end_request: I/O error, dev vda, sector 14539264 Mar 9