similar to: Startech USB21000S

I got a new USB ethernet adapter from ebay, the ad said RealTek chipset, so I thought I would chance it. Well, my 5.2 system does not recognize the USB device. At all. What do I need to do? I checked the driver CD and the XP driver directory's .inf file has the following: ; ASIX AX88172 USB2 to Fast Ethernet Adapter * ; * ; Copyright 2001-2003,

I installed CentOS 6 on a Dell Optiplex 790 with a StarTech.com dual serial port card, and the serial ports aren't being recognized. According to dmesg, only the built-in serial port is being recognized: # dmesg | fgrep ttyS serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A And lspci -v doesn't show that any drivers are loaded for it:

Dear List, I am still having difficulty installing a second ethernet card in a new CentOS 6.2 install. Tom Bishop was kind enough to give me an excellent link to figure out how to change the device names the way I need to have them. It looks to me that CentOS is recognizing the st1000spex card from StarTech but I am unable to get data to go in or out of it. The StarTech manual for this card

The Startech.com pci2s550 can not be remapped to ports 1-4 before the system boots. The company is not supporting linux serial ports as consoles 0-3 , thank you starTech.com. ----- Original Message ---- From: n schembr <nschembr at yahoo.com> To: SYSLINUX at zytor.com Sent: Thursday, November 9, 2006 4:58:50 PM Subject: [syslinux] Serial with syslinux. Can syslinux be upgraded to support

I have an old computer running CentOS 5. I need to add an SATA drive to it, but it doesn't have any ports, so I need an add-on card. The board only has a 32-bit PCI slot. Any recommendations on cards/brands that work well with CentOS? I don't need any raid capabilities, I just need a couple of SATA connections. Thanks, -- Bowie

All- Ah, the saga of the 1U workstation continues. So, in all my work configuring the thing, I completely forgot about AUDIO; I only realized my mistake when I went on a cable-measuring expedition this morning. Unfortunately, none of the 1U servers I've been looking at come with audio outputs (there aren't even audio headers on the motherboard), and I've used the only availabnle slot

On 7/27/2015 12:29 PM, g wrote: > > On 07/27/15 10:06, Bowie Bailey wrote: >> I have an old computer running CentOS 5. I need to add an SATA drive to >> it, but it doesn't have any ports, so I need an add-on card. The board >> only has a 32-bit PCI slot. Any recommendations on cards/brands that >> work well with CentOS? I don't need any raid capabilities,

Hi all, Has anyone seen something like this before: I want to use a laptop as a KVM console. Basically when a technician goes to one of our datacentres, or clients he has to look for a free LCD, keyboard & mouse to connect to a server (no network access, reinstall, troubleshoot failed kernel / HDD, etc). And then hopefully there's an open power socker in that cabinet. So I'm

Greetings, I have a samba server deployed. The machine has these: cpu: amd64 -4 cores motherboard :GA-990XA-UD3 with 6 sata ports and StarTech 2 Port SATA 6Gbps PCIe SATA Card memory: 16GBytes disks: raid 10 (6 disks) os: cblfs/linux kernel-3.1.5 pure 64bit and samba-3.6.0 The machine in deployed as a data-storage-device for windows7-based machines doing

Hi, Does anybody has any experience with e-sata on CentOS5.2? - How fast is it? Same as an internal sata? - Does it support sata-2? - Does it "hot-plug" like a USB? -- Thanks http://www.911networks.com When the network has to work

Hi, I have a SATA PCIe 6Gbps 4 port controller card made by Startech. The kernel (Linux viz1 2.6.32-220.4.1.el6.x86_64) sees it as Marvell Technology Group Ltd. 88SE9123 I use it to provide extra SATA ports to a raid system. The HD's are all "WD2003FYYS" and so run at 3Gbps on the 6Gbps controller. However I am seeing lots of instances of errors like this

Hello list I've been running the following command, first in fc20 and then now (since the beginning of March) in fc26: now=$(date +"%Y%m%d-%H%M"); sudo rsync -ahuAESX -vi /home/ /run/media/readlegal/Backup/home > /run/media/readlegal/Backup/rsync-changes_$now Since the move to fc26, this command has caused the complete freeze/crash of the system. I tried it under multi-user

I installed a 2 port serial PCI card on a system running CentOS 4.3, but I can't get the additional serial ports to work. The card I used is from StarTech (http://www.startech.com/Product/ItemDetail.aspx? productid=PCI2S550&c=US). When it is detected by kudzu, it shows up as a "NetMos Technologies PCI 9835 Multi I/O Controller". I've included the output of

Hi All - Has anyone tried using a USB 4K adapter ? Something like Startech USB32HD4K? Are these devices on option for linux ? Thanks Jerry

Hi all, I have a question regarding connection of two Asterisk servers to our PBX. Each Asterisk server has one PCI E1 card, and they are in failover mode with Linux HA. On our PBX we have only one E1 card towards Asterisk servers. My question is how to connect these two Asterisks to one E1 card on PBX, and when primary Asterisk server fails not to have to manually pull out E1 cable from primary

First off, thanks! :) It appears that the issue could be a bad switch. At this time, I have turned down the server's NIC to run at 10baseT-FD and the performance has seriously increased. It now takes roughly 25 to 35 seconds to copy and 8mb file to the server, but it now takes a little longer to copy a file from the server. So, we are now in the market for some far superior network

I have installed two 4-port serial cards (http://www.startech.com/ Product/ItemDetail.aspx?productid=PCI4S550&c=US) on a CentOS 4.4 system. The hardware appears to be recognized correctly, as kudzu added 2 entries to /etc/sysconfig/hwconf and lscpi shows both cards (output of lspci -vv for both cards included at the end of this email): # lspci 00:00.0 Host bridge: Intel Corporation

Hi all, Space is starting to get a bit tight here, so I''m looking at adding a couple of TB to my home server. I''m considering external USB or FireWire attached drive enclosures. Cost is a real issue, but I also want the data to be managed by ZFS--so enclosures without a JBOD option have been disgarded (i.e., I don''t want to use any internal HW RAID controllers). One

I am trying to transport a dd image between to hosts over a cross linked gigabit connection. Both hosts have an eth1 configured to a non routable ip addr on a shared network. No other devices exist on this link. When transferring via sftp I received a stall warning. Checking the logs I see this: dmesg | grep eth e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:1c:c0:f2:1f:bb

Hi, I have a Sitecom NL-031 USB 3.0 NIC which I'd like to use under centos 6.5, but unfortunately I see no support. Or, I am doing something wrong. According to LKDDb (Linux Kernel Driver DataBase), the correct driver is "CONFIG_USB_NET_AX8817X: ASIX AX88xxx Based USB 2.0 Ethernet Adapters" but obviously, I've grabbed a non matching "iProduct", because mine is