similar to: Asterisk 10.0 Realtime

I'm building a dialplan for use with a bunch of GXP2000 desk sets. During testing, we had some user issues surrounding the lack of an on-phone dialplan. Users would hit 9 and sit there waiting for a redial tone, and the GXP would time out, sending just '9' to *, which couldn't do much other than spit back a 404 or play pbx-invalid. I turned on the "early dial" option

Hello list, i have one question related to call forwarding. i have 2 number for the inbound and i want to configure asterisk like that. When the customer call the first number 0522XXXXXX the call will be forwarding automatically to anther number 0520xxxxxx Does anybody have a solution to this problem. Thanks and Regards. -------------- next part -------------- An HTML attachment was

Has anyone observed a problem where using Local channels with AddQueueMember results in missing TRANSFER events? Right now I'm using straight SIP channels when I call AddQueueMember(). I'm contemplating moving to Local channels because the non-state-based wrapuptime blows when you have a channel in multiple queues (they can hang up and get a call immediately so long as it's from a

Hi list I'm trying to implement sourcerouting on a distributed installation, but I can't get contexts to work right. My goal is to do a Dial(whatever@somecontext) and vary the somecontext based on different criteria. This is going on over trunked IAX2 links. How do I set up my IAX-accounts to manage this? I have tried to play around with 'context' and 'peercontext' on

Hi, With Asterisk 1.8 is it now possible to register the same SIP account at multiple endpoints and for both to ring when the associated extension is dialed ? -- Thanks, Phil -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110309/fe9d7bc7/attachment.htm>

Under 1.4.5 and 1.4.6, I've seen a few instances where the channel name in queue log entries is replaced by a snippet of a manager event: --START-- 1183582823|1183582823.104763|queuename|SIP/XXXX|REMOVEMEMBER| 1183582828|1183582793.104744|queuename| Context: macro-dialout Extension: s Priority: 3 Application: GotoIf AppData: 0?blockclid Uniqueid: 1183582822.104759

Dear All I want to integrate sugarcrm and asterisk , so when customer call the call center the agent or extension which answers the call , before pickup the phone and talk to customer , view his/her information if it is available. I do this as described below : 1-Setup login username for sugarcrm for each extension 2-Extension Users will login to the sugarcrm. 3-Develop php script to handle new

Hi, I got my * working fine with FWD at office with 2 extensions, i receive calls and i can make calls thru FWD. I got also my * at home, and i connected it using auth=rsa. From my home, i can make calls using my office iax, but if i try to redirect incomming calls from FWD to my * at home, it rejects the call. I created the pub/key pairs for rsa and its working ok and i just pasted the

Hi All, Anyone know if theres a way to share a Cisco 7940 between hot-desk users? My phones get their setup via SIP .cnf files, that load at boot via tftp, so I'm assuming the configs a failry static. However if I want a phone to be hot-desked, I could have different users sitting there. Is there any concept of "logging on" in these environments? Cheers, Adrian

I'm trying to clarify contexts and their uses. I do have a good general understanding of them. My question is about "undeclared" and "non-existant" contexts. If I have a block somewhere (in sip.conf, for example), and it has no "context=thiscontext" field, does it just automatically use the "default" context? Or is this settable? (I see there is an

I am wanting to front-end a legacy PBX with an asterisk box. I have done plenty of asterisk work over the last 6 months to PRI circuits, but not with a PBX being involved. I know I can use asterisk and digium cards in this manner, but do I need separate cards for the PRI -> Asterisk side to the Asterisk -> PBX side, or will a 4-port PRI card do the job? (I already have a spare one of

Hello, Is there or can anyone provide a comprehensive guide (designed for Linux/Asterisk novices) to installing/setting up Asterisk in order to support Fax2Mail service? In my case, I would like Asterisk to receive fax calls to predefined numbers (ranges) and to associate each of these numbers to email addresses. Thank you in advance. David --------------------------------- Yahoo!

I have a sip.conf with stanzas for sip phones that have 'context=sip-incoming for some Grandstream phones and another stanza for a Sipura SPA3000 with context=pstn-incoming. Reviewing the code today, I was dismayed to see that all my outgoing extens were mixed into those two. I have been told this is very insecure. How can I separate the outgoing extens? When I create a context

Hi I have a problem with Asterisk-1.6.0.3-rc1 and manager API. I want to dial out from manager's console and with Asterisk 1.4.X this settings were OK. Action: Originate Channel: SIP/384 Context: main Exten: 102 Priority: 1 Callerid: 384 I could dial out, but with asterisk 1.6 I get this error. Response: Error Message: Channel not specified I have originate and system privilege in

It _appears_ that the only way to create valid [context] is by a context = line in sip.conf. Is there another way to create a [new_context] in extensions.conf so I can dial from it? Right now most of my extens are in [default] and I'd like to avoid that. Larry -- Larry Alkoff N2LA - Austin TX Using Thunderbird on Slackware Linux

Hi, Did anyone try to set up alarmreceiver application over IP network? Which ATA can I use? I tried to set up it with Linksys PAP-2 but with no luck. Maybe I did something wrong with alarmreceiver.conf (I tried diverse settings, but nothing worked). Sometimes alarmreceiver is able to get some events but sometimes not. I think Linksys PAP-2 has a problem with recognizing digits in appropriate

Hi all, I've been using the following method to limit calls to sip clients to 1: exten => 200,1,SetGroup(200) exten => 200,2,CheckGroup(1) exten => 200,3,Dial(SIP/200) exten => 200,103,Busy This works fine for a single extension. However, I also need to dial groups of sip clients. It appears that SetGroup can only be used once per channel. This (useless) example would not

Hello, I can''t force tc to work under SUSE 10.0 OSS. Before this we have working system under SUSE 9.1 (with kernel 2.6.15.4), and consider to move this system to another hardware. I install SUSE 10.0, first with kernel from distributive, than with kernel 2.6.16.18, than with 2.6.15.4 (the same version as on working system), but I can''t force tc to work. The

Hi! I trying stat up my Photoshop CS 3 on Wine (wine-1.1.5). My Photoshop installation is on the Windows partition C: (NTFS filesystem with Vista OS). I mount partition with ntfs-3g, and next i trying type in console "wine Photoshop.exe". After, i can see window of Photoshop: [Image: http://img523.imageshack.us/img523/6633/dddaddsb9.th.png ]

Hi list, I have a set of 300 or so WAV files I was combining and playing using playback/background in 1.4.X. Now that I have moved on to the 10.0 set, I understand that I can replace my 8 Khz mono files with virtually unlimited Khz mono files (still no stereo, but a quantum leap forward). I've played with this and get good throughputs using SLIN44 formats on SIP. The 2 questions