similar to: fsck

Hey folks, I searched the list archives and found this : echo "AUTOFSCK_TIMEOUT=5" > /etc/sysconfig/autofsck echo "AUTOFSCK_DEF_CHECK=yes" >> /etc/sysconfig/autofsck http://lists.centos.org/pipermail/centos/2006-November/029837.html http://lists.centos.org/pipermail/centos/2009-September/thread.html#81934 Will this do all disks? I want to do a reboot of a couple

Hi, Is it possible do have fsck to run automatically [without operator intervention], if it was not a clean shutdown. Right now, somebody has to bring a monitor & keyboard and say Y, if not it will not run and verify the drive. This is for remote headless servers. -- Thanks http://www.911networks.com

You know how if you do an improper shutdown and then boot up, the server prompts you to run a file system check if you press "Y" within 5 seconds? Well, this is great but sometimes not practical in remote access situations when we call our datacenter to say reboot a hang server and they have no monitor or keyboard hooked up to the system. Is there a way to have the system forced to

Hi List, I have been searching for the correct createrepo command to make a 6.4 respin. We have been doing this with previous versions using createrepo -u "media://$discinfo" -g ${DIR}/my_kickstart${VER}/comps.xml . Which had worked fine until now. Thanks, -- Stephen Clark *NetWolves* Director of Technology Phone: 813-579-3200 Fax: 813-882-0209 Email: steve.clark at netwolves.com

Hi all, I want to setup a RAID storage system, where i have two systems connected to it. the filesystems are mapped out to both connectors. I want the master host mount them read write, and the slave read only. in my fstab on the slave I have a line like the following: /dev/sdb1 /mount ext3 acl,noauto,user_xattr,nosuid,ro 0 0 so in man 5 fstab, it is written, that when the 6. field

Hello, Anybody else run into problems with biosdevname .0.5..0-2 changing names from p2p1 to em1 when upgrading from biosdevname 0.4.1-3? Darn! I thought biosdevname was to keep the names the same!! -- Stephen Clark *NetWolves Managed Services, LLC.* Director of Technology Phone: 813-579-3200 Fax: 813-882-0209 Email: steve.clark at netwolves.com http://www.netwolves.com

Hi, I have a confusing problem. I have two centos 5,5 boxes. Both have sudo.i386 1.7.2p1-9.el5_5 installed I am using the same sudoers file, but the one on box A keeps trying to do DNS lookups while the one on box B does not. How do I disable this DNS lookup? Thanks for any info. -- Stephen Clark *NetWolves* Sr. Software Engineer III Phone:

Hi, I am setting up crashkernel and was wondering where I get the kernel-debug rpm for centosplus kernels. Thanks, -- Stephen Clark *NetWolves Managed Services, LLC.* Director of Technology Phone: 813-579-3200 Fax: 813-882-0209 Email: steve.clark at netwolves.com http://www.netwolves.com

Alan& Akemi, Would it be possible to get CONFIG_ARPD turned on in the centosplus 6.x kernel? It is required to use opennhrp. See the link below where is was decided to turn it on in Fedora. https://bugzilla.redhat.com/show_bug.cgi?id=502844 -- Stephen Clark *NetWolves* Director of Technology Phone: 813-579-3200 Fax: 813-882-0209 Email: steve.clark at netwolves.com

Hi, Has anyone using CentOS 6 been able to successfully set an mtu larger than 9710 on an interface. I am seeing super jumbo frames with length > 10000. ... IP 10.79.4.53.64327 > 10.79.2.53.24294: Flags [.], seq 16060:29200, ack 1, win 32767, length 13140 ... CentOS release 6.7 (Final) Thanks, -- Stephen Clark *NetWolves Managed Services, LLC.* Director of Technology Phone:

Hi List, FYI. We have been using CentOS 6.4 and have 2 vpn/gre tunnels to separate cisco rtrs using ospf. with kernel 2.6.32-358.23.2 We have upgraded to 6.5 bit using kernel 2.6.32-431.5.1 and the exact same configuration scripts for our vpn/gre tunnels. What I see is the first gre tunnel works great and I get an ospf neighbor. The second tunnel comes up and I can ping across it and I see

Hi, Has anyone else had trouble trying to reach the epel repo. I can only get to it if I change the https to http in the epel.repo file. -- Stephen Clark *NetWolves Managed Services, LLC.* Director of Technology Phone: 813-579-3200 Fax: 813-882-0209 Email: steve.clark at netwolves.com http://www.netwolves.com

Hi, Does anyone know if there is an option for the ifcfg-br file that matches the brctl setageing parameter? I am using KVM and am running a DPI guest and need this parameter set to 0 to get mirrored span port data to cross the bridge to the guest vnet device. Thanks, -- Stephen Clark *NetWolves Managed Services, LLC.* Director of Technology Phone: 813-579-3200 Fax: 813-882-0209 Email:

Hello List, Does anyone know why this is not available in CentOS 6.6. I found it in a SL repo but not in CentOS. I found several CentOS Bugs one answered by JH http://bugs.centos.org/print_bug_page.php?bug_id=6822 saying it had been added to 6.5 2013-12-09 19:05 JohnnyHughes Resolution open => fixed But it is still not available. cat /etc/redhat-release CentOS release 6.6 (Final)

Hi List, Strange problem. I am running off of CentOS x86_64 6.4 usb key that is sdb I have ssd disk that has a centos image on it. I have mounted the partitions /dev/sda3 as /mnt/sysimage and /dev/sda1 as /mnt/sysimage/boot I am trying to chroot to /mnt/sysimage dir but get the following error. [root at localhost root]# /usr/sbin/chroot /mnt/sysimage /bin/bash /usr/sbin/chroot: failed to run

We have a simple configuration so we could get by with this -A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -s "SOURCIPADDRESS" -j REJECT --reject-with icmp-host-prohibited it doesn't scale well but servies the purpose. _____________________________________ "He's no failure. He's not dead yet." William

Hello, Anybody know the reason RedHat decided not to support the VIA Eden Processor? cat /proc/cpuinfo processor : 0 vendor_id : CentaurHauls cpu family : 6 model : 13 model name : VIA Eden Processor 500MHz I am testing, (using ayplus kernel) and get the following during bootup: Linux version 2.6.32-71.24.1.el6.centos.ayplus.1.i686 (build at 6beta32) (gcc versi

Hello, I am trying to compile RHEL-6 kernel srpm on Fedora 14 and run into the following problem. From what I read -Werror flag causes warnings to be treated as errors - but I don't see that flag on in the following. Any ideas? gcc -Wp,-MD,arch/x86/kernel/acpi/realmode/.wakemain.o.d -nostdinc -isystem /usr/lib/gcc/i686-redhat-linux/4.5.1/include -nostdinc -isystem

Thanks for responding so quickly! No but I will try. Are you saying the first vendor connection worked because id_rsa and id_rsa.pub are the defaults if not specified? (I didn't use the -i flag for the first vendor.) -----Original Message----- From: CentOS [mailto:centos-bounces at centos.org] On Behalf Of Steve Clark Sent: Wednesday, December 12, 2018 2:23 PM To: CentOS mailing list