similar to: virt-v2v error - Fedora 16

Hi! I'm trying to convert some Xen guests running Centos 5.8 to KVM on Centos 6.3. Hopefully this is the right place to ask this question, if not, let me know and I'll go there instead! :) My setup: Centos 5.8 Host running Xen with a Centos 5.8 guest, and I want to transfer this guest to a different Centos 6.3 host running KVM. I am able to tweak the target server all I want, but the

Hi, I'm trying to do a physical-to-virtual migration for a Windows 2003 Server to RHEV 3.0 and I'm getting errors in the conversion. I created a Virt-P2V.iso using Fedora 16 (i686) using virt-v2v-0.8.7 and virt-p2v-image-builder-0.8.7 instead of the 0.8.5 version available in the repos. The conversion server is the same server where I created the ISO. I edited the /etc/virt-v2v.conf

Hello, I've trying to move a 32bit CentOS 6.4 on VirtualBox to oVirt on Fedora 19 64bit via virt-v2v. The command I'm currently using is: virt-v2v -i libvirtxml -of qcow2 -oa sparse -o rhev -osd xxx.xxx.xxx.xxx:/usr/local/ovirt/exports --network ovirtmgmt /usr1/home/williams/Downloads/OpenAthens/VMs/OpenAthensLARuntime2.2.xml The exciting bit of the XML is: <devices>

Hi, Created a zpool with 64k recordsize and enabled dedupe on it. zpool create -O recordsize=64k TestPool device1 zfs set dedup=on TestPool I copied files onto this pool over nfs from a windows client. Here is the output of zpool list Prompt:~# zpool list NAME SIZE ALLOC FREE CAP DEDUP HEALTH ALTROOT TestPool 696G 19.1G 677G 2% 1.13x ONLINE - When I ran a

Mike, This is great. I have a couple of minor comments inline, but this looks good. I do have a major concern, though, which is this is basically a fork of RedHat.pm. There are well over 1,000 identical lines of code between the 2 modules. Many of the differences are relatively minor, and could be handled with additional cases. I've also fixed a couple of bits in RedHat.pm since you forked

Run with LIBGUESTFS_ATTACH_METHOD=appliance Fails with: inspect_os: mount_ro: /dev/sda on / (options: 'ro'): mount: /dev/sda is already mounted or /sysroot busy at /usr/share/perl5/vendor_perl/Sys/VirtConvert/GuestfsHandle.pm line 194. virt-inspector works as expected libguestfs-test-tool.log: http://pastebin.ca/2317900 virt-v2v.log: http://iaindb.pastebin.ca/2317938 Any

This change is part of an ongoing effort to remove use of $desc and inspect the OS directly as required during conversion. --- lib/Sys/VirtConvert/Connection/LibVirtTarget.pm | 4 +- lib/Sys/VirtConvert/Connection/RHEVTarget.pm | 41 +++++++++--------- lib/Sys/VirtConvert/Converter.pm | 35 ++++++++++++---- lib/Sys/VirtConvert/Converter/RedHat.pm | 45

From: "Richard W.M. Jones" <rjones at redhat.com> This is the default since libguestfs 1.6. It does not need to be explicitly set. See also https://bugzilla.redhat.com/show_bug.cgi?id=799798#c6 --- lib/Sys/VirtConvert/GuestfsHandle.pm | 3 --- 1 files changed, 0 insertions(+), 3 deletions(-) diff --git a/lib/Sys/VirtConvert/GuestfsHandle.pm

On Tuesday, October 08, 2013 10:05:17 AM Matthew Booth wrote: > Feel free to remove ^$path. However, for robustness I ditch the leading > ^ from your replacement. The difference will be down to a different > version of file included in the libguestfs appliance on SUSE. I think I've addressed all the concerns you raised in the following patch. Can you take a look and let me know if

'distro' isn't used anywhere for Windows guests. However, if it's set, it's required to be matched in virt-v2v.conf. Rather than have to update the config again, just don't set it for Windows guests. --- lib/Sys/VirtConvert/Converter.pm | 3 ++- 1 files changed, 2 insertions(+), 1 deletions(-) diff --git a/lib/Sys/VirtConvert/Converter.pm

The $vmdk value is a directory name in ESX.pm, although the later codes replace '/' with '_', the volume name isn't still friendly, for example, it looks like this: # virsh vol-list pool-dir Name Path ----------------------------------------- esx4.1-rhel6.2-x86_64_esx4.1-rhel6.2-x86_64

--- lib/Sys/VirtConvert/Converter/Windows.pm | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/Sys/VirtConvert/Converter/Windows.pm b/lib/Sys/VirtConvert/Converter/Windows.pm index 765ed9f..59d273f 100644 --- a/lib/Sys/VirtConvert/Converter/Windows.pm +++ b/lib/Sys/VirtConvert/Converter/Windows.pm @@ -338,7 +338,7 @@ sub _prepare_virtio_drivers

Although not fatal, _unconfigure_xenpv should report a warning and return if firstboot is not available (during Windows conversions). --- lib/Sys/VirtConvert/Converter/Windows.pm | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/lib/Sys/VirtConvert/Converter/Windows.pm b/lib/Sys/VirtConvert/Converter/Windows.pm index 59d273f..ce8b474 100644 --- a/lib/Sys/VirtConvert/Converter/Windows.pm

i'm having difficulty running KVM virtual machines off of a glusterFS volume mounted using the glusterFS client. i am running centOS 6, 64-bit. i am using virt-install to create my images but encountering the following error: qemu: could not open disk image /mnt/myreplicatestvolume/testvm.img: Invalid argument (see below for a more lengthy version of the error) i have found an example of

Hello, I just upgraded some of my el6xen boxes to latest CentOS 6.7, Xen 4.4.3 and dom0 3.18.17 rpms, and noticed these new problems: 1) virt-manager fails to start with an error: "D-Bus library appears to be incorrectly set up; failed to read machine uuid: Failed to open "/var/lib/dbus/machine-id": No such file or directory" And indeed.. there was no such file. Running

During a Windows conversion, _prepare_virtio_drivers aborts the conversion completely if the configured virtio driver path does not exist. If the path exists but is empty, the conversion completes correctly by defaulting to the non-virtio drivers. This patch treats a missing directory just like missing drivers, by reporting a message, then defaulting to non-virtio drivers. ---

In some cases (specifically, SUSE grub2 environments) it is possible to fail to update the block entries in device.map. In turn, this causes an invalid path to be returned in perl-Bootloader code, which causes the conversion to fail with the following message: is_file_opts: is_file: is_file_stub: path must start with a / character This patch prevents the problem by adding device.map (for

Hi, Seems that such migration is currently broken, at least for 0.9.11|0.9.12, with 0.9.8 all works fine: virsh migrate --live testvm qemu+tcp://towerbig/system ---snip--- 2012-05-17 21:22:30.250+0000: 16926: debug : qemuDriverCloseCallbackGet:605 : vm=testvm, uuid=feb7ccb6-1087-8661-9284-62e3a1e9f44a, conn=(nil) 2012-05-17 21:22:30.250+0000: 16926: debug : qemuDriverCloseCallbackGet:611 :

Hello, I have been struggling through the task of moving our infrastructure over to Xen VMs. We were initially using Ubuntu packages for both dom0 and our domUs, but experienced extreme instability so we moved to CentOS, which has been much more reliable for dom0. Since we already had a bunch of Ubuntu VMs, we left them using the Ubuntu 2.4.24-19-xen kernel, but this has turned out to be

OK, I know that there''s been some discussion on this before, but I''m not sure that any specific advice came out of it. What would the advice be for supporting a largish number of users (10,000 say) on a system that supports ZFS? We currently use vxfs and assign a user quota, and backups are done via Legato Networker. >From what little I currently understand, the general