similar to: samba-3.6.0-server frequent crashes

Greetings, I have setup a computer to act as a 'samba-server'. The machine has these:- --cpu: amd64 --OS: cblfs linux --samba-3.6.0 compiled from sources in /usr/local/samba The clients are windows 7 clients. They can only see the server as its IP- address not a name/hostname. QUESTION: -------- Are there entries to be made in smb.conf to enable the smbserver to be seen as its

Hi, I have a SATA PCIe 6Gbps 4 port controller card made by Startech. The kernel (Linux viz1 2.6.32-220.4.1.el6.x86_64) sees it as Marvell Technology Group Ltd. 88SE9123 I use it to provide extra SATA ports to a raid system. The HD's are all "WD2003FYYS" and so run at 3Gbps on the 6Gbps controller. However I am seeing lots of instances of errors like this

Greetings, I last built R-2.11.1 a few months ago. The computer was equipped with these:- ---cpu amd64 2 cores ---o/s cblfs 64-bit only linux kernel-2.6.32 gcc-4.4.2 jdk(1.5)-6U20? ---bls atlas3.9.26 lapacck-3.2.1 I obtained an installed directory of ~58Mbytes and in the ~/lib directory was libR.so (~7.8Mbytes in size) as well as libRblas.so and libRlapack.so (~2.9Mbytes). I have

Greetings, I have a computer with the following setup: 1)cblfs (pure 64-bit (amd64) linux), kernel2.6.34 gcc4.4.2 2)R-2.11.1 I compiled R with BLAS and lapack using the switched ( --with-blas="- lpthread -latlas -lfptf77blas" --with-lapack="-llapack -lcblas" ). (( http://cran.r-project.org/doc/manuals/R-admin.html#Linear-algebra) ) Prior to compiling R-2.11.1 sh

Dear List, I am still having difficulty installing a second ethernet card in a new CentOS 6.2 install. Tom Bishop was kind enough to give me an excellent link to figure out how to change the device names the way I need to have them. It looks to me that CentOS is recognizing the st1000spex card from StarTech but I am unable to get data to go in or out of it. The StarTech manual for this card

Greetings, I am learning R My machine has these; CPU: 3cores amd64 OS pure-64bit CBLFS liux compiled from sources (kernel 3.2.1, gcc-4.6.2 R-2.15 When I compiled R the compiler spewed out lines like these:- make[3]: Entering directory `/tmp/RtmpiHdDJy/R.INSTALL472339eeb23a/mgcv/src' gcc -m64 -std=gnu99 -I/home/Rman/R-2.15.0/include -DNDEBUG - I/usr/local/atlas/include

The Startech.com pci2s550 can not be remapped to ports 1-4 before the system boots. The company is not supporting linux serial ports as consoles 0-3 , thank you starTech.com. ----- Original Message ---- From: n schembr <nschembr at yahoo.com> To: SYSLINUX at zytor.com Sent: Thursday, November 9, 2006 4:58:50 PM Subject: [syslinux] Serial with syslinux. Can syslinux be upgraded to support

I installed CentOS 6 on a Dell Optiplex 790 with a StarTech.com dual serial port card, and the serial ports aren't being recognized. According to dmesg, only the built-in serial port is being recognized: # dmesg | fgrep ttyS serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A And lspci -v doesn't show that any drivers are loaded for it:

I've had several recent crashes of the nouveau kernel driver over the past month or so. My suspicion is that Firefox is causing it. The screen goes black and then the computer reboots. Nothing much in the syslogs, however I've managed to get netconsole output. It happens very infrequently and I'm afraid I don't know how to reproduce it, however I'll be more than happy to

On 7/27/2015 12:29 PM, g wrote: > > On 07/27/15 10:06, Bowie Bailey wrote: >> I have an old computer running CentOS 5. I need to add an SATA drive to >> it, but it doesn't have any ports, so I need an add-on card. The board >> only has a 32-bit PCI slot. Any recommendations on cards/brands that >> work well with CentOS? I don't need any raid capabilities,

All- Ah, the saga of the 1U workstation continues. So, in all my work configuring the thing, I completely forgot about AUDIO; I only realized my mistake when I went on a cable-measuring expedition this morning. Unfortunately, none of the 1U servers I've been looking at come with audio outputs (there aren't even audio headers on the motherboard), and I've used the only availabnle slot

I installed a 2 port serial PCI card on a system running CentOS 4.3, but I can't get the additional serial ports to work. The card I used is from StarTech (http://www.startech.com/Product/ItemDetail.aspx? productid=PCI2S550&c=US). When it is detected by kudzu, it shows up as a "NetMos Technologies PCI 9835 Multi I/O Controller". I've included the output of

Hi All - Has anyone tried using a USB 4K adapter ? Something like Startech USB32HD4K? Are these devices on option for linux ? Thanks Jerry

Hello list I've been running the following command, first in fc20 and then now (since the beginning of March) in fc26: now=$(date +"%Y%m%d-%H%M"); sudo rsync -ahuAESX -vi /home/ /run/media/readlegal/Backup/home > /run/media/readlegal/Backup/rsync-changes_$now Since the move to fc26, this command has caused the complete freeze/crash of the system. I tried it under multi-user

Greetings, My computer has these OS: 64-bit blfs linux R2.15.1 If one has downloaded a tarball for example MASS.tar.ga and unzip it Are there R commands to generate the following?:- a) the INDEX file b) 'R' files such as MASS.rdb and MASS.rdx advice would be appreciated sincerely luxInteg

Hi All, Just wondering if anyone has had the occasion to use one of these for usb networking with Centos 6.2. Did it work out of the box? Any recommendations? It uses the ax88178 chipset and is a gigabit usb network adaptor. Thanks a bunch, in advance for your time. Phil

I have an old computer running CentOS 5. I need to add an SATA drive to it, but it doesn't have any ports, so I need an add-on card. The board only has a 32-bit PCI slot. Any recommendations on cards/brands that work well with CentOS? I don't need any raid capabilities, I just need a couple of SATA connections. Thanks, -- Bowie

Dear mailinglist, I own a Gigabyte motherboard GA 970A UD3 with IOMMU support. Since the update XSA-36 (also part of the latest debian wheezy pkg), the IO-Virtualisation does not work any more as discussed on this mailinglist [0] and [1]. I like to ask, if there is an "official" solution in sight. I''m not sure about my alternatives. How "dangerous" is the

Greetings, I am trying to use install.packages obtained from here http://stat.ethz.ch/R-manual/R-devel/library/utils/html/install.packages.html My computer has these OS: 64-bit blfs linux R2.15.1 #------------ A) I did the following:- export DIR=/home/stats/R-2.15.0_runTEST190712A export DEST=/home/stats/Rtester cd $DEST ${DIR}/bin/R install.packages(MASS_7.3-17.tar.gz, ${DEST}, repos =

I have installed two 4-port serial cards (http://www.startech.com/ Product/ItemDetail.aspx?productid=PCI4S550&c=US) on a CentOS 4.4 system. The hardware appears to be recognized correctly, as kudzu added 2 entries to /etc/sysconfig/hwconf and lscpi shows both cards (output of lspci -vv for both cards included at the end of this email): # lspci 00:00.0 Host bridge: Intel Corporation