similar to: centos6.2, parted and alignment

I have a couple development servers running centos 6.3 64bit that have LSI 9211-8i SAS2 controllers connected to a SAS2 backplane. these work fine with SATA hard disks (populated with a bunch of 3TB SATA drives)... I'm trying to install a OCZ Vertex3 SSD on each of the two servers to do some ssd caching tests... system sees the drive, so I do the following... # parted -a min

Hi, I''ve ordered a new server with: - 4x600GB Toshiba 10K SAS2 Disks - 2x100GB OCZ DENEVA 2R SYNC eMLC SATA (no expander so I hope no SAS/ SATA problems). Specs: http://www.oczenterprise.com/ssd-products/deneva-2-r-sata-6g-2.5-emlc.html I want to use the 2 OCZ SSDs as mirrored intent log devices, but as the intent log needs quite a small amount of the disks (10GB?), I was wondering

Chris Murphy wrote: <snip> > The emulation implementations don't come into play if the alignment is > correct from the start. The better implementations have significantly > less pathological behavior if alignment is wrong, but that's > anecdotal, I don't have any empirical data available. But I'd say in > any case you want it properly aligned. You really,

On 10/2/19 9:47 PM, Jonathan Billings wrote: > On Oct 2, 2019, at 3:39 PM, Ljubomir Ljubojevic <centos at plnet.rs> wrote: >> Richard on CentOS-devel mailing list has similar problem but suggests it >> might be issue only with CentOS, he says he had to add the kernel line >> to make it work. >> Name of the tread is: >> [CentOS-devel] Booting CentOS 8 in a VM

Hello, The editor of R will close after I enter the following commands. I do not know the reason at all. When does this happen? I would very appreciate it if you could let me know. Sincerely. ===== gam <- matrix(scan("C:/Documents and Settings/Yoko N/Desktop/R/sas2.txt"), ncol = 29) Read 384132 items Warning message: Replacement length not a multiple of the elements to replace in

Hi All, I have a Drobo, connected to a CentOS 6.4 box. The box sees it as /dev/sdg. I want to format it ext3 (as they dont support ext4) but when I try I get: # fdisk -u /dev/sdg WARNING: GPT (GUID Partition Table) detected on '/dev/sdg'! The util fdisk doesn't support GPT. Use GNU Parted. WARNING: The size of this disk is 17.6 TB (17592186044416 bytes). DOS partition table

Dear CentOS project's member I hope to decide the following problem with your knowledge. 1.I installed the CentOS6.2 into the DELL PC(https://www.dell.com/support/manuals/jp/ja/jpbsd1/latitude-e7440-ultrabook/late7440om-v3/specifications?guid=guid-247916a5-f1d3-44b2-82b7-f14374bb9a73&lang=en-us) with bootable usb created with CentOS-6.2-x86_64-minimal.iso. after that.I started the

Hi I have trouble with disklessclient with CentOS6.5 but 6.2. I have been using disklessclient from CentOS6.2 well. Both server and clients work with CentOS6.2. Recently I set up PXE boot server with CentOS6.5 and has trouble. I built vmlinuz and initrd.image in the same method I did for CentOS6.2 [root at pxe ~]# yum -y groupinstall "Base" "Server Platform"

Dear ALL: XEN 4.1.2/4.1.3 failed to save centos6.2 HVM guest(with PV drivers) After save finished, the guest is halt with following errors: ---------------------------------------------------------------- Pm_op(): platform_pm_thaw+0x0/0x50 returns -19 PM: Device i8042 failed to thaw: error -19 ------------------------------------------------------------------ In my test, this happends

The dutch translation for the 6.2 release notes are ready: http://wiki.centos.org/Manuals/ReleaseNotes/CentOS6.2/Dutch

As much as I hate to be the bearer of news, I saw over 400 updates this morning on my upstream 6.1 box.... checking the upstream website, yeah, EL6.2 is out, at least for updates. I didn't see ISO's in my subscribed channel yet, though. I figured someone would notice soon enough. So before anyone goes into flame mode, think about the difficulties that have faced the CentOS developers in

Today when I run " yum groupinstall "Virtualization*" " on my server ,It retunes just like this : Warning: Group virtualization-tools does not have any packages. Package virt-who-0.3-3.el6.noarch already installed and latest version Package libvirt-client-0.9.4-23.el6_2.9.i686 already installed and latest version Package libvirt-0.9.4-23.el6_2.9.i686 already installed and

Hi, all I have a number of machines that are out of sync with one another by virtue of having done a yum update after a base 6.2 install at different times (all were previous CentOS 5.3) Consequently, systems are a mix of 2.6.32-220.7.1, 2.6.32-220.13.1 or 2.6.32-220.17.1. So 2 questions: - Is it possible to perform a yum update (or another other kind of update), specifying installation

Dear Sir, ??????????????? Please know me how to function hp 1213nf mfp printer (printer + scanner + fax + copy) in centOS 6.2. The computer shows the printer but cannot oprate. the message displayed "Missing printer driver"? etc. ??????????????? This will be very helpful to me if anyone can inform me the technique to operate this printer in centOS 6.2. ????????? Thanking you,

Hi, I have a 24TB RAID6 disk with a GPT partition table on it. I need to partition it into 2 partitions one of 16TB and 1 of 8TB to put ext4 filesystems on both. But I really need to do this remotely. ( if I can get to the site I could use gparted ) Now fdisk doesn't understand GPT partition tables and pat

part-expand-gpt takes extreme cautions and doesn't proceed to writing to the disk if the preliminary dry run of sgdisk has generated any warnings on stdout. This blocks the use of part-expand-gpt on disk shrink (with disk resize being the main usecase for part-expand-gpt), because sgdisk dry run produces a warning in that case. So remove the excessive safety check, and leave it up to the

On Thu, Oct 10, 2019 at 9:04 AM Nux! <nux at li.nux.ro> wrote: > There was a recent thread about Redhat's removal of drivers from LSI > SAS2, it's probably the problem you are facing. > It can be worked around with the help of Elrepo repo. > > > https://lists.centos.org/pipermail/centos/2019-October/173682.html > > >

HI. I have instaled a WEB server with Postgresql on CentOS 6.2. PostgreSQL, versin 9.1.3 x64 from EntrrpriseDB base *.run*. PHP with PDO from YUM using reposity versions. On start apache does not get error. PHP LOG under, with PDO error. *PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/pdo_pgsql.so' - libpq.so.5: failed to map segment from shared

I don't think this is off topic since I want to use JBOD mode so that Linux can do the RAID. I'm going to hopefully run this in CentOS 5 and Ubuntu 12.04 on a Sunfire x2250 Hard to get answers I can trust out of vendors :-) I have a Sun RAID card which I am pretty sure is LSI OEM. It is a 3G/s SAS1 with 2 external connectors like the one on the right here :

From: "Richard W.M. Jones" <rjones at redhat.com> This reverts commit a9c8123c72db47bcab8dd738e8d5256a9ae87f11. --- daemon/file.c | 18 +++--------------- daemon/parted.c | 3 +-- 2 files changed, 4 insertions(+), 17 deletions(-) diff --git a/daemon/file.c b/daemon/file.c index 057e15d..91746e0 100644 --- a/daemon/file.c +++ b/daemon/file.c @@ -525,7 +525,7 @@