similar to: c6, LSI megaraid drive failure notification

Hey, anyone using an LSI MegaRAID experienced "disappearing drives"...? We installed 6 new C6 servers, each with a Supermicro SMC2108 (LSI MegaRAID) controllers and 3 PX-128M5Pro SSDs ( RAID1 + hostswap). 2 weeks (and almost no activity on it, since not in production, apart from installation) later, megacli sees (based on the slot numbers): - on one server: only the 2nd disk of the RAID

Thank you for your help. Le 05/01/2015 19:10, John R Pierce a ?crit : > works here fine on the 9261, which is an OEM version of the same card > with the connectors in a different orientation... you might check your > LSI firmware revision. My firmware seems to be more up to date. Anyway, I will try to update firmware. I have to check how to do that. # dmesg |grep LSI scsi4 : LSI SAS

I have LSI Logic MegaRAID 8480 Storage controller I am having trouble reconfigure one of the hardware raid devices It is configured with 4 hardware raid logical volumes on /dev/sda /dev/sdb /dev/sdc /dev/sdd. I am in the middle of rebuilding the system, ?and at this point I am only using one of the volumes, /dev/sda /dev/sda, /dev/sdb, and /dev/sdd are all 2 drive raid1 mirrors I will be

On 1/30/2015 1:53 AM, Gordon Messmer wrote: > On 01/29/2015 05:07 AM, Jatin Davey wrote: >> Yes , it is a SATA disk. I am not sure of the speed. Can you tell me >> how to find out this information ? Additionally we are using RAID 10 >> configuration with 4 disks. > > What RAID controller are you using? > > # lspci | grep RAID [Jatin] [root at localhost ~]# lspci |

Does anyone know what program can be used to query the RAID status from the OS for an on-board LSI SAS 2308-4i? On this page: http://docs.avagotech.com/docs/12351997 there is a curious note on the left that reads: "Integrated MegaRAID support available upon request" After one mostly fruitless round of chatting with LSI/Avago/Broadcom and one completely fruitless round of chatting

Dear All; I want to install Centos 7 latest build on NEC Server 5800/120b-2. The installation wizard fails to detect the storage connected to LSI SATA MegaRaid PCI. Centos 5/6 were working fine with this H/W configuration but not the case with Centos 7. Please; advise. Fawzy Ibrahim Redhat Certified Engineer

Happy new year ! We have a SuperMicro server with a LSI MegaRAID 9260-4i controller. Since Centos 6.6 update (kernel 2.6.32-504), the controller doesn't initialize at boot. Reverting to kernel 2.6.32-431 allows server to boot fine. The server can't boot due to a bug in LSI megaraid module. Boot log ends by a lot of lines: RESET_GEN2: retry=xxx, hostdiag=a4 I tried Centos 6.6

John R Pierce wrote: > On 7/26/2016 10:20 AM, Fawzy Ibrhim wrote: >> I want to install Centos 7 latest build on NEC Server 5800/120b-2. >> >> The installation wizard fails to detect the storage connected to LSI >> SATA MegaRaid PCI. > > which megaraid card? they've made quite a lot. lspci will list the > card type... > > linux will only see storage

On Thursday 02 November 2017 14:10:25 Bowie Bailey wrote: > If you want raid 5 or 6, then you should get a hardware controller. For > raid 1, mdadm should work just fine.? I would suggest trying it before > buying a raid controller.? If it works for you, you save a few hundred > dollars and you have one less piece of hardware to worry about. > > I haven't looked at them in

I just had an IBM in a remote location with a hardware raid1 have both drives go bad. With local machines I probably would have caught it from the drive light before the 2nd one died... What is the state of the art in linux software monitoring for this? Long ago when that box was set up I think the best I could have done was a Java GUI tool that IBM had for their servers - and that seemed like

On 1/30/2015 9:44 AM, John R Pierce wrote: > On 1/29/2015 7:21 PM, Jatin Davey wrote: >> [root at localhost ~]# lspci | grep RAID >> 05:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS-3 >> 3108 [Invader] (rev 02) > > to get info out of those, you need to install MegaCli64 from LSI > Logic, which has the ugliest command lines and output you've

Scott Silverman wrote: > On Tue, Jul 10, 2018 at 12:37 PM, mark <m.roth at 5-cent.us> wrote: > >> I've got a box running C7, just updated (yesterday). It had an onboard >> RAID controller, and an HBA. I just installed a new, additional RAID >> card, all LSI. >> >> MegaCli64 only sees one controller. I can't seem to find the magic to >> see

Dear list, I have inherited a CentOS-5 box with a LSI Sata Raid controller. It is configured as a RAID5 w/hot-standby. My concern is that I have no present means of determining the RAID status w/o downing the system and going into the bios to get status. If a disk has failed and brought the standby disk online, I would like to know about it, the day it happens by seeing it in syslog or getting

Got a new box I'm trying to set up. I configured the RAID from the firmware, but "fast initialize" was sitting there at 0% (it's about 43 or 45TB). The first time I tried this, I said background, and rebooted the system. And the stupid annoying alarm started up as the system came up. This time, having *finally* figured out how to set up hot spares from the WebBIOS, I suspended

I've got a box running C7, just updated (yesterday). It had an onboard RAID controller, and an HBA. I just installed a new, additional RAID card, all LSI. MegaCli64 only sees one controller. I can't seem to find the magic to see the others. I *know* the new card is a MegaRAID - the box it came in says so. The system sees it 1:00.0 RAID bus controller: LSI Logic / Symbios Logic SAS1078

Is anybody here monitoring Dell SAS6/iR RAID health? I have a mix of CentOS 5.9 and 6.3 installs on the PE1950s. I'm finding drivers and Megaraid Storage Manager downloads via LSI's site, but I'd prefer not to install a bunch of crapware. All I need is the proper LSI daemon which exports info via SNMP. I've used check_sasraid_megaraid Nagios script [0] in the past for PERC5i and

Valeri Galtsev wrote: > > On Fri, May 6, 2016 1:36 pm, m.roth at 5-cent.us wrote: >> Got a new box I'm trying to set up. I configured the RAID from the >> firmware, but "fast initialize" was sitting there at 0% (it's about 43 >> or 45TB). The first time I tried this, I said background, and >> rebooted the system. >> >> And the stupid

Everyone, I am trying to install a Centos 6.0 system on a SuperMicro with an LSI MegaRaid SCSI 320-2 controller. I had originally tried to install 6.4, but the 6.4 install DVD does not boot with this configuration. See : http://bugs.centos.org/view.php?id=5377 Fortunately, the 6.0 install DVD worked fine until it failed to identify the hard disc controller. I checked the lsi.com site which

On 8/17/2016 7:46 AM, Fawzy Ibrhim wrote: > There's no option in BIOS to disable the RAID mode; this is NEC servers !! huh. i've never seen anyone using the lsi megaraid firmware with intel SATA ports, so thats two things weird about NEC, kinda glad I don't ever see those. -- john r pierce, recycling bits in santa cruz

Hello, I am trying to come up with a way to auto add new servers deployed with LSI raid cards to the MegaRaid Software management server. From the gui, it looks like I can add them by IP manually, or have the control server scan for hosts with the MegaRaid client software, which only works if the host is on the same network. Anybody ever work with this software and done something like this? --