similar to: Samba 34 + LDAP = hang?

Hi all, Does anyone have a working password syncing setup (where changing the password in Windows will change the unix password) with Samba 3.6? Thanks. -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." -- Andrew Tanenbaum GPG Fingerprint - 5596 B766

Hi, I have a FreeBSD 9.2 system running Samaba 3.6.12 and I am trying to setup password syncing so Windows users can change their passwords and have that change reflected in the FreeBSD password DB. I added the following to my smb.conf unix password sync = yes passwd program = /usr/bin/passwd %u passwd chat timeout = 10 However, when I change a password in Windows it

Hi, I have been experimenting with Samba 4 on FreeBSD 9 and after a lot of googling the core stuff is working (phew). However I have a few problems, I am trying to setup roaming profiles and the tutorials suggest creating the share and then using a windows client to set the ACLs on it, however to do that the user needs the SeDiskOperatorPrivilege priv, so I [midget 23:38] ~ >net rpc rights

On 26 May 2014, at 23:26, Charles Lepple <clepple at gmail.com> wrote: > On May 26, 2014, at 4:05 AM, "Daniel O'Connor" <doconnor at gsoft.com.au> wrote: > >> I've looked in upsc, upsrw and upscmd but none seem to have a suitable option. > > Is there a "battery.test" command, or similar? There are these commands.. test.battery.start.deep

Hi, I am trying to setup a FreeBSD 9.2 under Parallels and I find that I have to tell it to present IDE disks instead of SATA ones otherwise it gets timeouts probing for the disks. Is there some debugging I can enable to gather more information? -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there

Hi everyone, I'm having an odd issue with a Samba install - it starts SIGABORTing complaining that gencache.tdb has gone missing.. ie [2007/08/09 12:52:50, 0] lib/util_tdb.c:tdb_log(662) tdb(/var/db/samba/gencache.tdb): tdb_reopen: open failed (No such file or directory) [2007/08/09 12:52:50, 0] smbd/server.c:open_sockets_smbd(572) tdb_reopen_all failed. If I recreate it and restart

Hi everyone, We just got an MGE Comet EX 11 RT with extra battery (all 250kg of it..) and I have talked to it with NUT. One thing I see is the frequency.. input.frequency: 500 output.frequency: 500 It appears to be in tenths of a Hz vs Hz as I see on a Pulsar Extreme. I'm using NUT 2.0.3 on FreeBSD 6.1 Thanks. -- Daniel O'Connor software and network engineer for Genesis Software -

Hi, I have a system which monitors 2 UPSs, and it runs upslog twice. I had a problem with newsyslog rotating the log file because upslog keeps it open (arguably a bug IMO), but it also has no way of changing the PID file so newsyslog can't HUP it when log rotating. Attached is a patch which allows you to specify the argument for writepid() so you can differentiate them easily. -- Daniel

Hi, We have been testing an MGE Pulsar M 3000 and found that the lowbatt doesn't appear to do much. You can see it in the output of upsc but battery.charge.low is still the default. Setting battery.charge.low with upsrw does seem to 'stick' though so I we can use that. Mostly I'm wondering what the driver param is for :) -- Daniel O'Connor software and network engineer

Hi, I have an Eaton/MGE EX 11 RT UPS (uses the mge-shut driver) and while I was testing it I found that it would turn back on straight after power was restored. I had a look but I couldn't find a setting which would let me tell it to charge to (say) 50% before turning the load back on. Does anyone know if this is possible? A setting like this would provide some hysteresis for successive

Hi, In April 2009 you posted on the syslinux list trying to get FreeBSD booting from it. Did you succeed? I didn't see a reply confirming it. Also, what version of FreeBSD were you using? Thanks. -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing about standards is that there are so many of them to choose from." --

Hi, I'm trying to get a system with an Intel G33 video chipset in it (Supermicro C2SBA) working with the Intel driver but I'm not having much luck.. I took the patch from Hiroshi Nishida and added the G33 PCI ID's for it now I get agp/i810 attaching to it.. Matched G33 Matched for Intel G33 IG SVGA controller Matched G33 Matched for Intel G33 IG SVGA controller agp0: <Intel G33 IG

Hi, I saw your email here http://lists.alioth.debian.org/pipermail/nut-upsdev/2005-October/000243.html about the Liebert UPS protocol and I was wondering if it actually got in the NUT tree? I had a look in the 2.2.2 tree but I can only find the closed contact stuff :( -- Daniel O'Connor software and network engineer for Genesis Software - http://www.gsoft.com.au "The nice thing

Hi, I installed Samba 4.0.13 from ports and ran.. sudo mv /usr/local/etc/samba /usr/local/etc/samba.3 sudo mv /usr/local/etc/smb.conf /usr/local/etc/smb.conf.3 sudo vi /usr/local/etc/smb.conf.3 # Add realm entry sudo mv /var/db/samba /var/db/samba.3 sudo samba-tool domain classicupgrade --dbdir=/usr/local/etc/samba.3 --use-ntvfs /usr/local/etc/smb.conf.3 When I try and start I get.. sudo samba

We have several systems in remote locations and I have found that the ones in the US are having issues.. We are an Australian company and can't source a 110V UPS locally so we arrange to have one bought for the site when it's installed. It seems that in the US we are getting "Pulsar EX 1500" UPSs but locally we buy "Pulsar 1500". NUT seems to work find with the

I am running NUT 2.2.0 compiled from the FreeBSD ports tree. [inchoate 14:50] ~ >upsc ups1 at localhost battery.charge: 59 battery.charge.low: 20 battery.charge.restart: 0 battery.runtime: 6350 battery.type: PbAc battery.voltage: 43.0 driver.name: usbhid-ups driver.parameter.offdelay: 120 driver.parameter.ondelay: 13 driver.parameter.pollinterval: 2 driver.parameter.port: auto driver.version:

I made the following devd script.. sh cd /tmp fetch mkdir /usr/local/etc/devd sed -Ene 's/SYSFS\{idVendor\}==\"(.*)\", SYSFS\{idProduct\}==\"(.*)\", MODE=.*/attach 100 {\ device-name "ugen[0-9]+";\ match "vendor" "0x\1";\ match "product" "0x\2";\ action "chown @RUN_AS_GROUP@

I have an amd64 7.1 install on a SuperMicro C2SBA+ and I see the following in dmesg.. sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 sio0: type 16550A sio0: [FILTER] sio1: configured irq 3 not

Hi, I have an MGE Ellipse UPS connected to a FreeBSD 7.0 system and it works OK to begin with but after an hour or so it dies, eg.. Starts out OK.. debug level is '2' upsdrv_initups... Checking device (0463/FFFF) (/dev/usb2//dev/ugen0) - VendorID: 0463 - ProductID: ffff - Manufacturer: MGE UPS SYSTEMS - Product: ELLIPSE - Serial Number: 000000000 - Bus: /dev/usb2 Trying to match device

Hi, I have a FreeBSD 9.2 system with NUT 2.6.5 (installed via the ports tree) with an MGE Pulsar 1500 connected. A while ago it complained it needed the battery replaced and it was finally replaced last week, however I can't find out how to reset the flag in NUT. I've looked in upsc, upsrw and upscmd but none seem to have a suitable option. The UPS is connected via RS232 and upsc output