similar to: samba-3.5.2 - "getent group" not returning any info

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Well, I think this is not the only time you guys ever seen that kind of mails. First of all, I did checked all that is to be checked before writing to list. wbinfo -u and wbinfo -g work flawless. Also wbinfo -a, so I can authenticate without problems. The setup is a normal trust setup where domain X (my domain) trusts domain Y (another company).

good morning everyone. I apologize if it is recurrent. But not yet found a solution. I have a problem of slowness when running "wbinfo -u" command. Analyzing the outputs of "strace" command, I noticed some timeout. After several searches, I found information that indicated remove dead domains. I do not have these domains. I performed a fresh installation. My scenario is a

Good afternoon. Guys, I still can not solve this problem. Some help? Thanks 2014-09-26 11:17 GMT-03:00 Christovam Paynes Silva <christovamps at gmail.com>: > good morning everyone. > > > > I apologize if it is recurrent. But not yet found a solution. > I have a problem of slowness when running "wbinfo -u" command. Analyzing > the outputs of

As promised, I'm posting the smb.conf files for the two servers in question. One minor correction I should offer is that the new SAMBA server will be version 4.1, not 4.0. Following is SMB.CONF for the current PDC, which is Samba 3.3.4 on Slackware 13. I've omitted all share definitions to allow focus more on the configuration side. Actual server/domain names have been omitted.

On 12/02/15 02:43, soonerdave wrote: > As promised, I'm posting the smb.conf files for the two servers in question. > > One minor correction I should offer is that the new SAMBA server will be > version 4.1, not 4.0. > > Following is SMB.CONF for the current PDC, which is Samba 3.3.4 on Slackware > 13. > I've omitted all share definitions to allow focus more on the

This is an early userspace type question. I have an initramfs that does some root device setup, then tries to mount the real root partition and exec /sbin/init to start the real userland. It seems to do what I want, except that bootlogd hangs while mount /proc. I can't seem to figure out why. I'm booting with init=/bin/bash. bash is dynamically linked, and the appropriate libs are in

I started to have problems similar to ones described in the past on this list but could not find any kind of resolution. I did an lsmod, a mount command, and for fun, did an strace on shutdown to see where it is hanging, and an ltrace as well. Any thoughts? Module Size Used by parport_pc 28033 0 lp 15661 0 parport 38153 2

Hi! I don't know much about network programming, or about terminal handling. I wondered about why the command "scp file user at host:path" didn't work. It gave me the following error messages: "stdin: is not a tty" "Write failed flushing stdout buffer." "write stdout: Broken pipe" I tried it with different versions of ssh, first the newest debian

Running "syslinux -s /dev/dsb" during installation of Slackware64-14.1 (to make a bootable USB stick) fails like this: Error converting to codepage 850 Invalid argument Cannot initialize 'S:' Bad target s:/ldlinux.sys syslinux: failed to create ldlinux.sys But running the same command in the installed system succeeds. In both cases we are using syslinux-4.0.6 (same syslinux

I am having trouble with zttest on a Tyan board, dual AMD Opteron's on FC3. Tried different kernels, no IRQ sharing, everything looks in order. My zaptel modules load fine, but if I run zttest, it just hangs. Below is the strace output and you can see where it stops. Anyone have any ideas? [root@asterisktest zaptel]# strace ./zttest execve("./zttest", ["./zttest"],

Hi Volker and many thanks for your response According to your questions >Please remove the SO_RCVBUF and SO_SNDBUF entries. >Oh, that's ancient. Do you have any possibility to move to >"security=user"? The smb.conf file was inherited from HP-UX system. Ok, I'll remove them >Did you try "posix locking = no"? That is mostly criticial >if

strace output to my problem posted here on same list is http://xen.markmail.org/thread/ltl2faagvqdl4coh execve("/usr/sbin/xm", ["xm", "create", "centos5.cfg"], [/* 17 vars */]) = 0 brk(0) = 0x6c8000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f4868b02000

Hi, I'm rather new to this project, having stumbled across it earlier this afternoon, so forgive me if I'm still trying to find my way around. I was in the need of an alternative to NFS that would let me spread the task of sharing my downloaded source code files across a couple of boxes, and GlusterFS looked like a great candidate, having had no luck with Coda or OpenAFS. I also want

Hi! How to get usermod working with SSSD/389DS ? We have SSSD set up on our server and it uses 389DS. SSSD was enabled with the following command: authconfig --enablesssd --enablesssdauth --ldapbasedn=dc=example,dc=com --enableshadow --enablemkhomedir --enablelocauthorize --update Running for example "usermod -L username" returns: usermod: user 'username' does not exist in

Hello. I've tried to implement dovecot's deliver LDA to my home mailserver. I've run into troubles :) dovecot-deliver.conf: -- snip -- mail = maildir:%h/Maildir:INBOX=maildir:%h/Maildir mbox_read_locks = flock mbox_write_locks = flock -- snip -- when i run: deliver -d bfg < email.txt dovecot delivers message to ~/Maildir/maildir/new It acctually creates "maildir"

now that i have wineX compiling from cvs when i try to run wine i get: Client protocol error:(nil): lseek: Illegal seek even if i try wine --help here is the strace if its anyhelp execve("/usr/bin/wine", ["wine"], [/* 25 vars */]) = 0 uname({sys="Linux", node="fnord-rides-again", ...}) = 0 brk(0) = 0x804c47c mmap(0, 4096,

I am still unable to get the following command to work correctly. The x's replace the correct entry obviously. smbclient -Lboss -Uxxxxxx%xxxxxxxx I decided to run the command as root preceeded by 'truss' so I could generate a debug output. This is the output from the command without 'truss' Domain=[BOSS] OS=[Windows 5.1] Server=[Windows 2000 LAN Manager] Sharename

I have setup Centos-3.1 on a Dell Optiplex GX1 this week. It has to replace an old Compaq Deskpro I used as a firewall/router running the no longer supported RedHat 7.1. I have the NAT firewall up and running, and it works OK. However, there is one thing bugging me. I cannot use any client software that queries a nameserver. I tried to use "dig", "host" and

Hi I just tried to run the convert plugin as described at http://wiki.dovecot.org/Plugins/Convert (except with mail_location = maildir:~/Mail) It fails with an error message: Eopen(/.temp.falcon.endbracket.net.18618.8d5e0a038da6cf06) failed: Permission denied Error: imap dump-capability process returned 89 It looks like Dovecot execs /usr/libexec/dovecot/imap, which drops root privileges

it's not very helpful when the process exists without any output [root at srv-rhsoft:~]$ /usr/sbin/smbd -D [root at srv-rhsoft:~]$ /usr/sbin/smbd --foreground [root at srv-rhsoft:~]$ ps aux | grep smb root 8877 0.0 0.0 10904 960 pts/1 S<+ 15:04 0:00 /usr/bin/grep --color smb [root at srv-rhsoft:~]$ rpm -qa | grep samba samba-libs-4.7.4-2.fc27.x86_64