similar to: question on authentication

Greetings, I've just installed nut-2.4.1 on a Solaris 10 x86 machine to monitor a HP R3000XR UPS. SunOS babylon4 5.10 Generic_138889-08 i86pc i386 i86pc Solaris First of all, I encountered a single problem during the build. After configuring, drivers/Makefile ends up containing the following line: LIBNETSNMP_LDFLAGS = -R../lib -L/usr/sfw/lib -lnetsnmp -lgen [...] This is clearly

I'm just in the process of upgrading from nut-2.4.1 to 2.4.3 on a dual-Xeon box running Solaris 10 amd64 (i686-pc-solaris2.10). I configured as follows: ./configure --prefix=/opt/nut --with-gnu-ld --with-serial --without-usb --with-cgi --with-gd-includes=-I/usr/local/include --with-gd-libs="-L/usr/local/lib -R/usr/local/lib -lgd" --with-user=nut --with-group=nut

This is not a NUT question per se ... or at least, I don't think it is. I just replaced the battery pack in my HP R3000XR; the new batteries were shipped with 90% charge, were at about 87% when they went in, and were up to 98% charge the next day. Last weekend, the server that runs NUT went down for no apparent reason, wiping out its boot blocks, corrupting its boot archive beyond

I seem to have NUT all working with my R3000XR, except for the CGIs. The webserver's all properly configured and upsstats.cgi *runs*, but doesn't yield any useful output - no values are displayed, every value is replaced by [error: Invalid argument]. Apache is not logging any resulting errors, and there doesn't seem to be a lot of useful documentation on the CGIs to troubleshoot

I've just compiled and installed openssh-2.9.9p2 (compiled against openssl-0.9.6b using gcc-3.0.0) on a Slackware 7-based Linux machine (kernel 2.4.6ac2). The previously installed version was 2.9p2, compiled against openssl-0.9.6a, also with gcc-3.0.0, but with a different build of gcc-3.0.0. Everything seems to work fine except for one problem: passphrase matching for ssh2 keys

Many moons ago, Samba used to build perfectly on Linux. Ever since I upgraded from 2.2.3, though, I've had to hack the configure script to get it to build, because Samba's configure is utterly and unshakeably convinced that no file locking of any kind exists on Linux. Once so configured, it builds, tests and runs perfectly. Can anyone tell me why Samba started disbelieving in

Hi, I'm working on red hat linux8.0. I need to fetch files from windows. So i Installed samba on my linux machine. Can u please tell me how can i contact windows machine from linux and view files and copy that into linux? Do i have to install samba client for windows 2000?? if so, can u please tell me where can i get that and what to be done for installing the same. Pls help me in this

The scenario: I have two Samba servers on my network. One, running v3.0.37, is on my main server, a Solaris 10 x86 box. The other, just updated from 3.0.37 to 3.4.5 in the hope of solving this problem, is on my workstation, a Gentoo Linux box. The Linux Samba server shares only [homes]. The Solaris Samba server shares [homes] and four other shares. Unix UIDs are synchromized betwene the

I posted earlier about a problem with a HP R3000XR that was showing abnormally low charge a couple of days after replacing the battery pack. For those with R3000XRs, the progblem seems to be: (1) while you CAN hot-swap the battery-pack on an R3000XR, the UPS automatically goes into bypass mode when you do so; (2) it doesn't necessarily come OUT of bypass mode after you install the

On the basis of continuing experience, one final piece of R3000XR battery pack advice: After swapping the R3000XR battery pack, power-cycle the UPS, wait until the battery pack is at least 50% charged, then disconnect the UPS from wall power for a minute or so before plugging it back in. Until I did this, my UPS would charge the battery pack fully, then let it slowly self-discharge. After

On Fri, Feb 04, 2011 at 12:26:08PM +1100, Damien Miller wrote: > OpenSSH 5.8 has just been released. It will be available from the > mirrors listed at http://www.openssh.com/ shortly. I seem to have found a bug in 5.8p1. I work remotely, and use three SSH tunnels, two of the form ssh -L port:host:destport -f -N -q -l remoteuser remotehost, and one of the form ssh -D port -f -C -q -N -l

Greetings list, I've looked through the docs and lists and couldn't find an answer to this. Is there a way to make all windows spawned through an application that was started with -managed be managed as well? What I currently find is that the parent application is managed, but if that application spawns another, the child will not inherit the -managed flag and therefore run on top of all

Does anyone know if support for the Intel 875P/ICH5 motherboard chipset has yet made it into the stable branch? (Is release 4.9 likely to have it?) I am mainly interested in the IDE and "native" serial ATA devices. There is also a new Intel ethernet controller chip, 82547EI, that is designed to interface directly with the 875P chip. The currently supported chip list only goes up to

Hi, I''m having a weird issue and was wondering if anyone else had run into it. I recently upgraded from puppet 2.7 -> 3.0.1 After cleaning up some gems on my puppet master everything seemed to be working ok. I had originally used the EPEL repo''s to deploy puppet, but switched to the Puppet Labs repos so I could upgrade to 2.7 then 3. On RHEL5 only, I get a RSTRING_PTR

I installed the latest Codeweavers preview build (binary RPM, ugh!), and the DeskTopWindow error I was experiencing building from cvs is gone. All the font fixme warnings (which had, at one point, gone away) are back, and I'm back to the previous error I was getting before DeskTopWindow: babylon5:alaric:~:46 $ wine --debugmsg fixme-font d:\\install.exe Invoking /opt/wine/bin/wine.bin

Dear All, Can anyone recommend a TV-tuner card that works well on 4.x or 5.x Thanks in advance Regards Dmitry

I appear to have wine almost working, except for this: $ wine --debugmsg fixme-all d:\\<any .exe> err:win:GetDesktopWindow You need the -desktop option when running with native USER And no, this is the *only* error I'm getting aside from font fixmes. What do I need to do to fix this or figure out what's causing it? -- ********* Fight Back! It may not be just YOUR life at

I finally got around to writing myself a NUT UPS monitoring tool. NUT's UPS monitoring CGI tools provide a detailed instantaneous view of the UPS's state at any moment, but provide no history. The attached tool, upswatch, uses Kiss Gabor's UPS::Nut module and Tobi Oetiker's rrdtool to provide a graphical history of the major UPS operating parameters via a web browser.

Anyone can help? I continue without access from server: /etc/cron.daily/freshclam: ERROR: No servers could be reached. Giving up ERROR: No servers could be reached. Giving up ERROR: No servers could be reached. Giving up ERROR: No servers could be reached. Giving up ERROR: No servers could be reached. Giving up ERROR: No servers could be reached. Giving up ERROR: Update failed. Your network may

OK, can someone tell me what utterly moronic thing I am doing wrong? I have two roughly identical Linux system running NUT, and one works properly. The other almost does. The second system works well once everything is up, but after booting, the system does not have connectivity to the UPS. I have to manually run `upsdrvctl start backup`, `/etc/init.d/nut start`, and `upsd` to get NUT