similar to: BartPE cannot access samba share after upgrade

Hey list, I have an older 2005 Uniwill 259ia3 with a Phoenix bios. Flash booting is limited to keys 512 MB or less! Here's my setup recipe: used the HP utility v. 2.0.6 giving me this geometry ---------------- fdisk -l ----------- Disk /dev/sdb: 493 MB, 493879296 bytes 255 heads, 63 sectors/track, 60 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start

I'm trying to boot bartpe from gpxelinux I'm using gpxelinux and memdisk. my pxelinux.cfg/default looks as follows LABEL bartpe kernel memdisk initrd http://<path to iso> append iso raw Both of these I think I have working correctly. So my question I guess is for people that may have done this? Anyways I see the bartpe load screen then the xp load screen and then it blue

So I've been playing with this for hours and still unable to get everything working properly. In short I'm trying to boot an ISO image created by BartPE over pxelinux. When I attempt to do this it goes directly to a blank screen that just has a blinking cursor. Here's what my setup looks like: pebuilder.iso - the ISO file created from BartPE using WinXP SP2 CD as source but with

Can someone point me to instructions on booting BartPE with pxelinux.0 over the network. Thanks.

i think u should have a look at the VM Appliance UDA... it is a linux destro already setup to support BartPE ISO using PXE, as well as flat installs of windows XP. the beauty of it, is that is uses a web based GUI to handle the common configurations. http://www.ultimatedeployment.org/about.html also, u can see a cople of movies i have made ab using it on youtube. www.youtube.com/hotfortech using

Hi, I've read in some post in your mailing list there is a special version of startrom.0 which is possibile to load remote bart oe by xpe. Can you provide me it or teach me how to create my own one? 2) question: is it possible to create a multi bootcd with iso linux to load bartpe too? Thanks in advance

Watch Movies Online For Free Full Movie Downloads,stream movies online free,trailer, New Moon ,2012 ,Taylor Lautner,Twilight ,Precious ,Transformers: Revenge of the Fallen,Harry Potter and the Half-Blood Prince,Up,The Hangover,Star Trek,The Twilight Saga: New Moon,Monsters Vs. Aliens,Ice Age: Dawn of the Dinosaurs,X-Men Origins: Wolverine,Night at the Museum: Battle of the Smithsonian,The

Turns out that I did not have a corrupted ISO file and tftp-hpa is not at fault. I had saved the winnt.sif file in a unix format and for reasons that are not clear this was producing the error message telling me txtsetup.sif is missing or corrupt. One would think the parsing of the file would cause the inability to locate the ISO file to be downloaded since that information is the last line in the

Has anyone been able to boot a bartpe image successfully using pxelinux or does anyone know if this is impossible? For those who don't know, bartpe is a legitimate way to make a trimmed down installation of Windows XP or Server 2003 using your installation media. For more information on bartpe see: http://www.nu2.nu/pebuilder Basically the pebuilder gathers the minimum files needed to

Have a look at the 911cd forums. I wrote the initial thread on RAM booting WinPE. To answer to question... memdisk won't work with Windows. Windows uses 32bit access (direct HW access) and memdisk relies on the BIOS. Any programs that don't use the BIOS disk interfaces will not work. The other problem is the allocation of memory. Windows doesn't respect the memdisk allocation.

Hi, I've read in some post in your mailing list there is a special version of startrom.0 which is possibile to load remote bart oe by xpe. Can you provide me it or teach me how to create my own one? Thanks in advance

Can you send me your special startrom.com? Thanks.

I just encountered my only bug w/ the ISOLINUX+VESAMENU combination from 3.52-pre5. Updated a *working* CD project w/ the new ISOLINUX+VESAMENU combo just last week. Booting my preferred Linux distro (Slax-6) from my custom CDs work perfectly, however when I updated a CD project that includes BartPE/WinPE, BartPE fails to boot w/ 'CDBoot can not boot CD: error 4" msg. For the

I'm trying to boot multiple ISO files with pxelinux. Booting a single ISO file works, but if I put them in different sub directories it no longer works. I'm using the windows2003 sp1 trick to load my iso's (bartpe, winpe, erd commander, etc) pxelinux.0 gives me a menu: PROMPT 1 DEFAULT hdd TIMEOUT 100 DISPLAY PXE.MSG LABEL hdd LOCALBOOT 0 LABEL bartpe KERNEL

Hi mailing list, I'm working on PXE booting a BartPE (=Windows XP) system from a server running hpa tftpd. In the initialization phase the files are requested from the boot server by TFTP, later the transfer is switched to SMB. Most of the problems during this tftp phase can be solved with the remapping feature quite nicely like: *converting filenames into absolute paths *convert

I've commented inbetween the lines, but first do what Rowland already told you. When done, read on, some other pointers.   ... > > Dear colleagues and samba-experts, > > I installed a samba-file-server as a samba domain-member using debian > jessie-packages, following the samba-manual "Setting up Samba as a Domain > Member". > > I can access

Dear All: I made a change to my Samba configuration to enable Solaris ACLs in my Installation of Samba 3.0.11. After then, I lost the ability to permit domain users to browse the shares. The server is running Solaris 8 2/04, and Samba is bound against MIT Kerberos 1.4 and OpenLDAP 2.2.23. It authenticates to two Windows 2000 DCs. I had obtained a Kerberos ticket from the Domain Controllers,

Hi there! Dovecot-0.99.6rc3 barfs at me when I try to compile it on OpenBSD 3.2 or FreeBSD 4.7, both with the same error: [ ..snip.. ] gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/lib -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -c charset-iconv.c gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../src/lib -g -O2

On Fri, 26 Aug 2016, Peter Griffin wrote: > Use tabs instead of spaces. > > Signed-off-by: Peter Griffin <peter.griffin at linaro.org> > --- > drivers/gpu/drm/virtio/Kconfig | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) For my own reference: Acked-by: Lee Jones <lee.jones at linaro.org> > diff --git a/drivers/gpu/drm/virtio/Kconfig

On Fri, 26 Aug 2016, Peter Griffin wrote: > Use tabs instead of spaces. > > Signed-off-by: Peter Griffin <peter.griffin at linaro.org> > --- > drivers/gpu/drm/virtio/Kconfig | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) For my own reference: Acked-by: Lee Jones <lee.jones at linaro.org> > diff --git a/drivers/gpu/drm/virtio/Kconfig