similar to: Samba (problem with "password server = 192.168.0.20 192.168.0.30" line in smb.conf)

Hello I set up Samba 3.0.28,1 on a FreeBSD 6.3 host. I'd like users _not_ to see the hidden dot files in directories, but "hide dot files" doesn't work, no matter whether I put it in [global] or [homes]: ====== [global] workgroup = WORKGROUP netbios name = Samba hosts allow = 192.168.0. 127. log file = /var/log/samba/log.%m max log size = 50 socket options = SO_RCVBUF=8192

I am trying to mount a share on a remote machine using a miminal smb.conf as suggested in the Samba HOWTO. Nmbd and smbd are running on the target machine. The calling machine (server?) has the name of the target (linda2) in /etc/smbshares. When I try to mount I get the error message: Got a positive name query response from 127.0.0.1 ( 192.168.0.4 ) Connecting to 192.168.0.4 at port 445

Hi all, I've trying to use multiple password servers in my smb.conf. I'm using net utility for authenticating to a AD server. The behavious I see on 3.0.4 version of net utility is as following: 1: It tries to connect to first password server. 2: If first password server is down, it keeps on retrying for 3 min. 3: After three minutes, it tries second password server. 4: If second

Hi, I use winbindd and to use it I write my Active Directory Domain Controller in the "password server" directive in smb.conf. Since I have not one but two servers (for failover situations), can I write another password server?

Hello I've installed samba from ports (samba-2.2.6.p2_1) i configured /usr/local/etc/smb.conf [global] netbios name = SERWEREK workgroup = SIATKA security = share hosts allow = 192.168.0. 127. interfaces = rl1 bind interfaces only = Yes server string = Freebsd client code page = 852 dead time = 15 keep alive = 15 [Ogolne] path = /home/samba browseable =

snat not working my local ip is aaa.aaa.aaa.aaa asterisk sitting on the internet at ip bbb.bbb.bbb.bbb my firewall''s internal ip is 192.168.0.254 i did snat: iptables -t nat -A POSTROUTING -o ppp0 -j SNAT --to aaa.aaa.aaa iptables -t nat -L -v gives: Chain POSTROUTING (policy ACCEPT 23663 packets, 2182K bytes) pkts bytes target prot opt in out source destination 33056

Hi All My system is Freebsd 5.4 and Samba 3.0.21a. I am using ADS for system security. In my smb.conf, I create a share like that. [Test2] comment = Test path = /usr/tmp/ valid users = @"Domain Admins",@"Domain\myaccount" The domain administrator can access the share folder, but I can't. It keeps asking me the username and password. The samba is

I have a samba server at ip address aaa.bbb.ccc.ddd I can connect to it from clients on subnets aaa.bbb.eee. and aaa.bbb.fff. I can't connect to it from clients on ggg.hhh. smb.conf has hosts deny = all hosts allow = localhost, aaa.bbb., ggg.hhh. The client can successfully 'ping mysambaserver' (resolves to aaa.bbb.ccc.ddd). Doing 'net view \\mysambaserver' fails with

Hi I Have a problem: I'm sharing ~600 folders on my samba server: [SHARE 192.168.0.20] comment = Private share for host 192.168.0.20 browseable = yes writable = yes path = /var/archives/USERS/192.168.0.20 public=yes hosts deny = 192.168. EXCEPT 192.168.0.20 [SHARE 192.168.0.21] comment = Private share for host 192.168.0.21 browseable = yes writable = yes path =

I am seeing an issue with getting certain sip devices to be recognized as defined SIP clients host= in the sip.conf and the only deference that I can find btw sources that work and don't work is that devices that send packets with an Initial Via header of themselves appears to work and pick the context correctly but those that don't have the Via just get dropped in the context of the

Hi all, I have managed to setup a Fedora 7 box with 3 ethernet cards and two ADSL modem/routers from different suppliers as LARTC recommends. I am able to direct traffic for specific internal IPs either to one or the other ADSL line. However, I am faced with two problems I am struggling for the solution: 1. I have opened a few ports on the ADSL router/firewalls to talk to internal hosts; say when

yes, actually this scenario is on remote servers. like SIP/XYZ at 119.18.230.20:5060 SIP/XYZ at 202.68.0.90:5678 audio is ok when dialing without using ip & port as below SIP/XYZ but when i dial using below dialstring SIP/XYZ at 202.68.0.90:5678 or SIP/XYZ at 119.18.230.20:5060 then the problem arises hope you got the idea.. Nasir

I am trying to setup a simple Samba server using the instructions in the O'Reilly book "Using Samba" first edition on a Slackware 9.1 system which uses Samba 2.2.8a. The windows machine uses windows 98SE. The instructions under Server Configuration starting page 93 and Disk Share Configuration starting page 96 had me setup a very simple smb.conf which should then appear in Network

On Mon, 15 Feb 1999 23:47:50 -0500, Guy Dallaire wrote: .. >When I try to access a file or a subdirectory under the share, I get a message telling me "File not found", >or "this folder does not exist". > >I tried all sorts of upper/lower, preserve, case combinations in smb.conf, nothing seems to work. I tried >with debug level = 3 and I noticed a lot of

Hello, Hope everyone is enjoying their holiday! We setup two asterisk servers (From CVS on Wednesday) and set up IAX between the two. Right now they both reside on a switch with a static 192.168.0.x IP address. The first Server is .5 and the second is .30. Our dialplan seems to be working, however on the console we get a flurry of NOTICE and WARNING messages. NOTICE[1116941120]: File

No one care then i closed it. Thanks. On Fri, Jun 5, 2020 at 5:18 PM Jeremy <jeremy55662004 at gmail.com> wrote: > Hi all, > > I am using samba 4.10.7 and it seems to have bug for using @group in valid > or invalid conf (?). And i can't find fixed patch in later release. I > describe this issue detail below: > > 1. Firstly, there is my samba conf below (Add

When Kaspersky adds the following to smb.conf I can't connect from XP. If I comment out "vfs object" connection is restored. <snip> [store-00] # ADDED BY KASPERSKY ANTI-VIRUS FOR SAMBA SERVERS 5.0 vfs object = kavsamba5-smb-3.0.2 comment = File Directories path = /store-00 browseable = yes writeable = yes valid users = frank read only = no

Hi, I've successfully installed Fedora Core 4 as a server with default settings and running KDE. - fedorabox I've entered it into the DNS. I can ping it by its hostname and by its IP. And I can ping from it to my machine by hostname and IP. I'm trying to set up a share on fedorabox so I can copy files from my pc mypcxp (Windows XP) to fedorabox. We are on a AD domain (pdc in

On 14/06/2017 5:58 AM, Andreas Kersting wrote: > Hi, > > I would really like to have a way to split long string literals across > multiple lines in R. I don't understand why you require the string to be a literal. Why not construct the long string in an expression like paste0("aaa", "bbb") ? Surely the execution time of the paste0 call is

On 14/06/2017 6:45 AM, Andreas Kersting wrote: > On Wed, 14 Jun 2017 06:12:09 -0500, Duncan Murdoch <murdoch.duncan at gmail.com> wrote: > >> On 14/06/2017 5:58 AM, Andreas Kersting wrote: >>> Hi, >>> >>> I would really like to have a way to split long string literals across >>> multiple lines in R. >> >> I don't understand why