similar to: "net sam provision" and samba 3.4.0

Hello, I have upgrade my samba PDC from 3.xx (debian lenny) to 4.1 (debian jessie). ldap and samba shares work all fine. When I try to add a user I get the following smbpasswd -a foobar New SMB password: Retype new SMB password: ldapsam_create_user: Unable to allocate a new user id: bailing out! Failed to add entry for user foobar. I found this workaround

Dear according this wiki http://wiki.samba.org/index.php/Ldapsam_Editposix i have enable EditPosix extension but i receive this error Ignoring unknown parameter "idmap domains" How can i fix it ? Here it is my smb.conf : [global] workgroup = MSHOME netbios name = PC-DTOUZEAU server string = %h server disable netbios =no syslog = 3 log level = 10 log file = /var/log/samba/log.%m

Hello, we are trying to set up Samba with LDAP Backend. Using the Samba toolchain to add our existing users/groups, the net command seems to get confused about what users and groups are, if both have the same name and are used in the same context. Here is what I tried: ==commandline== -> Create the Domain Group # net sam createdomaingroup duplicate -U Administrator%pwd Created domain group

On 06/04/16 15:23, basti wrote: > Hello, I have upgrade my samba PDC from 3.xx (debian lenny) to 4.1 (debian jessie). > ldap and samba shares work all fine. > > When I try to add a user I get the following > > smbpasswd -a foobar > New SMB password: > Retype new SMB password: > ldapsam_create_user: Unable to allocate a new user id: bailing out! > Failed to add entry

Hi, I am more or less following this tutorial Ldapsam Editposix = http://wiki.samba.org/index.php/Ldapsam_Editposix but can't quite get my domain to work. I think the issue is with the idmap part of the smb.conf but can't quite figure out what's wrong with it or what the correct format should be. My SMB.CONF file.... #interfaces = lo0 em0 127.0.0.1 bind interfaces only = no

I've followed the instructions at http://wiki.samba.org/index.php/Ldapsam_Editposix which concerns how to setup idmap correctly with Samba > 3.0.25. I have a trusted domain which has been successfully established. However, no SID entries populate beneath ou=idmap and any logon to the trusted domain will result in: netr_LogonSamLogon: user SANDBOX\Administrator has user sid

Hello list, I'm trying this configuration: http://wiki.samba.org/index.php/Ldapsam_Editposix Everything works. I can add users, list users, delete users (and groups) with "net rpc user..." I can join clients, etc. *But* wbinfo -u and -g gives: zoolook@kvm-test-samba1:~$ wbinfo -u Error looking up domain users zoolook@kvm-test-samba1:~$ wbinfo -g BUILTIN\administrators

Oh dear, I apologise for my typo in subject. Obviously it should mean: EDITPOSIX SETUP. > Hi, > > i've setup the samba environment like described in the wiki: > http://wiki.samba.org/index.php/Ldapsam_Editposix > > I can now easily add windows user / machines when using the policies for > "Administrator". > > I have also setup unix account session

Hi, I'm specifically have a problem with idmap entries not being created in my LDAP backend for trusted domain logons - Local accounts appear to be fine. I have installed the Sernet enterprise packages from: http://ftp.sernet.de/pub/samba/experimental/rhel/5/i386/ I'm preparing the server as follows: 1. smbpasswd -w '<password>' 2. net rpc trustdom establish SANDBOX

Hi, i've setup the samba environment like described in the wiki: http://wiki.samba.org/index.php/Ldapsam_Editposix I can now easily add windows user / machines when using the policies for "Administrator". I have also setup unix account session auth via libpam_ldap, libnss_ldap like described here: http://www.gentoo.org/doc/en/ldap-howto.xml Some things i dont understand: 1. How

Hi Gruss, At this stage there is only one server, running 3.6.25 on Ubuntu12.04. The plan to get LDAP to work on this one. Then add the second server 4.x and the promote it to BDC and then demote this one. Just a side info, we didn't want to go tdbsam in both as I read it breaks the domain trust. The domain names are real ones. I ran the commands you suggested, nothing in reply. I tried

Hi all, I have a RHEL5-update 3 x86_64 system, and I installed Samba 3.2.14-40 (from http://ftp.sernet.com/pub/samba/tested/rhel/5/x86_64/ ). I'm using OpenLDAP ( 2.3.43-3.el5 ,comes with RHEL5u3) as backend for winbind+samba in my PDC. With samba-3.0.33 that comes with RHEL5u3, i dont get that "eventlogadm" works how explain in http://wiki.samba.org/index.php/Event_Logging: For

Hi all, I encounter a problem trying to join a Samba 3 domain with a Windows XP client. Checking the network traffic with Wireshark I can see that the client sends a logon request with an empty username and the samba server replies with "user unknown". This behaviour is the same no matter whether I try to join the domain via system properties or the netdom join command. I can find

Certainly: https://termbin.com/wr68 Thanks again! On 5/25/19 2:16 PM, Rowland penny via samba wrote: > On 25/05/2019 19:29, David Kowis via samba wrote: >> Hello! >> >> Running on FreeNAS 11 and my smb.conf (via testparm -v) is here >> https://termbin.com/v748 > > Do you want try again posting the smb.conf, but this time run 'testparm' > without the

Hi, I'm not a seasoned samba user but I do have a little experience with it (mostly small setups with plain smbpasswd file and a few workstations). I also have some experience with OpenLDAP and I've even written some objectclasses and attributes when the standard ones weren't enough However, I'm trying to set up a midsized network using LDAP for SSO and I can't make samba

On 26/05/2019 02:04, David Kowis via samba wrote: > Certainly: https://termbin.com/wr68 > > Thanks again! > OK, you are running Samba as an NT4-style PDC, though you don't seem to think so, because you have 'server role = member server', so I would remove the 'server role' line. I would change 'server min protocol = SMB2_02' to 'server min protocol =

Most of this is generated by FreeNAS's gui, so I'll have to figure out how to override it. I know where the file is, but I don't know if changes I make to it will actually stick, but that's for a different forum :) Just curious, since I appear to be running a PDC, is there a way to have a standalone samba server, and just get the user/password information from LDAP without doing

Hi, we are using a _single_ LDAP server as backend for _multiple_ Samba standalone file servers (security=user). This LDAP server serves mainly other purposes and access for Samba is read only so the situation is not optimal but "it works for us". Still I don't understand one phenomenon concerning visibility of LDAP groups. The LDAP configuration in smb.conf for all our Samba

Hello, I setting up a new PDC for a new domain using samba 3.2.0 I use LDAP as passwd/idmap backend. I started from scratch just creating the OU for the users/groups/machines/idmaps in the ldap directory, + a user used to bind to ldap. So from there I started winbind and ran net sam provision, which worked great. Now I plan this domain will have a one way trust with one other domain, and as I

Hi Guys! Probably this is not the best place to ask, I'll try anyway... =) I've been trying to configure a Samba PDC and a Squid Porxy server with NTLM auth on the same machine but NTML_AUTH keeps complaining about: NT_STATUS_INVALID_HANDLE.... I have others machines running Squid and Authenticating against a Samba Server but on different machines, this is the first time a try both on