Displaying 20 results from an estimated 900 matches similar to: "Failed to send packet on .255"
2009 Jun 09
1
why is my "nmbd" confused about network interfaces?
The only thing related to 'addresses' in my
/etc/samba/smb.conf file is a "hosts allow":
hosts allow = 192.168.3.0/24 127.1
I'm going to ignore the 'local hosts case, as if I solve the other,
the localhost case may get solved by inference.
I thought the 'hosts allow' would allow any host on the
local 192.168.3.0/24 subnet.
The hosts have no problems
2007 Nov 08
1
nmbd keeps trying to contact IP Address on wrong network
Looking for a solution to this problem. I have Googled all over the
place but haven't found a definitive answer.
I have a Samba Server that ONCE was on a network where there was SECOND
Samba Server with IP Address 192.168.20.3. Today, the FIRST server is
on a network with an address range 10.0.0.0/255.255.255.0 and it has no
way of finding that SECOND Server 192.168.20.3. However,
2004 Nov 20
1
Messages in log file every 5 min ... how to stop or redirect to a different log file.
Hi,
Semi-not new to samba, used a previous version a long time ago.
I'm using samba on SuSE 9.0, samba version 'Version 2.2.8a-SuSE'
2 network cards on this machine, eth0&1. I've enabled the samba server
on this machine and it is functional. However, i only want samba to
serve the file system on one of the network cards and not the other. Is
this just a simple
2003 Apr 11
2
Samba / Windows workgroup master browser problem
I admit theres a LOT about the windows networking I dont understand -
and even though this may NOT be a SAMBA issue per se, I thought I'd post
it here.
Have a 400gb samba server thats been working well (am upgrading to
current patches today, btw).
I've got 3 Win2k workstations, on two subnets, that have drives mapped,
and connect every morning on startup just fine. All the machines
2000 Jan 27
0
Samba is now a logon server for workgroup ... on subnet 127.0.0.1
I just finished setting up a Linux RedHat 6.1 system with Samba 2.0.5a. I
cannot browse the system from a Windows Nt Domain, but I can browse it just
fine from another Linux samba system...
The line:
[2000/01/27 14:41:47, 0]
nmbd/nmbd_logonnames.c:become_logon_server_success(118)
become_logon_server_success: Samba is now a logon server for workgroup
BERKELEY on subnet 127.0.0.1
looks
2014 Dec 05
0
Getting some fails in log.nmbd
Hi
I've got a home-made, small file server running on Samba 2.4.1.11 from
Debian Wheezy backports repo. I've noticed following lines in log.nmbd file:
[2014/11/17 22:54:00, 0] nmbd/nmbd.c:66(terminate)
Got SIGTERM: going down...
[2014/11/17 22:54:00, 0] libsmb/nmblib.c:856(send_udp)
Packet send failed to 127.0.0.1(137) ERRNO=Operation not permitted
[2014/11/17 22:54:00, 0]
2000 Mar 29
1
2.0.7pre2: multihomed_register_name error
rh61, 2.2.14.
The problem is in 2.0.6 also.
1st samba is wins server.
2nd samba uses the 1st samba as wins server.
All is ok, but if I use
interfaces = eth0 127.0.0.1
bind interfaces only = yes
(is there anything wrong in the above lines?)
in the 2nd samba, then I get the following in the log.nmb of the 2nd
samba:
[2000/03/29 15:45:30, 1] nmbd/nmbd.c:main(743)
Netbios nameserver version
2003 Oct 10
1
clients loose connection/cant save to samba server (samba-3.0.0-2)
hi,
i setup a samba-3.0.0-2 server under redhat 9. i added this server to a
win nt 4.0 domain controller. the nt domaincontroller only runs the
following services: wins, dhcp & pdc.
nothing more.
/etc/samba/smb.conf:
[global]
workgroup = SCHLICK-ROTO
server string = Server - File
hosts allow = 172.24. 127.
printcap name = /etc/printcap
load printers = yes
log file =
2004 Mar 22
1
Trust relationship failed...
I'm hoping someone can give me a hand in figuring out this problem, I have
seen several other similar problems in searching, but nothing that exactly
matches what I am seeing here.
I have recently migrated a client from a Samba server running 2.2.7 (Redhat
9) to 3.0.2 (Fedora 1). The samba installation is running as a PDC for 5
Win XP workstations and was working perfectly prior to the
2006 Oct 15
0
nmbd problems with secondary lo
When using the global options:
================================
interfaces = eth0, lo
bind interfaces only = Yes
hosts allow = 192.168.1. 127.
================================
and a secondary loopback address:
================================
~ # ip addr show dev lo
3: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet
2003 Jan 15
0
Problems with wins Server
I setup the samba server to be a wins server on my network when ever I browse the network it takes for ever to come up and sometimes it takes awhile to even to bring up the share or I don't see them. I am using lmhost on win xp system and the linux system for dns. When ever I do restart on the samba server it gives me this error. (shutting down nmb services ./smb: line 201: kill (6442) - no
2003 May 06
0
Issue with Mandrake 9.1 and Samba
I have a new MDK 9.1 server running iptables, pop, smtp, ftp, www, ssh,
and trying tio get samba up on it. The box has two nic's in it. inside
net is 192.168.1.0/24 the outside is a /28 net I have uip forwarding
running and also shorewall. I also have an older Samba box running on
the internal net. The problem is this. All the winblows boxes can see
the old samba server but not the new server.
2001 Dec 05
0
digital unix problem
SEND: Teoman TURHAN
Hi teams.
I installed samba 2.0.9 on Alpha server TRU64 unix 4.0F. But I cannot configure --with-dfs because this Tru64 unix was installing chosed filesystem type UFS filesystem. but I used ./configure command and make and make install.
I installed ADVFS file system 2 days ago samba 2.2.2 on TRU64 unix. but I don't live a problem. all services were running.
UFS BUG
2000 Mar 31
0
TNG-1.0.5 Problems
Hi...
I have exactly the same problem with lsarpcd giving the error "ERROR:
setgroups call failed!".
Anyone know of a fix??
MWP
> Hello
>
> I was just installing the new TNG 1.0.5 and after i installed and cleaned
the
> logs i started the dameons and was unable to access the shares on win98.
The
> computer showed up in Network Neighborhood but i would get a \\comp03
2004 May 10
0
Newbie multiple problems no solutions
Hello,
I installed recently a samba server 3.0.0-15 on Fedora as PDC, it works
- generally speaking - but i have a few problems with it (I should begin
with "i'm samba virgin - my first time :) ). So, first thing, i was
expecting to have something like windoze network neighbourhood in
konqueror (smb://), meaning all computers from my network browseable no
matter what system they
2011 Apr 26
1
samba loses to be the master browser
Hi all
I have an Opensuse 11.1 64 bit acting as a PDC with all this pachages:
samba-3.4.5-3.1
bind-9.5.0P2-18.1
dhcp-server-3.1.1-6.3
openldap2-2.4.12-5.3
It was working great for the first 6 months as a logon and file server for around 40 windows computers. But lately from time to time the samba server loses to be the master browser, and the only way to solve this problem is rebooting de entire
2023 Dec 28
2
winbind offline logon
Hi all!
As a die hard slackware user and as a part of my learning pam process I installed debian bookworm (12.4.0) in a vm and setup a domain member server per the instructions in the wiki trying to figure out how debian does it so I can correct some issues I have with how it's done in slackware.
Everything seems to be working fine except for the winbind offline logons, what I tried was to
2006 Sep 21
1
current master browser = UNKNOWN / failing WINS test #1 on 3.0.23c
I am having trouble with one of my samba PDC's. It does not recognize
itself as the domain master browser even though it is set to be so. I
can not add machines to this domain and I suspect this is why. Has
anybody seen this or know what causes it? Notice this:
DOMAIN_ALBANY(3) current master browser = ALBANY_PDC
DOMAIN_NYC(2) current master browser = NYC_PDC
2004 Oct 05
2
Can join domain; can't logon
I had a problem similar to my current one a week or so ago, and I was
encouraged to upgrade from Samba 2.2.9 to 3.0.7, which I did. Now
that I've completed that nightmare, the problem I initially set out to
fix is still there, just different. Namely:
I am trying to set up Samba 3.0.7 on a SuSE 9.1 box as an LDAP PDC
whose only job will be authentication. Our LDAP server is on a
separate
2004 Sep 21
2
login from XP
Hello,
I'm having a problem logging in to the Samba domain from an XP machine. The machine is added to the domain but after reboot I can't login. I've done the signorseal registry hack but I'm still not able to login. The error I get when logging in is this:
"Windows cannot connect to the domain, either because the domain controller is down or otherwise unavailable, or