similar to: why is my "nmbd" confused about network interfaces?

I admit theres a LOT about the windows networking I dont understand - and even though this may NOT be a SAMBA issue per se, I thought I'd post it here. Have a 400gb samba server thats been working well (am upgrading to current patches today, btw). I've got 3 Win2k workstations, on two subnets, that have drives mapped, and connect every morning on startup just fine. All the machines

Looking for a solution to this problem. I have Googled all over the place but haven't found a definitive answer. I have a Samba Server that ONCE was on a network where there was SECOND Samba Server with IP Address 192.168.20.3. Today, the FIRST server is on a network with an address range 10.0.0.0/255.255.255.0 and it has no way of finding that SECOND Server 192.168.20.3. However,

Hi, Semi-not new to samba, used a previous version a long time ago. I'm using samba on SuSE 9.0, samba version 'Version 2.2.8a-SuSE' 2 network cards on this machine, eth0&1. I've enabled the samba server on this machine and it is functional. However, i only want samba to serve the file system on one of the network cards and not the other. Is this just a simple

When using the global options: ================================ interfaces = eth0, lo bind interfaces only = Yes hosts allow = 192.168.1. 127. ================================ and a secondary loopback address: ================================ ~ # ip addr show dev lo 3: lo: <LOOPBACK,UP,10000> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet

SEND: Teoman TURHAN Hi teams. I installed samba 2.0.9 on Alpha server TRU64 unix 4.0F. But I cannot configure --with-dfs because this Tru64 unix was installing chosed filesystem type UFS filesystem. but I used ./configure command and make and make install. I installed ADVFS file system 2 days ago samba 2.2.2 on TRU64 unix. but I don't live a problem. all services were running. UFS BUG

Hi all! As a die hard slackware user and as a part of my learning pam process I installed debian bookworm (12.4.0) in a vm and setup a domain member server per the instructions in the wiki trying to figure out how debian does it so I can correct some issues I have with how it's done in slackware. Everything seems to be working fine except for the winbind offline logons, what I tried was to

I made progress in tracking down a problem on cygwin that's been bothering me for a while since Win7 and domain. when I do: > mkpasswd -D mkpasswd (434): [31] A device attached to the system is not functioning. A network trace shows that it's trying to get the home dir information from my main user. Wwhen it queries the info Samba returns STATUS UNSUCCESSFUL (indicated in network

Hi All, On my first internal NIC, Samba is working perfectly. On my new, second internal NIC, I am getting the following in my messages log: libsmb/nmblib.c:send_udp(793) Packet send failed to 192.168.254.255(138) ERRNO=Operation not permitted nmbd/nmbd_packets.c:send_netbios_packet(163) send_netbios_packet: send_packet() to IP 192.168.254.255 port 137 failed I though .255 was a reserved

Hi... I have exactly the same problem with lsarpcd giving the error "ERROR: setgroups call failed!". Anyone know of a fix?? MWP > Hello > > I was just installing the new TNG 1.0.5 and after i installed and cleaned the > logs i started the dameons and was unable to access the shares on win98. The > computer showed up in Network Neighborhood but i would get a \\comp03

Hi all, I am trying to set up an linux server that allows users to log in via their windows UPN names rather than their SamID's. I have set up two test boxes: debian linux 7 running Winbind Version 3.6.6 Ubuntu Linux 14.04 running Winbind version 4.1.6-Ubuntu. smb.conf is at bottom of this post. I've bound both linux boxen to our Active Directory Server running 2008R2 and can return

Hi all I have an Opensuse 11.1 64 bit acting as a PDC with all this pachages: samba-3.4.5-3.1 bind-9.5.0P2-18.1 dhcp-server-3.1.1-6.3 openldap2-2.4.12-5.3 It was working great for the first 6 months as a logon and file server for around 40 windows computers. But lately from time to time the samba server loses to be the master browser, and the only way to solve this problem is rebooting de entire

I'm hoping someone can give me a hand in figuring out this problem, I have seen several other similar problems in searching, but nothing that exactly matches what I am seeing here. I have recently migrated a client from a Samba server running 2.2.7 (Redhat 9) to 3.0.2 (Fedora 1). The samba installation is running as a PDC for 5 Win XP workstations and was working perfectly prior to the

---- I have a bunch of these in my log... Was wondering if anyone had seen them before and what the cause might be? Thanks... Oct 1 03:25:15 Ishtar smbd[23925]: [2011/10/01 03:25:15, 0] lib/util.c:1468(smb_panic) Oct 1 03:25:15 Ishtar smbd[23925]: PANIC (pid 23925): internal error Oct 1 03:25:15 Ishtar smbd[23925]: #1 /usr/sbin/smbd(smb_panic+0x55) [0x7f7120093134] Oct 1 03:25:15

I just finished setting up a Linux RedHat 6.1 system with Samba 2.0.5a. I cannot browse the system from a Windows Nt Domain, but I can browse it just fine from another Linux samba system... The line: [2000/01/27 14:41:47, 0] nmbd/nmbd_logonnames.c:become_logon_server_success(118) become_logon_server_success: Samba is now a logon server for workgroup BERKELEY on subnet 127.0.0.1 looks

Hi I've got a home-made, small file server running on Samba 2.4.1.11 from Debian Wheezy backports repo. I've noticed following lines in log.nmbd file: [2014/11/17 22:54:00, 0] nmbd/nmbd.c:66(terminate) Got SIGTERM: going down... [2014/11/17 22:54:00, 0] libsmb/nmblib.c:856(send_udp) Packet send failed to 127.0.0.1(137) ERRNO=Operation not permitted [2014/11/17 22:54:00, 0]

rh61, 2.2.14. The problem is in 2.0.6 also. 1st samba is wins server. 2nd samba uses the 1st samba as wins server. All is ok, but if I use interfaces = eth0 127.0.0.1 bind interfaces only = yes (is there anything wrong in the above lines?) in the 2nd samba, then I get the following in the log.nmb of the 2nd samba: [2000/03/29 15:45:30, 1] nmbd/nmbd.c:main(743) Netbios nameserver version

hi, i setup a samba-3.0.0-2 server under redhat 9. i added this server to a win nt 4.0 domain controller. the nt domaincontroller only runs the following services: wins, dhcp & pdc. nothing more. /etc/samba/smb.conf: [global] workgroup = SCHLICK-ROTO server string = Server - File hosts allow = 172.24. 127. printcap name = /etc/printcap load printers = yes log file =

I have a regular script I run to make static "snapshots" of my home file system, with each being all the files that changed in the past 24 hours. I just moved my home partition to a new harddisk w/more space. I ran the util and have gotten odd results each time I ran it. This one bothers me... as I'm not sure why the attrs would be missing. How can the names be transfered but no

Samba errors with smb QUERY_PATH_INFO, Error: STATUS_OBJECT_NAME_NOT_FOUNDFrom: Timothy D Newcomb Subject: Samba errors with smb QUERY_PATH_INFO, Error: STATUS_OBJECT_NAME_NOT_FOUND > Did you get an answer for this ? I am seeing it on an XP box and I have > the same problem..slow load time...in "my computer" Tim, No I didn't, thanks for the reply. I just figured that

Hello, I use Samba 3.5.11 from debian. I'm trying to add new Win7Pro to domain, but I still get error: "The specified domain either does not exist or could not be contacted". using wireshark I can see SMB_NETLOGON 279 SAM LOGON request from client SMB_NETLOGON 270 SAM Response - user unknown SMB_NETLOGON 279 SAM LOGON request from client SMB_NETLOGON 270 SAM Response - user unknown