similar to: samba 3.2.4 WINs problem

Hi to everybody, I want create a VPN with some PC clients and only one server, instead of LAN-to-LAN, but I'm not very sure how to do this. For example, I need to have: - Server LAN -------- (192.168.0.1/24) ---- tinc-VPN ---- (192.168.100.1/24) - Client-01 LAN --- (192.168.50.1/24) ---- tinc-VPN ---- (192.168.100.10/24) - Client-02 LAN --- (192.168.80.1/24) ---- tinc-VPN ----

I try to setup networking with a fresh CENTOS4.4 installation. Upto now I have 20 installations, most of them FC3/FC4 and RHEL3. I noticed that the default gateway is not setup properly when using Centos. [root at raaf ~]# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.101.0 * 255.255.255.0 U 0 0

I have 2 asterisk servers - serverA and serverC - connected via IAX2. On serverA, I have a "telemarketer hold" extension which, if I transfer a caller into it, loops around playing music & "please wait" messages, until they give up & hang up the phone. Also on serverA, I have a custom devstate, which lights a lamp on a phone connected to serverA, which tells me if

Hello All, I'm new to the list and I don't have much of experience with samba. I have a test setup on CentOS 7.8 with samba-4.10.4 and samba-vfs-glusterfs . When my client mounts the samba share via vers=1.0 , the user sees the share properly (uid,gid,mode are just like on gluster). When the share is mounted with vers=2.0 or not specified (anything higher) the files are owned by

I've got 2 asterisk servers on the same box: ubuntu 10.04 lucid. I have not been able to send useful callerid info between them (callerid becomes "serverB"). serverA register statement: (serverB has the exact opposite statement) register => serverA:serverApassword at IP_of_serverB_nic/serverB users.conf of serverA: users.conf of serverB: [serverB] [serverA] type=friend

Hi, I created new host keys on serverA, updated sshd_config accordingly (adding the line below) and restarted ssh: cd /etc/ssh sudo ssh-keygen -f 2024_ssh_host_ed25519_key -t ed25519 -N '' sudo vi /etc/ssh/sshd_config # added line: HostKey /etc/ssh/2024_ssh_host_ed25519_key sudo service ssh restart When I connect to serverA (`ssh -v -o UpdateHostKeys=yes serverA`) afterwards,

this is the case: serverA [ CentOs 5.6 kernel 2.6.18-238.12.1.el5.centos.plus, Samba ver. 3.5.21 ] serverB [ CentOS 5.6 kernel 2.6.18-348.1.1.el5.centos.plus, Samba ver. 3.6.6-0.129.el5 ] clientA [ WindowsXP ] clientB [ WindowsXP ] The serverA shares via Samba the resource [test] [global] workgroup = DMIT netbios name = SAMBA server string = DMIT domain server interfaces = eth0

On Sun, 13 Oct 2024, Jan Eden via openssh-unix-dev wrote: > Hi, > > I created new host keys on serverA, updated sshd_config accordingly > (adding the line below) and restarted ssh: > > cd /etc/ssh > sudo ssh-keygen -f 2024_ssh_host_ed25519_key -t ed25519 -N '' > > sudo vi /etc/ssh/sshd_config > # added line: HostKey /etc/ssh/2024_ssh_host_ed25519_key >

Hi Felix, thanks for the share. Sadly it doesn't work and I don't know how to start debugging this one. I tried your config (had to switch from domain member to standalone) but it's the same: [global] ??????? netbios name = yourName ??????? workgroup = yourWorkgroup ??????? realm = YourRealm ??????? log file = /var/log/samba/log.%m ??????? max log size = 50 ??????? security = ads

hi all, I am trunking via iax2 2 asterisk serverses if both of them have static ip addresses, I can connect them using no password, password or auth rsa with a pair of keys. If one of them has dynamic ip address and need to register on the other server, I can connect them with no password, but I am not able to do that using keys. The question is: which is the right register syntax to use when

Hi, I am trying to connect two Asterisk servers using IAX2. Everything works fine when I couple them within a LAN segment, but not when I connect them using WAN connections. I made sure that the routers' ports are mapped properly and checked this with additional ssh rules. ServerA is a Raspberry box with the vendor's Asterisk version 1.8.13.1 and ServerB is normal CentOS 7 box with

hi I just joined this list, as I am having really strange issue and so far been unable to find the root cause.I will give you scenario to see if anyone knows what could be the cause: 1: 2 windows 64bit enterprise server serverA and Server B 2: both on same physical network no firwalls not routers 3: both on same domain controller ( windows NT4) I can connect to serverA as under from a linux

Hello List, i would like to copy/mirror/rsync the backup files from ServerA to ServerB. Since i must assume that ServerA is hacked (public server with a few services), i would like to "pull" the files to ServerB (save server with no services). That means i do something like: rsync -avz ServerA:/backup ServerB:/backup IF ServerA gets hacked and the files get zeroed out (every file

Hi, i have a smba 3 working, and I? m trying to build dfs .When I set up my dfs this way: ln ?s msdfs:serverA\\shareA name, or ln-s msdfs:serverA\\shareB, it is working! But if I try ln-s msdfs:serverA\\shareA,serverA\\shareB name, I only can get the first share (shareA) in the network. Have someone did it and how can I succeed ? Daniel

All, I have 3 servers. All 3 are CentOS 5.5. All 3 have identical /etc/ssh/sshd_config files. I used ssh-keygen (with no arguments) to generate keys with no password. I then added all 3 id_rsa.pub keys to the authorized_keys file. With this set up, I should be able to ssh between all 3 boxes without needing a password. The problem is that one of the servers keeps asking for a password even with

Hello, Here is my problem: A rsync daemon is started on serverA with the root user. Now if I try to sync serverA to serverB : rsync -nPru --delete serverA::test/temp/ /temp/ the behavior is just perfect and everything goes well. Now if I try to switch the server : rsync -nPru --delete /temp/* serverA::wwwroot/temp/ the delete option is not working (the files that are not on the sending

I was able to workaround the ?Error: sync: /var/run/dovecot/auth-userdb: Configured passdbs don?t support credentials lookups (to see if user is proxied, because doveadm_port is set)? problem:? => I simply disabled ?doveadm_port? and added the port number at the end of the remote URL in ?mail_replica? Replication seems to work although I have regular errors (idk if they are related to each

Can someone help me understand the overall picture of SSL certificates in this scenario? I have a working dovecot/postfix/mysql server. It has a certificate. I now want to create a second, essentially duplicate configured server for use with replication. What is the relationship between the certificate and the hostname, or the DNS entry since the certs are created using the server?s domain

Hi, we use a current Debian etch distribution as basis for our servers, which are running within a vmware server environment. Our current configuration consists of a dovecot server with imap enabled and a ldap based authentication. Mails are stored using the Maildir format on a central nfs store. We do not use any virtual mailboxes. Since upgrading from dovecot version 1.0.rc15 (debian

Hi, My nightly rsync jobs recently began to fail. I don't recall making any modifications to the rsync config files or upgrading rsync. Below is the error I receive when I try to rsync the home directory of serverA to serverB. Is there anything obviously wrong? Thanks. serverA rsync # rsync -arczv --delete --password-file=/etc/rsync/rsync.password /home 192.168.1.4::home @ERROR: auth failed