similar to: Upgrade from SLES9 3.0.20 to 3.0.26a breaks getent

I recently brought up our fifth Samba domain member server with 3.0.26a-0.9-1787-SUSE-SLES9 against an NT4 domain on a new subnet. The subnet also has an NT4 BDC that is working correctly. Wbinfo and getent both work properly but users can not get to the [homes] service but can get to another share that is on the same system. If I setup a share definition in smb.conf for myself as a home

We have setup a Samba member server using Winbind (3.0.14a and NT4). I am trying to "map" the NT Domain ids to root (root = admin administrator rdehn) but this seems to be ignored when I try and connect to a share. The "username map = /etc/samba/smbusers" line is in the Global section of smb.conf and testparm is OK. What am I missing? Is this not possible? Thanks in

Hi All, I have a WD RE4-GP which dropped an Adaptec 51645 RAID controller. I ran a smartctl short test on the drive and it failed with a read error. So I ran the Western Digital's own diagnostic software (DLGDIAG), both the short and extended test on the drive and it passed with no errors. So I ran the smartctl short test again and again it failed. I then ran smartctl long test and that

After recent Samba updates to one of our SLES10 SP1 systems users who open and save Excel 2007 files end up with the Read-only attribute set on the file. I had this same problem with the 3.0.28 update and the only solution I found was to roll back to the previous version. My understanding was that 3.0.32 should fix this. Did I miss something? Are there smb.conf changes that need to be made

Is there a way to get a list of all the classes available from the puppet master? I have 2 goals for this - one is documentation in a human readable form, and the other is potentially importing that data into dashboard. I did find some info on the rest API (http://docs.puppetlabs.com/guides/rest_api.html#resource-types ) but I can''t make any sense of the output from it. Thanks.

I''m running puppet in a local VM to do some testing, and all of our systems are behind a proxy. I''ve got the http_proxy environment variable set properly, but when I try to use puppet module install <foo> it doesn''t seem to honor it and can''t connect. I used wget to download it, but even when I use modulepath it still tries to connect to the forge and

I''m setting up a dev / test environment using a couple of Ubuntu 12.04 VMs. I have puppet installed on one of them, and am trying to get it to sync against itself to get certain things in place to distribute with the nodes. However, I am having some issues. # puppet agent --test info: Creating a new SSL key for puppet-local-master err: Could not request certificate: getaddrinfo: Name

Support for SLES9 seems to be pretty much lacking at the moment. The OCFS2 site [1] states OCFS2 is supported with SP2+. There actually does not exist a SP2+ for SLES9 (or should this rather read "will be supported in SP3" instead?). Latest RPMs that come with SLES9 SP2 are 0.99.14 which has critical known bugs and is unusable. Anybody got to compile current source on SLES9 x86_64?

Haven't really tried this yet, but I'm wondering what the direction is for official ocfs support on SLES9. Anyone know if there are plans to support OCFS 1.x on sles9 at some point? I know it's a 2.6 kernel instead of 2.4... thanks, Jeremy This message (including any attachments) contains confidential information intended for a specific individual(s) and purpose, and is protected

Hello, I've been unable to succeed with Samba-Ldap setup on SLES9 until this evening. I thought I had a PAM issue but that was not the case. To cut to the chase, I ran Yast's 'ldap-server' module without any changes as it found the ldap server settings. Once finished I could join the domain from XP Pro which is what I was unable to do. I checked what Yast did and it reset

We are trying to install a 32-bit SLES9-SP4 paravirtual machine on a 64-bit SLES10-SP1 Dom0 host from scratch. We have two problems: 1. The YaST2 VM creation tool fails to create a vm if a network card is selected. 2. The initial vm boots from the SLES9-SP4 iso file, but then complains it can''t find the installation source. Here is the /etc/xen/vm/file (after manually editing for a

Anyone managed to get a SLES9-SP4 HVM installed? I''ve been going round in circles for hours with this one. What I''ve found out: 1 - I can''t install from an emulated cdrom. The installer does boot from the cdrom, but later gives up, saying that it can''t find the install CD. I''ve done all sorts of messing around with virsh and the qemu monitor, but

Hello, I try to compile pigeonhole ( hg clone from yesterday ) on SLES9 I get the following error: ---- snip cd dovecot-2.0-pigeonhole ./autogen.sh configure.in:17: option `tar-ustar' not recognized autoreconf: automake failed with exit status: 1 --- snap automake-1.8.3 autoconf-2.59 I found something similar here: http://osdir.com/ml/science.robotics.orocos.devel/2006-03/msg00029.html

hi, just to complete the story: i downloaded the iso-images of SLES9-SP4_x86_64 from novell and found inside ocfs2-tools and ocfs2console, both version 1.2.1. :-( we solved our problem without resizing the FS for now, but it would have been less complicated with resizing. perhaps we should consider upgrading to SLES10... :-D greetz, thomas

I'm running Samba 3.0.9 on SLES9 as a domain member with an NT4 PDC, using winbind to authorise domain users. I have set up a general share for all users which works fine and is accessible by all users but I am unable to set up the home shares correctly. When attempting to connect via smbclient I get the following:- tree connect failed: NT_STATUS_ACCESS_DENIED What does this mean and where

Hi, I have recently discovered the project along with the PhoneJacks produced by quicknet, they could be the answer to something I have been looking into. I would like to be able to test using a dial-in server & possibily also a Windows RAS server, however I only have 1 phone line. I was thinking that I create a setup like that illustrated below to solve the problem:- Ext 1000

Hi Mark, I had this same issue trying to install SLES9SP4 PV on to SLES10SP1 host. You cannot do this. You can however install a SLES9SP4 FV guest. If you want a PV SLES9SP4, you will need SLES10SP2. -A _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

> good morging, > > I need to install R-2.x on my host: > > Linux, 2.6.5-7.308-smp #1 SMP Mon Dec 10 11:36:40 UTC 2007 x86_64 > x86_64 x86_64 GNU/Linux > > now I have check the packages on your document: > http://cran.r-project.org/bin/linux/suse/ReadMe.html > but I have a problem whit xorg-x11-lib, in my host I have installed > package:

Hello, I am running Suse Linux Enterprise Server 9, and I am trying to get Samba to authenticate using LDAP. I am using the YaST system tool to configure the LDAP server, LDAP client, and SAMBA. The issue I am having is that after I configure the Samba server to use the LDAP backend it prompts me for a password creation for the root user. This root user will be added to the LDAP

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 This patch teaches the sles9 spec file to understand that configfs is built conditionally, and may not be present in the output. - -Jeff diff -ruNp ocfs2-1.2.5/vendor/sles9/ocfs2.spec-generic.in ocfs2-1.2.5.devel/vendor/sles9/ocfs2.spec-generic.in - --- ocfs2-1.2.5/vendor/sles9/ocfs2.spec-generic.in 2007-03-27 15:54:15.000000000 -0400 +++