similar to: samba-3.0.24 on openbsd: low throughput

I have seen a ton of messages on the list in the archives in reference to this but have not been able to find an answer to it. I will try to give as much info as possible so forgive me if this messages turns out to be long. Running FreeBSD 4.10 Samba 3.0.7 IBM e305 Server P4 2.0ghz 1gig of ECC Memory Boot Drive 40gig IDE Data Drive 250gig 8meg cache IDE 2 built in Gigabit Controllers

i have been running postfix + courier-imap + cyrus sasl for several years and have some prior experience with dovecot + postfix and had no problems. now that i'm trying to convert an existing courier-imap configuration to dovecot and all the various parts work together (e.g. mail delivery and dovecot sasl), i cannot get the folder subscription issue sorted. the machine is running netbsd

I have some questions about what needs tuned on a high traffic syslog box. I seem to be dropping quite a few syslog packets. This is a syslog server for a high usage Firewall btw. Nic is a Compaq tl0 4.8-P13 netstat -s -p udp | grep buf 19,762,079 dropped due to full socket buffers uptime 5:28PM up 7 days, 18:30, 2 users, load averages: 0.21, 0.23, 0.23 I though maybe syslogd was the

Hi, I´m using Tinc for several years, but I didn´t fix a performance problem. There a about 20 nodes in this network. Master: 10.0.0.12 (dedicated host in a datacenter, debian, 100mBit port) tinc.conf: Name = TincKnoten12 AddressFamily = ipv4 Interface = tun ProcessPriority=high mode = router #DirectOnly = no Compression=0 PMTUDiscovery = yes #IndirectData = yes #ReplayWindow = 64 #ConnectTo

So i was playing around with Samba multi channel and it was not working as i originally expected it. I have two hosts: my workstation running up to date Windows 10 with 2 interfaces my server running Gentoo with Samba 4.5.4 with 2 interfaces (all connected to the same network) workstation has IPs 192.168.2.114, 192.168.2.115 server has 192.168.2.16(enp2s0f0),192.168.2.17(enp2s0f1) i'm

Hi, Was wondering if there are any plans to update either the kernel structures and/or netstat to show more than 4GB of traffic stats. For example, on a 4.8-STABLE machine: $ netstat -bI sis0 Name Mtu Network Address Ipkts Ierrs Ibytes ... sis0 1500 <Link#2> <mac-addr-hidden> 8789598 0 4103727771 ... <non-relevant parts removed> This shows that

Hello list, I'm using Samba 3.4.5 on a home-hosted fileserver of mine to easily share files with both GNU/Linux and Windows XP (Professional 32Bit SP3) clients. The machines are connected to each other via a switched GBit ethernet network, the actual available bandwidth between the server and the nodes over TCP amounts to about 940-980MBit (according to iperf). The server's storage

http://bugzilla.mindrot.org/show_bug.cgi?id=1364 Summary: default for ChallengeResponseAuthentication doesn't match sshd_config Product: Portable OpenSSH Version: 4.7p1 Platform: Other OS/Version: Other Status: NEW Severity: normal Priority: P2 Component: sshd AssignedTo:

Hi, I installed Samba 4.0.13 from ports and ran.. sudo mv /usr/local/etc/samba /usr/local/etc/samba.3 sudo mv /usr/local/etc/smb.conf /usr/local/etc/smb.conf.3 sudo vi /usr/local/etc/smb.conf.3 # Add realm entry sudo mv /var/db/samba /var/db/samba.3 sudo samba-tool domain classicupgrade --dbdir=/usr/local/etc/samba.3 --use-ntvfs /usr/local/etc/smb.conf.3 When I try and start I get.. sudo samba

Hello list! When em0 has an inet address while bridge0 doesn't, it seems to be OK: ----- bs1% uname -a FreeBSD bs1.sp34.ru 7.0-STABLE FreeBSD 7.0-STABLE #0: Sun May 25 20:15:26 MSD 2008 root@bs1.sp34.ru:/usr/obj/usr/src/sys/BSM i386 bs1% ifconfig em0; ifconfig tap0; ifconfig bridge0 em0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500

Hello, My server is experiencing occasional kernel panics when under moderate load. I'm attaching a crash dump and the dmesg output. I'm not sure how to read the kernel backtrace but it looks like the Intel NIC (em0) caused the problem. Occasionally, I used to get a "em0: watchdog timeout -- resetting" error message, but I never had a kernel panic. The problem started last

Hello, I have a server pfsense in bridge mode to function as transparent FW, the problem is that once I connect the pfsense between my router core and my core switch catalyst a few seconds begin to appear several messages like these: em2: watchdog timeout - resetting em2: watchdog timeout - resetting em2: watchdog timeout - resetting em2: watchdog timeout - resetting And the connection falls

Hello all thanks for the open source project!!!! I'm campus network administrator and I try to implement single-sign on with auth backend using mysql database!!! I have searched server that we need that using mysql as auth module for *nix and windows desktop and found : mail server --> qmail + vpopmail+mysql ftp server --> pureftp + mysql proxy server --> squid+mysql domain logon \

Hi, I noticed that network connection of one of my boxes got significantly slow just after upgrading it to 8.0R. The box has an em0 (82547EI) and worked fine with 7.2R. The symptoms are: - A ping to a host on the same LAN takes 990ms RTT, it reduces gradually to around 1ms, and then it returns to around 1s. The rate was about 2ms/ping. - The response is quite slow, but no packet

Hi, I'm afraid about having find a freebsd 5X security issue. We have recently upgraded one gateway from 4.10 to 5.3... Following network used: [ISP]--xl1--[FW01]-----xl0--em0--[SR01] | |--fxp0--em0--[SR02] On fw01, we have one jail. So fw01 is configured as a bridge on xl1,xl0,fxp0. Services works (before and after upgrade). On 4.10, we used

Hi, I have a server at Hetzner and something strange happend. First, I installed FreeBSD 10.0-BETA3 (amd64) via their FreeBSD 9.2-RELEASE rescue system, that's ok. I had to configure the network by using the em driver -> em0 interface. But suddenly, the network was lost. After an ACPI reboot, nothing. Going to the vKVM show me the system didn't detected em0 anymore but an nVidia

I am attempting to join my server to a samba 3.4 domain, and having a few issues. The error it keeps returning is "NT_STATUS_END_OF_FILE" when i attempt to use the net rpc join command. Find my debug output from the command, as well as the serves SMB.conf attached smb.conf # Global parameters [global] workgroup = CHOCOLATE server string = Nemo netbios name = nemo

Hi all, I moved from 8.0-RELEASE to last week's -STABLE: $ uname -v FreeBSD 8.1-STABLE #0: Thu Sep 2 16:38:02 SAST 2010 root@XXXXX:/usr/obj/usr/src/sys/GENERIC and all seems well except my network card is unusable. On boot up: em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0x3040-0x305f mem 0xe3200000-0xe321ffff,0xe3220000-0xe3220fff irq 10 at device 25.0 on pci0 em0: Setup

Updated my Athlon-xp 6-stable system last night, got an em watchdog timeout for the first time a few hours later, during a fairly high-traffic period. System is UP but does have device apic in the config. Any chance this is the recent race condition? Workaround? ifconfig em0 down, ifconfig em0 up seemed to cure it, at least for the moment. Thanks, Barney Wolff -- Barney Wolff I never

I am getting these messages every 30 seconds or so. I searched around and found a few other post about this problem with other devices, but no answers to the problem. I didn't notice any of these message until I upgrade to 4.8-RELEASE the other day. This is a dual processor machine. It happens on all my machines that have em devices, which all happen to be dual processor machines. I