Displaying 20 results from an estimated 1100 matches similar to: "samba3, nfs mounted directory, and dfs"
2006 Nov 30
1
CAPI module issue
Hi List,
I am experiencing an issue in a server that I have installed asterisk;
configured an AVM FRITZ card to work with the capi module.
Once istalled the card works perfect; however every time I reboot the
machine I found that I have to re install the capi4k-utils before I can load
asterisk otherwise the capi module will not loadup.
Can anyone direct me in the right direction in order to
2007 Nov 21
1
Traffic generation and measurement
Hello,
i am searching for a method to generate traffic and measure it, to compare several version of tc configurations.
For my thesis i am researching the best way to use tc for medium sized companies.
For this purpose i analyzed the company network and created a tc schema.
Now i have to test this definition in a kind of simulation outside the network.
Also i have to do a comparison of the
2007 May 15
2
samba and failover (drbd + heartbeat)
Hi,
I've setup two server A + B (debian etch) with drbd + heartbeat in
active/passive mode. If the primary server A fails, the shared
storage is mounted on B, the virtual ip A-vip moves to the new primary
B and samba is started by heartbeat. This works well, but I'm not sure
which samba files should be identical on both server. Both have a
dedicated machine account at the moment.
2008 Mar 03
1
Stepwise Multiple Regression
Dear R,
I am using stepwise multiple glm to select a subset of variables using the step command. My question is how do you calculate the percentage variance for each parameter in the reduced model. An example of my code thus far is,
fit<-glm(Abalone~offset(Area)+Sessile invertebrates+Bare rock+ NCA + Encrusting red algae, family = poisson ())
step(fit)
fit1<-glm(Abalone~offset(Area)+Bare
2007 Oct 18
4
Samba 3 + LDAP with multiple ou's
Hello, all.
I was wondering if anyone could help me with this configuration:
I had a LDAP tree with this structure:
dc=base
+ ou=unit1
+ ou=People
+ ou=Groups
+ ou=Computers
+ ou=unit2
+ ou=People
+ ou=Groups
+ ou=Computers
+ ou=unit3
+ ou=People
+ ou=Groups
+ ou=Computers
...
And I need people from unit1 logging on unit2, unit3, etc.
First thing is to put all users on one
2007 Jul 30
2
SSO across multiple physical subnets
Hi,
I?ve been reading up on SSO-based logins for the last couple of weeks. I?ve
found a lot of information about it, but nothing that matches my situation.
Here?s the gist of my situation...
- I have a Samba 3 PDC in our corporate office as well as three remote
offices.
- Each remote office is in a different physical building and connected to
the Corporate office either via Point-to-Point T-1
2008 May 15
3
Facebooker support for iframe apps
Hi facebooker-ers,
It looks to me like facebooker does not currently support iframe
facebook apps - or am I missing something?
My first problem as I understand it is as follows - When you are
logged into facebook, and access a facebook application,
facebook tacks on a whole lot of extra fb_sig parameters to the
request (including fb_sig_user) that the application can then
validate to
2006 Jul 05
0
Testing again
This is the last one, hopefully.
_________________________________________________________________
Meet Sexy Singles today @ Lavalife - Click here
http://a.ninemsn.com.au/b.aspx?URL=http%3A%2F%2Flavalife9%2Eninemsn%2Ecom%2Eau%2Fclickthru%2Fclickthru%2Eact%3Fid%3Dninemsn%26context%3Dan99%26locale%3Den%5FAU%26a%3D22740&_t=751140432&_r=emailtagline_meetsexy_june&_m=EXT
2005 Dec 30
1
streaming to dialup users gives low quality audio
Hi,
Currently streaming ogg isn't practical in this situation. That was one
of the first things i checked into. WHen i looked i didn't see a streamer
that did both ogg and mp3.
Thanks.
Dave.
----- Original Message -----
From: "Daniel Ballenger" <lpmusix@gmail.com>
To: "Dave" <dmehler26@woh.rr.com>
Cc: <icecast@xiph.org>
Sent: Friday, December
2007 May 28
3
unattended install via nfs
Hello,
Does anyone have a guide for setting up an nfs server for unattended
deployment of centos5? Basically what i want to do is boot a system from CD
media, pass a boot parameter nfs, and ks= options then walk away, the box
goes out to the nfs server, finds the kickstart file, reads, and does it.
I've got several machines and i'd rather not do manual installs.
Thanks.
Dave.
2008 Jan 20
3
centos authentication via ldap produces no name shell prompt
Hello,
I'm trying to set up centos 5.1 to authenticate against an openldap
server. I've got the authentication working, in that i can log in as a user
contained within the ldap database but not in the system passwd/group files.
The problem is instead of a prompt that for example looks like this:
(username)@hostname:~/$
i'm getting this:
(I have no name)@hostname:~/$
2006 Jun 25
4
converting mp3's to aac+ or ogg
Hello,
I've got a FreeBSD 6 machine running icecast2 and ices0streaming four
different streams of mp3's. Now i have a need to stream the same content as
either aac+ or ogg vorbis whichever would be easiest to set up and give the
best quality. I want these new streams to handle both broadband and dialup
users without sacrificing quality. My problem is i really really do not want
to
2007 Aug 28
5
centos5 iptables expert needed
Hello,
I'm setting up a centos5 router for a friend. It will direct traffic to
an internal webserver, already in place, as well as run squid proxy. It
should do nat and have a firewall with iptables. I've set up routers before
for this purpose but always of the bsd type and using their firewalls. I
understand the concepts, nat, packet filtering, etc. but i'm not getting
2005 Dec 30
7
streaming to dialup users gives low quality audio
Hello,
I've got two streams, one for broadband, one for dialup. Well, having
had occation to use a dialup connection recently i checked the dialup
stream. Although it was streaming what the broadband stream was, the audio
quality was audibly worse. It didn't buffer, but it didn't sound as clear as
the broadband stream. I used lame to encode the tracks to mp3 and used it's
2007 Dec 05
1
binary upgrade 5.0 to 5.1?
Hello,
I've googled for this but haven't found an answer. I've got a 5.0 box
that i'd like to take to 5.1. I believe this is possible as i did an upgrade
from 4.x to 5.0 but can't remember what i did. Ideally i'd like to avoid any
downtime.
Thanks.
Dave.
2007 Dec 08
1
yum freezing when removing old kernel
Hello,
Today i ran a yum update and installed kernel 2.6.18.53.1 from
centosplus. I then rebooted to ensure i was running it. I was and went to
remove the previous kernel and kernel-devel packages v2.6.18.53 also from
centosplus. In both cases yum gets to the running transaction check then
hangs, i don't get any errors it just sits there. I have to manually kill
the yum process to
2007 Nov 14
2
yum hangs when installing uucp
Hello,
I've got a CentOS 5 box. I want to install the uucp rpm to give access
to the cu command. I do a yum -y install uucp and yum is hanging on the
transaction test. I get the file downloaded fine, but on transaction test
yum freezes and i have to kill it's pid to stop it. Any ideas?
I'm looking for a program for serial terminals.
Thanks.
Dave.
2007 Nov 20
2
manipulating files and directories with spaces
Hi,
This might be a little O.t. so private responses please.
I've got apache and samba running on a CentOS5 box enabling windows
users to add web content. My issue is i've had to restore some backup data
that was previously archived. The permissions aren't matching up so i'm
wanting to use find and xargs to change them appropriately. Normally i do:
find . -type type
2007 Nov 25
1
CentOS /boot kernel files removed after rpm upgrades
Hello,
I ran a yum update on a centos 5 machine. I then removed some old kernel
files, 2.6.x.14 and 2.6.x.10 older kernels. The issue is i got the error
"Grub can not create template". I checked /boot and it is now empty. If i
reboot this box it certainly will have an issue. I'm running the latest
kernel 2.6.x.15 i believe it is. Can anyone tell me how to fix this?
Thanks.
2007 Sep 03
1
ftape on centos5?
Hello,
Does anyone have the ftape driver working with a centos5 machine,
specifically with a 2.6.18-8.18-8.el5 centosplus kernel? I've got a
situation where it is needed and haven't been able to find anything related
to kernels beyound 2.1 on it, not sure if that's still current, if not i'd
appreciate any suggestions.
Thanks.
Dave.