similar to: VPN and NetBIOS Name Service

I try to setup a PPTP VPN server on Centos 7 and from client a router Vodafone Station (Firmware 5.4.8.1.316.1.21) On c7 I have install this: [root at s-virt tmp]# rpm -q pptpd ppppptpd-1.4.0-2.el7.x86_64ppp-2.4.5- 33.el7.x86_64 and setup all file and firewall like howto say.This now is my config: /etc/pptpd.conf:option /etc/ppp/options.pptpd/etc/pptpd.conf:logwtmp/etc/pptpd.conf:localip

Hi Tom, I nearly completed the test and installation related to http://www.shorewall.net/PPTP.htm. However, there is no serious problem when it is operated as it is in the general companies, but there is Client Program for MS-Window that is operated only by Public IP. So I am very concerned about it. I would like to use Internet through Gateway in (B) as local computers in (A) receive Public

please, help, i have build vpn server (suse 9 + poptop), i have managed to implement tc htb in ip-up script, but every client has own ppp interface (ppp0, ppp1, ppp2...), and my idea is to share available bandwidth, not to limit connection, how to build root tc rule, when I have more then one interface?... please any one width experiance regards _______________________________________________

Hi, I currently connect to my ISP via my adsl modem in bridge mode and PPPoE. I am due to put a second PPPoE ISP onto my firewall box which will give me ppp0 (general) and ppp1 (static leased line). The static leased line will run a number of services on its static IP and it is therefore imperative to make sure rules defined for the static line are assigned to the correct interface. I need this to

Hi, I configured pptp client and it connected successfully. but after sometimes it automatically got disconnected. /var/log/messages : Jul 15 15:29:19 ahc151l pppd[4725]: pppd 2.4.5 started by root, uid 0 Jul 15 15:29:19 ahc151l pppd[4725]: Using interface ppp0 Jul 15 15:29:19 ahc151l pppd[4725]: Connect: ppp0 <--> /dev/pts/2 Jul 15 15:29:19 ahc151l NetworkManager[852]: <info>

I am a newbie to linux and shorewall. I am reading the shoreall quickstart guides. I am a bit confused about the following statement: ----------- quote -------------- The firewall has two network interfaces. Where Internet connectivity is through a cable or DSL "Modem", the External Interface will be the ethernet adapter that is connected to that "Modem" (e.g., eth0) unless you

I am trying shorewall as my previous post With alisias on eth1 loc and 4 pptp client vpns. The odd thing is when I enter one of the vpns in interfaces such as vpn1 it works. But if I enter the vpn in the hosts file shorewall blocks the vpns. shorewall/hosts #ZONE HOST(S) OPTIONS loc eth1:192.168.25.0/24 loctw eth1:192.168.50.0/24 locsa eth1:192.168.75.0/24 vpntw

snat not working my local ip is aaa.aaa.aaa.aaa asterisk sitting on the internet at ip bbb.bbb.bbb.bbb my firewall''s internal ip is 192.168.0.254 i did snat: iptables -t nat -A POSTROUTING -o ppp0 -j SNAT --to aaa.aaa.aaa iptables -t nat -L -v gives: Chain POSTROUTING (policy ACCEPT 23663 packets, 2182K bytes) pkts bytes target prot opt in out source destination 33056

Hi ! Recently i switched my internet provider, to get more speed but another braindead setup regarding public ip addresses. I now have 4 PPTP Tunnel available, of which i''m using one as the gateway ip doing masquerading to other machines in my local lan, excluding three other machines, which i would like to use 1:1 nat to get them a direct access to one of the pptp tunnels. I was

Hello all, I am working on a VPN solution using FC3-2.6.12-1.1381 - openswan 2.4.4-1 - l2tpd 0.69-13 - pppd 2.4.3-5 - samba 3.0.10-1. When attempting a connection from an XP-SP2 box pppd dies without authenticating the user (see below). I have run ntlm_auth from the command line with success. What tools can I use to identify the failure? Is there an obvious error in the ppp options file?

Hi, I''m in a process of setting up a firewall system, which is going to be also an ipsec/l2tp and pptp vpn server for some mobile clients. The problem is, that the system has two ISPs a cable one (no problems here) and a DSL provider. Because of the DSL provider the system is going to have one pppN interface for DSL (net zone) and many pppX interfaces for l2tp/pptp (loc zone)

What I''m doing: I have Shorewall on a SuSE 9.0 machine, which is the firewall/router on the network. External interface is eth0 172.16.1.1, internal interface is eth1 10.40.1.1. (I used the Two-interface Linux System Quickstart Guide). All works well with that configuration. I also use PPPD for dial-in clients, and have two modems for incoming calls. Recently I added VPN interface

hi who can ever help me out with the shaping of torrent traffic? i have a pptp at ppp0 over eth0 (10.0.0.1/8) i would like to shape outgoing traffic of rtorrent on these two interfaces, assume rtorrent is running at port 6999 need 3mbit for ppp0 and 50mbit for eth0 i supposed: [tcclasses] ppp0 1 2mbit 3mbit 1 eth0 2 20mbit 50mbit 2 [tcrules] 1 0.0.0.0/0 0.0.0.0/0 tcp

Hi, I am using Shorewall 2.0.6 on Debian with iptables 1.29. Before I was using Shorewall 2.0.3 and If work correctly, I am not sure that my problems begin after upgrade to 2.0.6, but my problem is that I can''t see some websites on the pc clients ( such as www.microsoft.com ), but some websites yes ( they are not in the pc cache ). My config is Shorewall as gateway/router of

I'm wondering if I'm seeing a regression of 5616 with 3.4.8. I'm trying to set-up pptpd with winbind, which I'm doing on two machines on Debian lenny, and I'm trying on Debian Squeeze now. The Windows client is saying "Error 778: It was not possible to verify the identity of the server." The logs say that everything is ok, and that the client is hanging up the

how to use iproute/iptables to balance by packet OUTBOUND traffic between 2 PPP (pptp cable modem and pppoe adsl modem) links to the same ISP . also by using the fact that the ISP dosen''t filter source IP address - meaning i can use either PPP''s link assigned IP address as the source IP in the ip header.., it works for both devices.., what i want to achive is : when uploading a

Hello! I configured a pptpserver on my firewall and followed the pptp-manual from Shorewall. Login via VPN to firewall (internal ip: 192.168.10.2) is ok and I can ping this server via internal ip (and use it: add samba-shares, etc.). Unfortunately I can''t connect to other hosts in my intranet (LOC). Ping from vpn-client to clients in intranet fails, although Shorewall-Log shows an

Is it possible to have a route stick in the kernel, even if device it points to goes to roller coaster up and down drive. For example. I have an ADSL modem and am doing VPN over it. There's a route needed for VPN added like this: ip route add 192.168.1.0/24 via 1.2.3.4 src 192.168.2.1 There are two problems with it: a) if ADSL link is down when above command is executed, the route

Sorry to post this here, but since last week I've posted to Fedora's mailing list, pptp-devel's list, and linuxgeneral forum. No one has given much for answers, or the people that have replied have not understood what I'm looking for. Hoping someone here can. For the record, I'm doing this on FC3 not CentOS. Anyway, if anyone can provide assistance I would be very appreciative.

Hi! I have printers, files shared to all windoze platforms in my group. Now I want to also access the samba box via a VPN. So configuration: NT----PPTP---NT/RAS-----Linux 7 Any experience with this type of config? Quick test shows the samba host but when I try to access it the network path is not found. Thanks! ++Dirk