similar to: TLS and ldap referals

Hello, I have two ldapservers with Samba PDC and BDC. I started with the PDC i use Suse 9.0 with ldap "out of the box" and Samba 3.0.2a. Everything is working fine with only the PDC running. Now i configured replication. In my slapd.conf file on the master server i added the following lines #permission access to * by dn="cn=repl,dc=felix,dc=local" write # database definition

Hello, I did the steps described below and I have a problem with machine RIDs. When I first join a machine, samba adds to my sambaDomainName ldap entry a sambaNextRid attribute with a value of 1000. Now samba uses this value (incremented each time) to give its RID to the machine. This is going to be a real problem as my current samba computes RDIs as 1000+2*UID. FWIW I'm using

Hi, i'm probably not the first but i have found no concrete information about my problem... lots of information, nothing helped.. :S so, here's the thing.. i'm running a samba-3.0.22-13.16 server on SLES 9 kernel 2.6.16.21-0.8-default as an nt domain controller, there was a migration to Linux for the workstations so i had to implement WINBIND + PAM_MOUNT. after searching for the

Hello, I have a centOS 5.5 box acting as as a PDC with samba 3.4.9 and openldap 2.4.22. Then I joined the domain with a centOS box (samba 3.4.17) which hosts the homes and profiles. I have no problem with XP clients. I can join a windows 7 client to my domain but it is unable to load the profile when logging in. See below a level 2 log.smdb from the file server when I log in with a domain

Hi, I have a setup with two CentOS 5 machines running OpenLDAP 2.3.x, right now the primary uses slurpd to send the updates to the second server, and the second server is using "updatedn" to allow updates (from what I understand! I'm no OpenLDAP guru here.) Clients are using pam_ldap and nss_ldap to get the users and authenticate them in LDAP. Right now hosts query only the primary

With samba 3.0.34 I have the issue described here http://webui.sourcelabs.com/samba/issues/5535 That is "smbpasswd -a joe" gives RID=2*UID+1000 while "net rpc user add joe" gives the value of the sambaNextRid attribute of the sambaDomainName LDAP entry. Also "smbpasswd -am machine" gives RID=2*UID+1000 while directly joining the domain gives RID=sambaNextRid This is

Hi all, I know this is not ldap list, but I'm setting SAMBA LDAP BDC; I think many of you have experience with this. I setup a replica, I haven't done the following I followed 1. http://howto.aphroland.de/HOWTO/LDAP/ReplicationOverSSLConfigureOpenLDAP 2. http://howto.aphroland.de/HOWTO/LDAP/ReplicationOverSSLSlaveServer 3.

Hello, I plan to update my samba-3.0.22/openldap-2.3.24 to samba-3.0.34/openldap-2.4.15 and I'm currently testing it. This is on FreeBSD. My idea is : 1) slapcat the openldap server and save the various tdb files. 2) deinstall samba and openldap and wipe out the bdb files 3) install the newer versions 4) slapadd to the new openldap server This seems to work in my test lab. During my tests I

Dear List, I've a ldap setup with one master and one slave server replication via slurpd and with an "updateref" entry on the slave server, so all modifies on the slave server get an referral to the master server. For some kind of loadbalancing we have a dns roundrobin entry which points as well to the master as to the slave. Unfortunately it seems that the smbldap-tools are not

Is this Samba 3 or Samba 4? If samba 3, which ldap server are you using> What is the mail server? Does the mail server have its own LDAP server included it or is also using an external LDAP server. If you want replication between LDAP servers, they should be the same type of LDAP server (e.g. OpenLDAP or Apache Directory Server or Oracle Directory Server.) If you have one

Hello all, I have setup an HA cluster running under Debian GNU/Linux with samba 3.0.7, openldap 2.0.23 with two machines. Each machine runs winbindd and slapd. One additionally runs slurpd to replicate to the other. Replication works but winbind seems to add entries on the secondary ldap server and not follow the updateref given from the server. This is a problem since the ldap database run

Dear Torsten, dear samba list reader Three days ago I switched our domain from a NT 4 domaincontroller to Samba-OpenLDAP, controlled by a Debian Sarge system. I installed the following inofficial Debian OpenLDAP 2.2 packages (I know these are not supported, but TLS with OpenSSL is essential to us...): Package: slapd Version: 2.2.20-1.hrz.1 Package: libldap2.2 Version: 2.2.20-1.hrz.1

I've been trying to get this to work for a few days now. I read that domain requests are sent via broadcast, and to use WINS to get around it. Well, I've enabled the WINS server on my Samba PDC, and told the BDC's on each VPN segment that the PDC is a WINS server. WINS resolution works apparently, I can sit on a VPN'd network segment and ping machines across the VPN via their

Hi, Our domain is setup with one Primary Domain Controller and two Backup Domain Controllers, and a member server. All domain controllers (PDC and BDCs) are running Gentoo Linux with Samba and LDAP. The member server (fileserver) is a SUNS machine running Solaris. We do everything (add, edit, modify groups and accounts) on the PDC and it will then sync all the changes to the BDC by way of

I'm using samba 3.0.14a + openldap .2.27 on FreeBSD 6.0-RELEASE. I followed the "Linux Samba-OpenLDAP Howto" from IDEALX. My slapd.conf rootdn is cn=ldapmgr,ou=Managers,o=miage My smb.conf ldap admin dn is cn=sambamgr,ou=Managers,o=miage With the ACLs from section 5 (Security considerations) of the Howto when I change a user password from windows XP the userPassword attribute is

Hello I'd like to thank you all for helping my setup of samba3 with Ldap, here are my notes on configuring samba3 openldap on redhat 9. Hopefully this information will help all of you who are trying to preform a similar setup. -=Carl=- this can also be found at: http://www.carlweiss.com/Samba3-redhat9-openldap.html Installing Samba 3 With OpenLDAP on Redhat 9 Commands are listed in

Hi to all! I've set up Zimbra LDAP (2.4) as master, and I want to use RHEL v5 LDAP (2.3) as a slave. This is relevant part of my slapd.conf on LDAP 2.3: # syncrepl directives syncrepl rid=101 provider=ldap://192.168.1.86 bindmethod=simple binddn="uid=zimbra,cn=admins,cn=zimbra" credentials=PASSword searchbase="dc=company,dc=com" schemachecking=on

Hello I have exactly the same trouble as described here: http://www.nabble.com/ldap-passwd-sync-on-3.0.25a-tf4261008.html on samba-3.0.25b-2.fc7. When i set "ldap passwd sync" to "only" and I change password on some ldap samba user, password in attribute userPassword is never changed by samba daemon (to update NT and LM password I use smbk5pwd overlay). If i set pwd sync to

Hello Samba Users, Simo and I have put together a new document which includes the latest replication methods using Openldap. Instead of using the ageing slurpd for replication (which is no longer actively developed or supported); Openldap as of version 2.3 supports a new feature called delta-syncrepl. http://wiki.samba.org/index.php/Replicated_Failover_Domain_Controller_and_fi

Hi guys Im looking to config a BDC server for the high traffic supported inside the primary server. I never configured a BDC server inside ubuntu 9.04 and OpenLdap and Im very lost. Looking for internet I found howtos for PDCs server but not for BDC. Anyone can help me more? Im making a clean install and I don't know how to create same users than PDC for samba and how to make a slave ldap