similar to: Samba Server Specifications

Does this mean that my samba is ready to connect to LDAP server? root at webdev # ./smbd -b |grep LDAP HAVE_LDAP_H HAVE_LDAP HAVE_LDAP_ADD_RESULT_ENTRY HAVE_LDAP_INIT HAVE_LDAP_INITIALIZE HAVE_LDAP_SET_REBIND_PROC HAVE_LIBLDAP LDAP_SET_REBIND_PROC_ARGS root at webdev # Thanks! Paras.

The relevance of this question can be found here: http://aput.net/~jheiss/raid10/ I read the mdadm documents but I could not find a positive answer. I even read the raid10 module source but I didn't find the answer there either. Does someone here know it? Thank you!

> Apart from ipa are there any other good tools out there for centralised user > auth? I am currently testing LDAP (openldap) combined with nss_ldap, configured with authconfig. I would start by testing IPA. Redhat is building out a set of enterprise management tools which include cobbler and spacewalk; I would think IPA will eventually be integrated into their mgt tools. That said, if

Hi, Can someone please assist met with some software RAID 1+0 setup instructions? I have searched the web, but couldn't find any. I found a lot of RAID 10 setup instructions, but it doesn't help me. -- Kind Regards Rudi Ahlers CEO, SoftDux Hosting Web: http://www.SoftDux.com Office: 087 805 9573 Cell: 082 554 7532

I was told recently that Kerberos authentication won't work against a non-windows KDC. Is that accurate? So for instance, it is not possible for Samba running on say RHEL, to authenticate against a Linux server running MIT Kerberos? Additionally, many people said that setting this up was well-documented. Any suggestions of particularly good docs / how-to's?' And lastly, is

On Fri, September 8, 2017 12:56 pm, hw wrote: > Valeri Galtsev wrote: >> >> On Fri, September 8, 2017 9:48 am, hw wrote: >>> m.roth at 5-cent.us wrote: >>>> hw wrote: >>>>> Mark Haney wrote: >>>> <snip> >>>>>> BTRFS isn't going to impact I/O any more significantly than, say, >>>>>> XFS.

My future plan currently looks like this for my VPS hosting solution, so any feedback would be appreciated: Each Node: Dell R210 Intel X3430 Quad Core 8GB RAM Intel PT 1Gbps Server Dual Port NIC using linux "bonding" Small pair of HDDs for OS (Probably in RAID1) Each node will run about 10 - 15 customer guests Storage Server: Some Intel Quad Core Chip 2GB RAM (Maybe more?) LSI

When I call into my Asterisk system, before the call is picked up, I hear a ring tone. What is that tone called & where is stored and configured. I'd like to replace the ring with an announcement that is played until the call is picked up or put into voicemail. TIA

Mine has been working well, but the only problem is that it doesn't support callerid (from the POTS side). > -----Original Message----- > From: John Schmerold [mailto:john@katy.com] > Sent: Tuesday, 5 August 2003 12:37 PM > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] Zhone Zplex 10 units > > Thanks for the Zplex heads up. > > Steven

On 6/18/20 3:47 PM, John Pierce wrote: > On Thu, Jun 18, 2020 at 11:04 AM paride desimone <parided at gmail.com> wrote: > >> The throuble is the radeon driver. I've already tried to install the gui, >> but the system hung on start gui. >> The es1000 is a shit gpu. >> >> > > those are just intended to provide a minimal VGA for initial

John R Pierce wrote: > On 11/2/2017 2:18 PM, m.roth at 5-cent.us wrote: >> We have a fair number of SAS 3.5" drives, and yes, 10k or 15k speeds. > > those are internally 2.5" disks in a 3.5" frame.?? you can't spin a 3.5" > disk much faster than 7200 rpm without it coming apart. > Sorry, that's incorrect. I have, sitting here in front of me, a

Running CentOS 6.3 Areca hardware raid 10 fdisk -l reports multiple partitions with the following description. "Partition # does not end on cylinder boundary." Disks are 512 byte sector size. Raid stripe size is 64K. but if I use fdisk -lc (-c Switch off DOS-compatible mode. ) I don't get any warnings. Should I reinstall? (performance hit?) -- Robert Arkiletian Eric

Hi. I'm looking at deploying a freebsd 7-release server with some storage attached to an areca ARC-1680 controller. But this card is not mentioned in 'man 4 arcmsr' (http://www.freebsd.org/cgi/man.cgi?query=arcmsr&sektion=4&manpath=FreeBSD+7.0-RELEASE). Areaca's website does mention freebsd as a supported OS (http://www.areca.com.tw/products/pcietosas1680series.htm). Has

Hi everyone, I hope you can help me with some performance troubles I've been having. I'm doing some tests with gluster 3.2.0, and I can't understand some of the behavior I'm getting with gluster. The test is using a volume with 12 stripped bricks (each brick is an HD), with no replication, via RDMA. I'm doing random readings of 4GByte files with the FIO tool. Gluster

Hi, I am have compiled samba 3.0.23b (MIT Kerberos 1.5.1) on Solaris 10. I am unable to join the ads domain. net ads testjoin returns the following output... [2006/09/01 17:25:17, 0] libads/kerberos.c:ads_kinit_password(208) kerberos_kinit_password ARTEMISIA$@UNIMELB.EDU.AU failed: Preauthentication failed [2006/09/01 17:25:17, 0] libads/kerberos.c:ads_kinit_password(208)

I am using Jeff Bales' procedure for configuring SAMBA with Active Directory https://thingsdomakesense.wordpress.com/2017/06/06/installing-samba-4-6-5-active-directory-on-centos-7-1611/ When everything is all said & done everything seems to work, but I am not able to configure home directories because the users don't have local Linux accounts - I suspect I need to bind Linux's

Is anyone using SAMBA 3 with DBISAM databases? I've tried what I believe to be every combination of security and file lock settings without success. The program ( ACS - Automated Church Software ) reports numerous errors, of course the only officially supported network is Windows Server. Things worked ok with Samba 2, however SAMBA seems to have broken things. DBISAM is a product of

As the group knows, I'm having compatibility issues with a critical database application. It's been wisely suggested that I monitor the line to see what's up. Problem is: I've never done this before & suspect others like me are not familiar with these techniques. I did find an old LinuxWorld article http://tinyurl.com/yrjurx however I help thinking there is more on the top.

I''m putting together a NexentaOS (b65)-based server that has 4 500 GB drives on it. Currently it has two, set up as a ZFS mirror. I''m able to boot Nexenta from it, and it seems to work ok. But, as I''ve learned, the mirror is not properly redundant, and so I can''t just have a drive fail (when I pull one, the OS ends up hanging, and even if I replace it, I have to

Under Solaris 10 u6 , No matter how I configured my ARECA 1261ML Raid card I got errors on all drives that result from SCSI timeout errors. yoda:~ # tail -f /var/adm/messages Jan 9 11:03:47 yoda.asc.edu scsi: [ID 107833 kern.notice] Requested Block: 239683776 Error Block: 239683776 Jan 9 11:03:47 yoda.asc.edu scsi: [ID 107833 kern.notice] Vendor: Seagate