similar to: different mask for directory inside another share

Le 26 juil. 07 à 13:55, Georgi Alexandrov a écrit : > Vincent Dautremont wrote: > >> Hi, >> here I have another newcomer question :-) >> in the section 9.6.1 of this how too >> http://tldp.org/HOWTO/Adv-Routing-HOWTO/lartc.qdisc.filters.html >> we can read commands about filters : >> ------------------------------------------ >> >> # tc

ehlo list, I''m willing to shape ppp users e.g. each pppX interface to get XXX kbits I classify traffic going to ppp+ interfaces like this: iptables -t mangle -A POSTROUTING -o ppp+ -j CLASSIFY --set-class 0002:0020 then i have a file which is executed when a ppp inteface is up and first argument parsed to that file ($1) is the ppp number (e.g. 35 for ppp35). it generally looks like

Guys After reading through the archives I found some insightful ways to be able to shape traffic to pppoe clients from the server. I have two questions on the topic of setting up a pppoe server however... 1. The clients will all be connected to each other using a normal ethernet network, the segments connected with managed switches. The capacity is roughly 500 nodes. Will these pppoe sessions

Hi, here I have another newcomer question :-) in the section 9.6.1 of this how too http://tldp.org/HOWTO/Adv-Routing-HOWTO/lartc.qdisc.filters.html we can read commands about filters : ------------------------------------------ # tc filter add dev eth0 protocol ip parent 10: prio 1 u32 match \ ip dport 22 0xffff flowid 10:1 # tc filter add dev eth0 protocol ip parent 10: prio 1 u32 match \

Hi, I have a server and ten clients in a Gigabit network. The server has 125mbps network bandwidth. I want that the server has 40Mbps bandwidth reserved for client 1 (IP 192.168.5.141), and the rest bandwidth is for all other clients. My script looks like this (I use IFB for incoming traffic): #!/bin/bash export TC="/sbin/tc" $TC qdisc add dev ifb0 root handle 1: htb default 30

samba SVN 17972, Linux 2.6.16-1.2096 That should be about the same as 2.0.23c getent passwd works to list domain accounts getent group works to list domain groups kinit works for domain accounts wbinfo -u lists domain user accounts wbinfo -g lists domain group accounts In order to access roaming profiles and any shares from 2000 & XP clients, I have to map DOMAIN\username to username in

Hi all, This is my first experience with network file sharing on Linux so I'm looking for debugging advice. Server and client are both running FC5. I've set up my home directory as a share on the server using system-config-samba, everything seems fine. On the client side, as root: # smbclient -L server.domain Password: Domain=[DOMAIN] OS=[Unix] Server=[Samba 3.0.23a-1.fc4.1]

Hello all, I've got a strange problem on the samba servers here at my workingplace. The problem is that we have some files on these machines which seem to be corrupt. Mostly the corrupt files are images, excel cheets and sometimes Word documents. We have no idea why these files become corrupt. We have tested some things: We copied a whole folder to the samba server. The result was

Hello, after an update from Samba 2.2.12 to 3.0.22 and running the daemons 2-3 days my Samba Server freeze the whole Server. First the clients get connection problems, timing out to access the shares and then some minutes later the whole Server freeze, i can't even logon on the console. Only a cold reset is possible. I convert all files from latin-1 to a UTF-8 and then from UTF-8 to ISO-8859-1

All, I upgraded my asterisk setup from CVS on or about 12/15. Suddenly, *all* of my incoming calls are coming up as FAXes. I had to disable my fax extension because every call to my POTS line was getting redirected to my FAX machine. After removing the FAX extension, if I call my POTS line from my cell phone, I get the following: *CLI> -- Starting simple switch on 'Zap/1-1'

Hi, collegues. I have installed Railsinstaller 2.0.0 and have a problem When I''m starting Command Prompt with Ruby and Rails I see the following text "The network path was not found. # Rails Environment Configuration. Your git configuration is incomplete. user.name and user.email are required for properly using git and services such as GitHub ( http://github.com/ ). Please

Hi, A, B and C are three machines. A and C directly access to theInternet while B access to the Internet through A. +-------------------------------------------------------------+ | +-------------+ +-------------+ | | | A | | B | | | | | --- eth0 ---> <--- eth0 --- | | | | | 192.168.0.1

Hi Nikolay, I'd like your input on an issue I'm running into at the moment. I setup a bridge to do multicast querying for some vid. This then does not work for ports that come up later. It works only for those ports that were already up when I set the global vlan options. Debugging through the kernel I can see that the timers are simply never started. Unless I disable and re-enable

First of all, thank you to all of you who have helped to make iptables possible, whether in writing the code for it or testing it. It is BETTER than sliced bread! :-) Anyways, I have two questions related to the use of iptables. 1. I read on a post somewhere that it is smart to put the following two rules at the end of one''s iptables ruleset: iptables -A INPUT -p tcp -i eth0 -j

G'day All, I've been setting up a new set of DCs, using 4.2.3 and all was going well until I tried to get a 4th DC going. I'm using bind_DLZ, and I think this is where I went wrong. I provisioned the new DC before having set up bind properly (I forgot to "yum install bind bind-util bind-libs") before hand. The provision worked okay, except that it told me

Hello everybody I would like to build a bootable CD from my running SuSE 7.3 Kernel 2.4.10. The goal is to have a prebuilt system on CD which would install everything from a compressed image on the same CD, some kind of an emergency or initial setup CD. So I startet with an directory called root_tree, placed the isolinux directory and the binaries there. I copied the initrd from the /boot

Because my debian sarge dist doesn't have eventlogadm i download the source and compile it. I follow the instructions on http://wiki.samba.org/index.php/Event_Logging and insert the line eventlog list = Application, System, Security, SyslogLinux in smb.conf in the main - section. But when i start the command tail -f /var/log/syslog | /usr/sbin/parselog.pl | eventlogadm -d SysLogLinux as

Hi > From syslinux-admin at zytor.com Mon Apr 8 02:11:05 2002 >From: Dermot Bradley <bradley at oldcolo.com> >To: syslinux at zytor.com >cc: erich.titl at think.ch >Subject: [syslinux] Re: Failure with 1st isolinux attempt >Sender: syslinux-admin at zytor.com >X-BeenThere: syslinux at zytor.com >X-Mailman-Version: 2.0.6 >List-Help: <mailto:syslinux-request

Hi H. Peter Anvin wrote the following at 20:55 26.05.2002: >.... >Most BIOSes are highly cantankerous booting off extended-format >floppies. They may not be able to read more than a single sector at a >time, and then have to wait for the floppy to rotate a full turn to read >the next sector. SYSLINUX will fall back on this mode of operation if it >has to. Note that *many*

Hi all, I had met with a question about vhd format when i install xen 4.2.0 source code on suse11_x86_64_sp2. execute steps: 1)Install fully suse 11 sp2 to host pc 2)Boot from Xen kernel menu 3)Download xen 4.2.0 source code from http://xen.org/download/index_4.2.0.html 4)Download bin86-0.16.19.tar.gz cmake-2.8.9.tar.gz Dev86src-0.16.19.tar.gz gettext-0.18.1.1.tar.gz