similar to: add a 5si jetdirect printer to share

Dear list: I have the typical one way audio problem, as far as i know it's a nating problem, my hosts inside my lan can call to outside internet hosts, but can't listen a thing, i read a lot about sip and rtp and protocols and the problem it seems to be with NAT, this is the config i put on my sip.conf file about nat: externhost=sip.server.com.ar > my server name on the

Hi list: First post, hope find a solution.... This is my problem, i've got some chm (Microsoft html help files) and i can't see them from my host clients (windows) i can open them but i cant see them... this is the error log from samba: facu (192.168.0.48) couldn't find service e-books - oreilly & cisco smbd/service.c:make_connection(798) Any ideas? Many thanks.

Hi list: This is my first post and first off all i want to wish a good year for everone! well my problem is; i already installed asterisk on a server and created a channel and a couple of extensions, all seems to work just fine, y can make calls and receive them, i'm using the x-lite client that also works very good, this is the topology of the net (LAN - some clients) --------||

Hi, WOW, this was posted over a year ago! A response now. The problem still exists. As reconfirmed in a post i read not to long ago (within the last 2 weeks?). HP jetdirect cards can only do one thing at a time. (HP has been writing Jetdirect firmware for 5 years, PLEASE HP you _MUST_ have the ability to fix it?! Or don't you??) This can be confirmed if you have an NT only shop. In the

I am trying to set up a jetdirect plotter in our network (samba server running un suse linux 6.2). When I start printing from on of the windows boxes everything seems fine but the printing files only show up in the spooling directories on the samba server. The plotter (HP Designjet 650 C) never receives anything. Here are the relevant parts of my smb.conf and my printcap file: PRINTCAP:

Hello, I have a bunch of Windows XP Pro machines, Samba 2.2.4, and several plotters on Jetdirect cards, and several printers on Netport 10/100 Muli-port network print servers. I have successfully configured Samba 2.2.4 to allow Windows XP to join the domain controlled by Samba and automaticaly create its own computer account on Samba. I would now like to setup Samba to share all the printers

I've set up Samba and LPRng for HP printers with JetDirect cards. It works for one user at a time. But if the printer is off-line or busy, the samba client does not get an error message, but the job gets lost. :( I would like the print jobs to be spooled on Linux even when there is an active print job or when the printer is off-line. Unfortunately I'm not familiar with lpd. The

Any problems serving up this plotter with Samba 2.2.4? I am using RH 7.3, the plotter has a jetdirect card. I am not using samba print drivers, just passing it through raw to 192.168.21.50:raw1. Planning to let windows 98 clients use their own drivers. I couldn't get a job to print (from linux or windows). I ran out of time for today, picking up again on Monday. Any gotcha's I need to

I am having problems with the HP printers that are being handled by a Solaris 2.5.1 machine. The boring details are towards the end. The SAMBA print command I currently use is: print command = echo %u - %s to %p at %T >> /tmp/smb-print.log ; \ lpr -P %p %s ; \ rm %s ; These are EXACTLY the way they are in the smb.conf file. The server will print 99.9% of

All, Hey hey, am new so if this is way basic, flame on. ;-) I have a Dell Poweredge 2300 running RedHat 6.0 and whatever versions of samba and such that are part of that distribution. Samb 'works' from the standpoint of file sharing and printing in a sense. The issue is that the printer is an HP Laserjet 4 connected via an external HP Jetdirect box running IP. The only connection to

Anyone successfully using a HP 8000 DN or HP 5 Lsi (with JetDirect module and assigned IP) with samba? Subject says it all. If you're successfully doing this, what configs made it work? FAQs tell how to set up with a print server, but what if the printer itself is the server? Trust me, the HP doesn't know jack about port 139. Using samba 2.0.4 on Solaris 7 and NT 4.0 SP5 with

Hello. I use Linux 2.0.30(Red Hat) and Samba 1.9.16p. Clients are Win95, NT Workstations and Servers. I use Linux like printserver and bridge. And I have problem with my printer HP LaserJet 4MV with JetDirect card. It print 1 test page( or another 1 page) and print after it second page: User: root Host: LINUX Class: LINUX

I've googled for this and poked around linuxprinting.org, but couldn't find anything helpful. I have a CentOS 5 server with an HP LaserJet 4 attached via JetDirect with the hplip driver. The problem is that when I have multiple print jobs in the queue, there is a delay of about 15 seconds between each job. This gets very annoying when there are 10-15 one-page jobs in the queue.

Hi, The following code, from Angelo Canty article on line "Resampling Methods in R: the boot Package, 2002", works fine for Angelo Canty using R 2.6.0 on Windows XP. It also works for me using R 1.2.1 and S-PLUS 2000 on Windows XP after installing the S-PLUS bootstrap library, with slight differences in my outputs. > library(boot) > library(survival) >

Hello everyone! I 've looking for carriers which can terminate my international calls. They must accept payments from Argentina and give me interconection to my Asterisk. I'd appreciate your help or recomendations. Regards. -- Facundo Ameal. fameal<at>gmail<dot>com Linux User #395088 Share your knowledge, use free software.

Anyone manage to print to an NDPS printer. The Server is NW5 and there is no Bindery context or ques. When trying to print a test page I just get and error saying there was an error. I could print as a JetDirect que, but I can't seem to get it to work. I put in the IP address and can ping it, I just can't print to it. It asks for a Que name but I am not sure what to put in for a

>Date: Sun, 29 Aug 1999 17:30:14 +0200 >From: "Florian v. Behr" <fvbehr@gmx.net> >To: samba@samba.org >Subject: jetdirect printer configuration > >I am trying to set up a jetdirect plotter in our network (samba server >running un suse linux 6.2). >When I start printing from on of the windows boxes everything seems fine >but the printing files only

Dear Asterisk Fans, I'm an Asterisk consultant in Argentina and want to make an spanish wiki (something like voip-info.org). I have the idea and some concepts about this project. It won't be a comercial project, it would be free and it's target would be spanish talking asterisk enthusiasts. I'm wrinting these for the sake of finding contributors, people who want to help me

Hi everybody! I'm from Argentina, so you'll have to sorry me for my English. I have a Linux box with asterisk and want to buy an ATA. Fist, I thought about the Grandstream HandyTone but I read some reviews which says that it has a lot of echo. Some people recommended me Sipura 2000 but I don't know what to do. Now I just to make some tests at home and see what happens and if it works

I have 2 printer queues setup on my samba 3.0.6 NT4-style PDC. About a month ago, one of them stopped working due to an issue with CUPS. After restarting CUPS, printing to that share was giving Access Denied. From a windows box, I was able to add drivers and set default print settings as a domain administrator but I still couldn't print. I created a new printer share pointing at the same