similar to: Any help: samba errro

I have seen a number of people in this newsgroup asking for information regarding asterisk interworking with Vocal. I was able to configure Vocal and Asterisk so that calls originating from vocal can land on an extension in Asterisk. I would like to share this info with the group The scenario that I tested was as follows. A call was originated from extn. 1001 on Vocal and the call was made to

Hi, I am using samba version 2.2.1a.I faced a problem with printer driver uploading when I tried uploading new driver.Windows gives error message "unable to change to the specified driver,original setting will be restored",but the driver files were copied and the corresponding "2" or "3" directory wasn't not created on w32x86. When I searched in the

we have an SUN E450 server with soalris 2.6 and 512mb RAM running samba. we have a network and all the machines are connect through a switch. there are about 40 users who simultaneously use the server running samba for file service. The set up is like this. there is an application on the server which is shared and all the users have mapped their drive letter to that share. this application when

Hi, buddy, I want to create a virtual device attachment to backend. The domain is running, and my code phase is as below: xmlConfiguration = "<devices><sound model='es1370'/></devices>"; virDomainAttachDevice(dom,xmlConfiguration); But the exception "libvir: Domain Config error : XML error: unknown device type " happen when running. Is it

Hi , I use samba version 2.0.2 . It provides an utility called smbsh using which users can use the resources in Windows clients from Unix prompt like local resources . Unfortunately I dont have man pages or any other document as to how to make use of this utility . Any help regarding how to use this utility will be appreciated TIA Cheers -Dorai

hello everyone, we have an SUN E450 server with soalris 2.6 and 512mb RAM running samba. we have a network and all the machines are connect through a switch. there are about 40 users who simultaneously use the server running samba for file service. The set up is like this. there is an application on the server which is shared and all the users have mapped their drive letter to that share. this

Dear All, I seem to have stumbled across an AGI problem; I have written an AGI Script (bottom of this email); The script does the following; Makes a CDR entry when called Records the call Updates the CDR Finds a corresponding DNIS from the SMDR table (captured via a serial port logger) Matches up the record and updates the CDR. The script works perfectly in my test lab and has been doing so

Hello, I have 2 analogue ports on an Alcatel PBX patched to 2 FXO ports on my <mailto:*@home> *@home 2.8 running on top of CentOS. Both FXO Ports are on ONE Digium card. What I would like is: If someone calls extn 281 on my Alcatel PBX it is routed through to Extn 233 on my * thruogh FXO port/module 4 If someone calls extn 282 on my Alcatel PBX it is routed through to Extn 234 on my *

Are there any Snom 200 users that have two extns defined on their phone? I've been trying to get two (or more) extns defined in such a way that when extn #1 rings, LED #1 flashs; extn #2 rings, LED #2 flashes, etc. (Answer greating will be different depending upon which extension is called.) I can get multiple extns to register and work with * just fine, but regardless of which extn is

On 12/25/2014 01:43 PM, Ady wrote: > >> >> >> On 12/25/2014 04:33 AM, H. Peter Anvin wrote: >>> On 12/24/2014 12:16 AM, Robert Yang wrote: >>>> Hello syslinux, >>>> >>>> Merry Christmas! These patches will make extlinux work with umounted >>>> ext2/3/4 filesystem, for example: >>>> >>>> $ extlinux

if i go off hook and dial 666 from an internal sipura spa-x000 (at extn 141), it rings straight through to extn 666. using the same dialplan, from a cisco 7960 with 7.1 sip code (at extn 142), i have to go off hook hit NewCall punch 142 (or any valid extn in the dialplan) hit Dial then dial 666 wtf? sip.conf for crisco [fiji] callerid="crisco" <142>

Hi, In rpcclient/cmd_spoolss.c line 1715 & 1718 struct cmd_set spoolss_commands[] = { { "SPOOLSS" }, . . { "getprintprocdir", cmd_spoolss_getprintprocdir, PIPE_SPOOLSS, "Get print processor directory", "" }, . . { "getprintprocdir", cmd_spoolss_getprintprocdir, PIPE_SPOOLSS, "Get print processor directory",

Here is the current dial plan section: [custom-michael] exten => _900,1,Playback(custom/extn-xfer) exten => _900,2,SayDigits(${EXTEN}) exten => _900,3,MixMonitor........... exten => _900,4,Dial(SIP/${EXTEN}|${DEFRT}) exten => _900,5,Playback(custom/extn-xfer2) exten => _900,6,Goto(custom-michael,901,4) exten => _901,1,Playback(custom/extn-xfer) exten =>

Hello Sir, Could provide the solution for the below error ? chan_read_failed for istate 3 Thanks and regards Chandra Prakash Vela Global Operations - Production Engineering Services Computer Sciences Corporation India Private Limited C-24 ,Sector 58,Noida -201301 USA: 1-302-781-1010 Extn. 1957 UK: +44 (0) 870 850 3512 Extn. 1957 Australia: 1800 137 784 Extn. 1957 India: +91-120-2582323

> > > On 12/25/2014 04:33 AM, H. Peter Anvin wrote: > > On 12/24/2014 12:16 AM, Robert Yang wrote: > >> Hello syslinux, > >> > >> Merry Christmas! These patches will make extlinux work with umounted > >> ext2/3/4 filesystem, for example: > >> > >> $ extlinux -i /dev/sdXN > >> or > >> $ extlinux -i file_block

Hi, Thanks for that information. So, now if I am to include Winbind, I would like to know what other system libraries (Linux based) winbind uses. The deciding factor now would be on how easy or tough it would be to get these libraries running on some thing like VxWorks. As far as I remember, in the 2.2.x series, if Samba was configured with security = DOMAIN, then smbd would connect to the

Hello Team, I am unable to add/upload Windows 7 64 bit print driver from Windows 7 64 bit laptop. It is giving me following error. The folder you specified doesn't contain a compatible software driver for your device. If the folder contains a driver,make sure it is designed to work with Windows for x64-based system. Is there any work around ? Thanks & Regards, Arun Sasi Venmalassery

> Hello syslinux, > > Merry Christmas! These patches will make extlinux work with umounted > ext2/3/4 filesystem, for example: > > $ extlinux -i /dev/sdXN > or > $ extlinux -i file_block > > Also it can work with something like: > $ extlinux /dev/sdXN --reset-adv > or > $ extlinux file_block --reset-adv > Thank you. The 'extlinux' command

> > Hi Ady, > > Thank you very much, I prefer this one, add the extN support to > linux/syslinux-nomtools, create a new "e2fs/syslinux" may make things > more complicated for the user, I will make it as: > > 1) If it is a extN device, then root privilege is not required. > 2) Otherwise work as before. > > Any suggestions is appreciated. > > //

Hi there, Does anyone have Dovecot working correctly with pam_mkhomedir, please? I seem to be going through quite a number of IMAP servers this week, trying to find one that will not only authenticate against a Windows domain but which will also create home directories for users the first time they log in. I'm using winbind to do the authentication & that seems to be doing the trick