similar to: Help needed setting up samba to authenticate against NT PDB

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, How can I check if (i.e.) my provider is requesting me to hide the callerid? I.e. (Telco)E1/PRI---Zap(Asterisk1)IAX---IAX(Asterisk2)SIP---EP Now, if a call comes from the Telco with CLI screening prohobited to Asterisk1, where the call is forwarded using Dial() via IAX to Asterisk2 and then (also using Dial()) on to a SIP endpoint, how do I

Specifics samba-3.0.0beta1-1.i386.rpm on RedHat 9 and smbpasswd authentication, the machine is the PDC and security is set for user. The machine account was setup on the fly and it appears in passwd, shadow, and smbpasswd files as it should. However it seemed to take a very long time to join the domain, about 1-1/2 minutes. I can browse the Samba PDC machine and access the shares, etc. After

No takers thus far. These are the Samba 4.2 changes to which I previously referred (https://www.samba.org/samba/history/samba-4.2.0.html) : For the client side we have the following new options: "require strong key" (yes by default), "reject md5 servers" (no by default). E.g. for Samba 3.0.37 you need "require strong key = no" and for NT4 DCs

Hi Dear Samba Gurus, We're planing to migrate the old samba server to a new samba server. But the person who maintain old samba server have left, so we need to figure out the configuration steps from the old config file. Now the things that confused me now is the setting with "security=domain", the old samba server config global sections are: log level = 3 netbios

Help! I have two computers, both running HP-UX 11.0, both running 3.0 alpha23 (the second computer's samba trees were copied from the first, so they are identical). Mapping a drive from an XP SP1 computer has NO problems on the first HP server. On the second one, it displays the message "Configuration information could not be read from the domain controller, either because the machine

Hi all, I am a samba rookie with a problem. I have replaced an old server with a new server, and copied over the original samba config which was for samba file but the new server has samba 3.0.5 while the old version was 2.0.7. I had problems connecting to samba, so I tried using the supplied default config file and then migrated the original settings to the new file. problems still persisted.

hi Louis, same result: NT_STATUS_LOGON_FAILURE heinz Am Dienstag, 14. April 2015 11:20 CEST, L.P.H. van Belle <belle at bazuin.nl> schrieb: > can you try : > > smbclient //SERVER.DOMAIN.TLD/netlogon -k > > bet that works.. > > Louis > > > >-----Oorspronkelijk bericht----- > >Van: heinz.hoelzl at gvcc.net > >[mailto:samba-bounces

Hello, I'm running redhat 3 enterprise server as. I installed samba during the install, and it's been running for about a week now. I looked in the LogWatch, and noticed this bit: --------------------- samba Begin ------------------------ **Unmatched Entries** auth/auth_domain.c:check_ntdomain_security(289) check_ntdomain_security: could not fetch trust account password for domain

You may have included this in another email however I will ask anyway, did you set DNS to your server in the Linux and Windows clients? Can you check if a Windows Server can join? Can you use DNS management to check the DNS on you samba server? On Mar 28, 2016 2:15 PM, "Dale Schroeder" <dale at briannassaladdressing.com> wrote: > No takers thus far. These are the Samba 4.2

can you try : smbclient //SERVER.DOMAIN.TLD/netlogon -k bet that works.. Louis >-----Oorspronkelijk bericht----- >Van: heinz.hoelzl at gvcc.net >[mailto:samba-bounces at lists.samba.org] Namens Heinz H?lzl >Verzonden: dinsdag 14 april 2015 10:55 >Aan: samba at lists.samba.org >CC: pug at felsing.net; schnaggy at schnaggy.de >Onderwerp: Re: [Samba] samba 4.2 RDP

I have an NT domain on Debian Stretch. It's been upgraded numerous times, but has been running for almost a decade. Since upgrading from 4.1.17 to 4.3.3 (huge Debian jump), then to 4.3.6, clients cannot connect to shares. Prior to upgrading, I found the changes mentioned for 4.2 regarding NT domains and applied them. Even so, I still cannot connect to network shares nor print to

hi, now i did some tests with the "auth methods" option. "auth methods = sam, sam_ignoredomain, unix, winbind, wbc, trustdomain, ntdomain, guest" -> RDP works -> smbclient -k does not work "auth methods = sam, sam_ignoredomain, unix, winbind, wbc, trustdomain, ntdomain, guest, samba4" -> RDP hangs an the welcome-scrren -> smbclient -k works fine

Question: I want to setup a Samba server as a domain member, allowing Windows PC to map unix server directories, but having the authentication performed by our Windows Domain Controller(s). I'm basically following this example from the Samba docs: http://us1.samba.org/samba/docs/man/Samba3-HOWTO/domain-member.html#id2538809 It appears to me that I must "net join" the domain from

I have a Samba 3 server running as my domain controller and want to configure it to authenticate user passwords off a MIT KDC server that is already up and running. I have the KDC client software installed on the Samba box and it will authenticate users using it's tools. I have been looking for some sort of a how-to but I have not found anything that works or explains much very well. Most

At a number of sites we are using Windows 2000 Server SP4 (APPSERVER) as a Terminal Server and a PDC. All user areas are stored on a NetBSD 1.6.2 server with Samba 3.0.7 using security = domain and a named password server. We've joined the domain from the Samba box (domain DOMAINNAME). In general everything works fine, but when a number of clients log on at around the same time (say 25 users

> hi all, > > my working samba-4.1.7 member of a samba3 domain (samba-3.5.3) failed > while updating to samba-4.2.0. Users were no longer able to access > shares because the trust account was broken. > > According to release notes (Winbindd/Netlogon improvements): > > For the client side we have the following new options: > "require strong key" (yes by

Hi Heinz, Baris wrote me the following: > i'm using samba4 and RDP running.... > my configuration: > > smb.conf > > .. > auth methods = sam, winbind, ntdomain, ntdomain:winbind > server services = s3fs, winbind, rpc, nbt, wrepl, cldap, ldap, kdc, drepl, ntp_signd, kcc, dnsupdate > dcerpc endpoint servers = epmapper, wkssvc, rpcecho, samr, netlogon,

I am having two problems with winbind. I don't know if they are related. One problem it that my log.winbindd contains this error and the error occurs every few minutes: [2002/02/25 10:03:08, 0] nsswitch/winbindd_group.c:winbindd_getgrnam_from_group(219) getgrname_from_group(): could not get domain sid for domain "KOK1 Also, my winbindd daemon dies a couple of times per day. I am

Hi, I installed Dovecot on FreeBSD 4-STABLE machine and have a problem. MTA is postfix delivering to ~/Maildir, runs perfectly. Dovecot is configured to use plaintext auth, config file is at the end of this mail. When trying to get mail via IMAP, I'm getting the following errors: /var/log/dovecot.log > Aug 24 12:00:35 Info: Dovecot starting up > Aug 24 12:00:51 Info: Login: goshik

Processing commands for control at bugs.debian.org: > tags 653294 + jessie Bug #653294 [hellanzb] hellanzb: doesn't work with python-twisted 11.1.0-1 (patch included) Added tag(s) jessie. > tags 701439 + jessie Bug #701439 [src:ircd-hybrid] ircd-hybrid: ftbfs with eglibc-2.17 Added tag(s) jessie. > tags 616910 + jessie Bug #616910 [src:musiclibrarian] musiclibrarian: deprecation of