similar to: homedir question

Displaying 20 results from an estimated 9000 matches similar to: "homedir question"

2009 Jun 17
0
Security = share changed in Samba 3+ ?
Hi, I have several servers in separate networks currently running samba 2.2.5. Each server can have aliases and I'm using the %L macro in share path, so that each appear as a separate 'virtual' server - depending on how the client calls it. There is at least one SMB users defined in 'smbpasswd' file. Here is the current config: > [global] > workgroup = MYGROUP
2013 May 13
0
"nis homedir" doesn't work
nis works well: #ypcat -k auto.home user1 server1:/path/& autofs works well: #cd /home/user1 (no problem) compliled with "configure --with-automount": #smbd -b| grep -i automount * WITH_AUTOMOUNT WITH_AUTOMOUNT * Why doesn't samba read ypcat auto.home? see below for additional detail,,,,it's a rebus! Let the best man win! :) maybe
2014 Jan 30
0
Using XEN 4.1 to run Windows 7 DOMU on SERVER1, replicated the HVM to SERVER2 using DRBD. Win7 DOMU doesn't boot in SERVER2 after replication
Hi All, I'm new to XEN and using XEN 4.1 on UBUNTU to run Win7 guest. I've 2 Servers(both UBUNTU 12), where Server1 is configured with full Win7 guest installation on a partition(It works fine). Now as i use DRBD to replicate this partition into Server2 system and try to boot the Win7 DOMU from harddisk, I get below mentioned error - Windows failed to start. A recent hardware or
2005 Nov 02
1
Proper use of SID's and LDAPon dc's?
I have two samba dc's, same subnet, the goal is to have them both be able to answer domain login requests and therefore if one goes down we still have the ability to login to the domain. Can this be done with samba? if so could you just tell me generally the procedure for this? heres what I have right now. server1, openldap master, samba points to loopback for ldap server2, openldap replica,
2005 Nov 02
0
Two DC's + ldap, some general questions
I have two samba dc's, same subnet, the goal is to have them both be able to answer domain login requests and therefore if one goes down we still have the ability to login to the domain. Can this be done with samba? if so could you just tell me generally the procedure for this? heres what I have right now. server1, openldap master, samba points to loopback for ldap server2, openldap replica,
2004 Oct 31
2
samba 3.0.7 and os/2
Hello, samba v3.0.7 on suse linux v9.1 os/2 v4.x I have started the process of replacing our os/2 hosts with linux, starting with the server(s). Most of the problems have been firewall related, a topic only briefly discussed in the docs (nudge). Some of the hosts can now interact with the linux samba shares; not all though. I have run ip traces and have gotten to a point that is a
2013 May 01
1
"nis homedir" issue on samba- 3.6.9-151.el6 (CentOS 6.4 64bit)
maybe there is a bug regarding the use of nis to mount the user's home directory at the login or my misconfiguration. After the CentOS 6.4 (64bit) installation I checked for the latest samba version on the official repository using yum: the latest version (that was already installed) is samba- 3.6.9-151.el6. >From "man smb.conf" I have seen that "nis homedir" is not yet
2017 Mar 22
0
DRS problem after rename
On Wed, 22 Mar 2017 11:29:21 -0300 Edson Tadeu Almeida da Silveira <edson.tadeu at gmail.com> wrote: > Rowland i think that when i was made my changes using that wrong ldb > some problem happened between my DCs. they were working wellm but > now, when i issue this commands, the first one donĀ“t work: > > AT DC2 (server2): > > # samba-tool drs replicate server2 server1
2005 May 13
3
rsync: mkstemp failed: No such file or directory (2)
Hello everyone, Server1: Harmony Server2: Peace I've been using rsync 2.6.4 since some time now, without any problem. I "copy" files from Server2 to Server1 (making Server1 a mirror of Server2). The command line used on Server1 was: rsync -vrlpogt --delete-after Server2::Img/ /LocalImg I was copying files from Server2 (module Img) to Server1 (in /LocalImg). We had a problem
2007 Nov 27
1
Syncing to multiple servers
Helle everyone, Let's say we have 3 servers, 2 of them have the latest (stable) version of rsyncd running (2.6.9) <Server1> ==> I N T E R N E T ==> <Server2 (rsyncd running)> ==> LAN ==> <Server3 (rsyncd running)> Suppose I want to send a big file (bigfile.big) from Server1 to both Server2 and Server3. It would be a good idea to send first from Server1
2008 Nov 06
0
winbind and secondary ADS
Hi, I'm working with two AD servers (I was trying to setup a primary and secondary): From smb.conf: password server = server1, server2 security = ADS This is the scenario I tested and the results: ===> Start: CLDAP is sent to server1. Authentication requests (microsoft-ds) are sent to server1. ===> server1 disconnected: CLDAP is sent to server2. Authentication requests
2014 Jul 25
1
Error after Upgrade
Hello, after upgrade (Debian wheezy) from dovecot 2:2.2.13-1~auto+103 => 2:2.2.13-1~auto+113 I discovered that in my log and all mails stuck in the Queue. I?ve had downgrade v 2:2.2.13-1~auto+103 an everything is fine. What?s wrong? Any ideas or solution greatly appreciated. Thanks. Jul 25 11:03:01 server2 dovecot: lmtp(25638): Fatal: master: service(lmtp): child 25638 killed with signal
2015 Apr 17
2
mailbox deletion is not replicated correctly
On 16.04.2015 20:32, Timo Sirainen wrote: > On 16 Apr 2015, at 19:22, Dennis Kuhn <d.kuhn at heinlein-support.de> wrote: >> >> i can't delete several folders at once. I have a folder structure like >> folder1/folder2/folder3 (we use slash as hierarchy separator). When i >> delete folder1 server1 executes the command correctly >> >> >> Apr 16
2014 Jan 07
0
smbclient inconsistant auth issue
trying to get one server to mount.cifs a share on another and when it failed I used smbclient and it lead me into this oddity and I just can't seem to reason my way through. so you can skim better in case this is too much info: the mystery: why does command #3 work from server1 against itself, but fail for all other clients? server1: samba 3.4.7 (Ubuntu 10.04 server), NT4 domain member
2015 Sep 09
2
automounter with users home directories on centos 7.
Has anyone gotten this to work? Im studing for my rhce and was trying to get this to work and its just not working like it shows in the book im going by. So basically I have two centos 7 servers running under kvm.. One is the nfs server, one is the nfs client.. I have been mounting up other NFS shares on the client and they work fine.. The automounter also seems to mount direct mounts fine as
2007 Oct 05
4
(no subject)
Good day, I've got a question regarding the usage of rsync that I just cannot figure out. I've done a fare hunt for the answer, but I'm stumped. Here is the situation. I have two pc's running linux and using rsync to perform a backup from server1 to server2. For example: rsync -avzr -e 'ssh -i/root/.ssh/id_rsa' --delete /home/samba/admin/software
2009 Apr 07
3
is there a way to do a "push relay"?
perhaps a little difficult to explain - please bear with me. We use 2 icecast servers. server1 is managed by us, server2 by our service provider. Therefore it's easy to make config changes to server1, less easy for server2. I generate a stream using edcast, and send it to both servers. Sometimes I do this by creating 2 streams within edcast, sometimes I just send the stream to server2, and
2024 Jan 06
1
Samba AD - two servers - backup and restore AD procedure
Hi All! I would be grateful for clarification of my doubts about backups and restoration of the AD environment. What is the best strategy for backing up and restoring a Samba AD domain in the following scenarios: * server1 - active directory service (7 FSMO roles) * server2 - active directory service + Samba file server The considered disaster recovery scenarios are: - Corruption of the AD
2017 Jun 01
1
Restore a node in a replicating Gluster setup after data loss
Hi We have a Replica 2 + Arbiter Gluster setup with 3 nodes Server1, Server2 and Server3 where Server3 is the Arbiter node. There are several Gluster volumes ontop of that setup. They all look a bit like this: gluster volume info gv-tier1-vm-01 [...] Number of Bricks: 1 x (2 + 1) = 3 [...] Bricks: Brick1: Server1:/var/data/lv-vm-01 Brick2: Server2:/var/data/lv-vm-01 Brick3:
2015 Apr 16
2
mailbox deletion is not replicated correctly
i can't delete several folders at once. I have a folder structure like folder1/folder2/folder3 (we use slash as hierarchy separator). When i delete folder1 server1 executes the command correctly Apr 16 13:44:28 server1 dovecot: imap(d.kuhn at heinlein-support.de): Mailbox deleted: INBOX/Trash/folder1/folder2/folder3 Apr 16 13:44:28 server1 dovecot: imap(d.kuhn at heinlein-support.de):