Displaying 20 results from an estimated 1000 matches similar to: "Horrendously slow transfer speeds in FC3 is driving me crazy!!! Please help..."
2005 Jun 07
0
Re: Horrendously slow transfer speeds in FC3 is drivi ng mecrazy!!! Please help... - SOLVED!
Does SMB need Push bits acknowledged? I had a similar problem
with sloooow printing on OpenBSD, and had to set the AckOnPush parameter
to enabled. That cured the printing issue for me.
Just a thought...
Jim
> -----Original Message-----
> From: Al [mailto:alsalooq@socal.rr.com]
> Sent: Monday, June 06, 2005 4:44 PM
> To: samba@lists.samba.org
> Subject: [Samba] Re: Horrendously
2005 May 29
0
Horrendously slow transfer speeds in FC3 is drivingmecrazy!!! Please help... - SOLVED!
Thanks for the tip but recompiling the latest version was the second thing I
did after trying and failing to tweak the smb.conf on my original hardware
conf. I found that compiling it for my specific architecture (i686)
increased my performance by 100% (from a punny 0.8 MB/s to a better but
still punny 1.6 MB/s).
-----Original Message-----
From: Diego Julian Remolina
2007 Jun 21
1
x-sendfile horrendously slow?
I''m using Camping (though I suspect this applies to RoR just as well,
and if you have an RoR specific answer I''d be happy to hear it, I may
switch) to do a number of things for an internal application, one of
which is transferring large files (~2GB each) between machines over the
network. I thought the easy route would just be to make an app that
when given the filename, serves
2005 May 04
0
Strangely slow tranfers speeds with samba 3.0.10 and FC3...
Ok, I've found some references to this issue with samba on the net, but not
related to the version of samba I'm running (which is 3.0.10, updated
version that comes with Fedora Core 3).
My problem is this, I've got a Compaq Proliant 2500 (dual Pentium Pro-200MHz
with 256MB RAM and the standard Netintelligent 10/100 network controller
that come with it)... I've narrowed down that
2011 Jul 10
2
bond0 performance issues in 5.6
Hi all,
I've got two gigabit ethernet interfaces bonded in CentOS 5.6. I've
set "miimode=1000" and I've tried "mode=" 0, 4 and 6. I've not been able
to get better than 112MB/sec, which is the same as the non-bonded
interfaces.
My config files are:
===
cat /etc/sysconfig/network-scripts/ifcfg-{eth1,eth2,bond0}
# SN1
HWADDR=00:30:48:fd:26:71
2014 Sep 06
2
Decent Performance
Hi all,
I am trying to get some decent speed out of a vanilla Debian (Proxmox) box and
am running out of ideas. Basically I can exchange data at 110MB/sec (raw, nfs,
ftp) but not with Samba shares.
I tried almost every samba tuning tip I could find to no avail. The only
optimisation left to smb.conf at the moment is debug level = 0. As one can see
the robocopy throughput is merely half of what
2006 Apr 01
1
routing in xen 3.0: icmp gets routed, but tcp/ip only partially
Hello folks,
I have this really strange routing problem that no amount of
googling and experimenting has been able to solve. Then again,
I''m new to Xen and "advanced" networking, so I could be missing
something very basic.
Summary: an unprivileged domU with PCI frontend for a NIC
is used as a router; icmp gets routed, but tcp/ip only
partially. I''m using a
2004 Sep 12
1
using theora
Having built libtheora-1.0alpha3, I tried it out on a 46 second long,
161 MByte raw dv format video clip.
First, I copied these lines from ogg-theora-microhowto.html
<snip>
mplayer -ao pcm -aofile stream.wav -vo null file_to_be_encoded.avi &
mplayer -vo yuv4mpeg -ao null -nosound file_to_be_encoded.avi &
encoder_example -v 1 -a 1 stream.wav stream.yuv > theora_file.ogg
2005 May 27
1
performance on small files transfers
Hi all,
I'm confused of small files (no bigger than 50k )
transfers speed through samba,which is very slow on
my machine. Bellow is a real case,
-- SuSE professional 9.2, kernel 2.6.11,Samba 3.0.14a,reiserfs
-- Dual AMD Opteron,4G mem,Giga byte LAN
-- 2 raid 5 make up of 16 SATA hard disks
-- set readhead to 1024
I tested raids speed using bonnie++ and get 450 Mbytes/s
at 16GB files
2005 Jun 01
4
ntwork problem
I switched my file server's hard disks from a p-2 350 to a p-3
deley 1.1 ghz. I ran kudzu and it detected the new nic and
unconfigured the old one. I may have messed up the static ip
assignment because hte system is not able to do anything on the
network. How do i check the ipaddress asignment and also ensure
the proper linksys LNE-100TX driver is loaded?
thanks.
William
--
Computer
2012 Apr 24
0
read server certificate B: certificate verify failed error is driving people crazy
It seems like there must be a better way of dealing with these errors
in a puppermaster-agent setup.
I currently have one master and one agent that work, running on ubuntu
10.10 (maverick meerkat server).
On another machine, same os and hardware, I try installing with the
same steps and when I run
sudo puppet agent --test --verbose --debug --server <serverhostname>,
it is constantly
2007 Jan 04
0
Problems with Mesa 6.5.2 and open drivers ("driving" me crazy)
OK,
I'm sure this has been mentioned before but I'm really struggling now!
The problem is best described here:
https://bugs.freedesktop.org/show_bug.cgi?id=9456
I've added my own Mandriva cooker bug here:
http://qa.mandriva.com/show_bug.cgi?id=27971
People also make reference to the issue here:
http://forum.go-compiz.org/viewtopic.php?t=309&view=next
Has anyone got any ideas?
2005 Sep 17
1
Re: Something's driving me crazy
thank you Josh and Brian,
I have tried to change the padding and I succeded in getting a same size file ... but still
different :-(
> ... different code paths through the encoder chosen at
> runtime that are optimized for different environments which can
> create different streams
That said, I have to give up, there will be still cases in which I cannot get exactly the same FLAC
file.
2010 Dec 23
2
sendmail / logwatch relaying issue - driving me crazy
Hallo, *<:-)
may be I'm to tired to see the solution, maybe someone can give me a hint?
I do have a couple of servers, sending the daily logwatch report to a
central support email account.
Some servers do have DNS A and CNAME records. On my mailserver relaying
for the servers is allowed.
Only one server drives me crazy, getting user unknown or releaying
denied messages.
Any idea, how
2006 Dec 18
1
zfs/fstyp slows down recognizing pcfs formatted floppies
I''ve noticed that fstyp on a floppy media formatted with "pcfs" now needs somewhere between
30 - 100 seconds to find out that the floppy media is formatted with "pcfs".
E.g. on sparc snv_48, I currently observe this:
% time fstyp /vol/dev/rdiskette0/nomedia
pcfs
0.01u 0.10s 1:38.84 0.1%
zfs''s /usr/lib/fs/zfs/fstyp.so.1 seems to add about 40 seconds to that
2005 Sep 16
3
Something's driving me crazy
I decode and then re-encode a FLAC file someone sent to me, and I get a different file (about 3K
larger).
I have used:
- the same version of FLAC.EXE (hash-checked) used to create the original FLAC file
- the same level of compression
- no tag infos were included in the original FLAC file
I can't really figure out how could it be possible, but sometimes it happens (of course many times I
2008 Feb 23
3
SAMBA is driving me crazy
hi guys
i have CentOS-5.1 with samba-3.0.25b-0.el5.4
and i took this workin well smb.conf from slackware12
( commands to be done befor this ):
# useradd wbc -c /home/wbc -g users# smbpasswd -a wbc# mkdir /export# chmod u+rwx,g+rx,o+rx /export# chown wbc.users /export
the conf file:[global]workgroup = WORKGROUPnetbios name = sanshirosecurity = share
[share]comment = Datapath = /exportforce user
2011 May 26
4
Samba performance
Hi everyone,
I'm trying to use samba in a small video post production house but we are not
getting the performance we expected.
Our setup:
- CenOS 5.6 x86-64
- samba.x86_64 (3.0.33-3.29.el5_6.2 and 3.6.0rc1)
- Intel based server (One 4 core Xeon E5620 @ 2.40GHz, 8 GB RAM)
- 4 Intel Gigagit ethernet NIC ports with 802.3ad bonding connected to a switch
configured tu use 802.3ad
- 8 2TB 7.2
2017 Jul 04
0
Unable to install packages in R: Error in if (any(diff)) { : missing .....
Unable to install packages in R: Error in if (any(diff)) { : missing value
where TRUE/FALSE needed
Sorry for my bad english
I need help in solving the following problem with R
When I try to install a package it end with the following error msg:
Error in if (any(diff)) { : missing value where TRUE/FALSE needed
the enviroment in windows 7 xp1 x64
R-3.4.1 was just installed
R was started with
2012 Jun 05
0
Memory leak during instantiation of a reference class?
Hi,
I have a problem with a large data set wrapped in a reference class. I do that to access the data by reference from within various functions in a script.
# The class definition:
setRefClass("data",
fields = list(h5_df = "list",
training_data = "array",