Displaying 20 results from an estimated 1100 matches similar to: "INTERNAL ERROR"
2011 Sep 01
2
problems with hylafax + iaxmodem + asterisk1.8.5
Hi!
from 2 days I'm trying to run hylafax server and iaxmodem with Asterisk 1.8.5.
I have 2 computers in the lan, one is the Asterisk PBX and the other is the server with hylafax and iaxmodem installed.
In Asterisk I set up an IAX trunk in this way:
___________________________
iax.conf
[iaxmodem]
type=friend
context=outgoing-fax
disallow=all
allow=ulaw
username=iaxmodem
secret=password
2005 Sep 08
3
log files created for both the hostname and the IP address?
At a new account where they run Samba 3.0.14a on a Debian server I'm
seeing log files being created for both the hostname and the IP
address. The log files, however, are not identical. But the timestamps
are close.
None of my installations have this quirk. If the hostname is resolvable
the log is made using it, if not resolvable then the log is made with
the IP address but not both.
Any
2015 May 20
2
reduce delay in fax detection
hello everybody
i want to send fax via asterisk in pass through mode. everything is ok if
enable fax detection in ooh323 and write fax extension in extensions.conf
file. just one problem: delay. i have to wait 5 seconds in order to fax
detection done. it is too long for me when i have voice call and no fax. my
phone rings after five seconds. is there any way to omit or reduce this
time? i test
2010 Feb 06
3
Asterisk 1.4.26.2 died after 80 days uptime
Hi,
my Asterisk on debian lenny died after 80 days.
server kernel: [7572666.186852] asterisk[3673]:
segfault at 10 ip 7f3b8e90b4aa sp 40bf5f00 error 4 in l
ibpthread-2.7.so[7f3b8e903000+16000]
Anything what can be done to find out the reason?
best regards
Thomas
2003 Sep 17
2
Using samba as a PDC with win2k clients
Hello Samba users,
I'm trying to configure my samba server as a PDC for some Win2k
machines.
I'm running Red Hat 8.0 and samba-3.0.0rc4.
Everything seems to be ok, when using workgroup configuration, all the
shares works fine. But I cant get the Win2k clients to log in the
Domain.
It says I have a unknown user or an incorrect password. But at least it
prompted me for a user/password, so I
2015 May 21
1
reduce delay in fax detection
hello and thank you so much for your reply
just one question: how do you use it? AFAIK, when asterisk receive a call,
it select extensions based on the received number and when it detects fax,
jump to the fax extension. now when should i use these show commands to
detect fax and how should i tell asterisk to execute fax extension?
this is a big problem for me, so i really appreciate if you help
2003 Oct 07
3
Client connection to a samba PDC
Hi All,
I have recently configured my linux box as a pdc on my network and
everything seems fine. I can mount shares, enable profile roaming etc...
The problem occurs when I want to change my smb password from a windows
clients. It gives says my domain cannot be found and that it cannot
change the password. What surprises me is that after clicking cancel, it
still logs on to the domain it
2005 Dec 15
1
Perhaps silly question - network browse problems...
Hi folks;
This may not even be Samba related, but I'm stumped, so I thought I'd toss
this one out here.
All the client machines are on 192.168.1.x, all netmasks are configured as
/24, etc.
I cannot browse the network. I CAN connect to a resource on the server just
fine if I specify the full name, but an attempt to bring up the network
browser shows the network name (DENNINGER) but
2002 May 18
2
can't connect from windows
Hello all,
I've setup samba Version 2.2.0a on Slackware 8.0
# uname -a
Linux slackware 2.4.5 #6 Fri Jun 22 01:38:20 PDT 2001 i686 unknown
I start samba as root from a console as:
/usr/sbin/smbd -D -d10 -l /var/adm/smblogs/log -s /etc/samba/smb.conf
/usr/sbin/nmbd -D -d1 -s /etc/samba/smb.conf
In smb.conf I have:
[files]
comment = mystuff
valid users = nigels
path = /usr1
read
2002 May 15
2
Linux server, Win2k client: Almost works, what am I missing?
Hello all.
A couple of days back I posted a question about how I could get a Win2K
client to mount a share from my linux Samba server. I was getting the
familiar "account is not authorized to log in from this station" error
on the Win2K box, despite a set-up that supposedly allowed guest logins
*and* implemented the registry hack for clear-text passwords on the
Win2k box.
While I
2004 Jun 18
1
please help: smbd 100% cpu usage
hi,
i've a problem with samba 3.0.2. there is one windows ME client which used
to work with out any problems. now, as soon as the user connects
(sharelevel: user, or share - i've tried both) on smbd is forked which
causes 90 to 100% cpu load. when i stop samba (smbd/nmbd) this proces does
not die i can only get rid of it whit a kill -9. with this no data can be
transfered from or to
2006 Apr 05
4
fax server functionality on Asterisk
List,
how can I put fax server functionality on Asterisk? * as a reliable fax
server for 500-1000 fax/day (mostly incoming)? Fax server should be like
HylaFax, i.e. stable, low maintenance and functionality like receiving
fax as email with PDF attachment, sending faxes per WHFC.
Faxing with spandsp using bri_stuff (BeroNet/Junghanns quadBRI ISDN
cards) shortens some faxes, or faxes loose lines,
2009 Nov 12
1
Problem with Samba 3.4.3 - previous 3.3.x worked fine
Hi folks;
I have an odd one.
I recently upgraded from 3.3.x to 3.4.3 and suddenly lost both the old
"smbpasswd" file AND the ability to connect to printers from Windows 7
clients.
File server is fine, and everything else is working - I can connect to
printers from XP machines, but not from Windows 7 any more.
I get an "0x00000000d" error from Win7 when I try to connect....
2003 Oct 02
2
join domain failure "system account not in primary...."
I am trying join a w2k bo to a samba DC on RH9. I have read that I need
to add the computer as a user first then join so I did it via these
commands:
adduser myComputer$
smbpasswd -a -m myComputer
Is that all i need to do?
When I join I get the "welcome to the domain message" and then I
restart. However when trying to login I get "This systems computer
account is not in the
2005 Nov 01
3
Samba domains with ldap
Skipped content of type multipart/mixed
2005 Nov 30
1
problem with windows CE 4.2 and samba 3.0.20
Hi!
I replaced a server running RH7.3 and samba 2.2.XX , with a server
runnning centos4.2 and samba 3.0.20 .
We use several iPAQ handheld that connects to a share on the file
server, and then open a file from a network share.
In the old server it worked o.k., but now, the same ipaq machines doesnt
want to connect to the server. they are able to connect to a windows XP
machine, a winnt4 server
2002 Sep 02
2
Printer download - NOT WORKING
Hi,
I played around with samba 2.2.5 and cups and tried
to get it working. Well everything is fine, but the driver upload to the
client WILL NOT WORK.
I used the current stable downloads, latest patch for printing, prebuilds
from Lars Mueller ....
I put together everything.
If one has a working samba//cups please tar it
and place it on our ftp-server.
I don't know what's wrong here
2005 Jun 16
1
smbldap adding machine error
Hi all,
I'm currently working on getting the whole samba with ldap working. I'm
having an error trying to join a computer to the domain, when windows
goes to change to the new domain
I get the dialogue box to enter the user/pass to join I do that and it
returns:
the following error occurred.... the username could not be found.
taking a look at the smbd.log file it shows:
[2005/06/16
2009 Jul 28
1
Updated patch for 8824?
I don't suppose anybody has an updated CalledID patch for Asterisk 1.4.26:
https://issues.asterisk.org/view.php?id=8824
I've been running 1.4.21.1 for a while and have the need to update one
of our Asterisk Conference/Faxserver/switches and wanted to see if the
patch available would apply. It failed in several places. This keeps
me from updating my other installs.
Doug
--
Ben
2004 Dec 22
1
Zaptel/Zapata config from T410p to Brooktrout T1
HI, I'm trying to config a span from port 2 of a DIgium T410p to a Brooktrout TR114-P8V-T1 card. I have a T1-PRI from the TELCO in port 1 (thru first port) working just fine with Asterisk 1.0.3 - been working fine for some time now. No problem with dialplan PSTN calls. Now I'd like to "route" specific DID numbers in thru the TELCO T1-PRI and out thru the second port (span) on