similar to: Wireless DELL M90 with CentOS 5.1

Hello Friends, This is my first post on CentOS mailing list. I am using CentOS since last 3 years and using Linux since 2003. I am Java Based ERP(http://ofbiz.apache.org/) developer and I truly appreciate the stability of CentOS as the Desktop machine for the developers. In the early 2003 I was using CentOS 4 then I moved to CentOS 5 stable release then before 1.5 month I installed CentOS 5.2

Hi, I have a laptop DELL M90 with an Intel PRO/Wireless 3945ABG card. I'm using centOS 5.1 kernel 2.6.18-53 i386. I installed ndiswrapper v 1.52 I installed the driver http://ftp.us.dell.com/network/R164255.EXE The wireless-tools is v 28.2 When I trying to connect to my wireless access point with encryption key disabled everything work fine !!!! When I enabled the encryption key on my

Hi, I received ? Dell laptop M90. The wifi card is not reconized. (Intel 3945ABG) I'm using CentOS 4.4 - kernel 2.6.9 I saw some solutions on the web but I need to change the kernel. http://ipw3945.sourceforge.net/ Is there a solution to make this card working with the same kernel ? Regards. __________________________ Ce message (et toutes ses pi?ces jointes ?ventuelles) est

hello, i am trying to install my wireless card ipw3945 (intel pro wireless abg). i have found the three files ipw3945d, ipw3945-firmware and the ipw3945-kmod from Dags site, but when i tried to install the ipw3945-kmod it says it needs kmod-ipw3945 0.0.73. where can i find it? will this work for my wireless card. i am running Centos 4.3 on a hp dv8000t and this is something i would like to see

This is a new Centos 5.1 install on a HP nc2400 (that use to run XP). Completely clean install; blew away the XP partitions... After applying all the updates, and configuring for the rpmforge repo, I used yumex to install dkms and the dkms-ipw3945, ipw3945-firmware, and ipw3945d rpms. lsmod|grep ipw shows: ipw3945 180391 1 ieeee80211 33417 1 ipw3945 and dmesg)grep

Hi, I have a wireless network but no wired network. I need to access the net for the necessary installation of the wireless drivers in CentOS 5.1. Could anyone let me know how i can go about it!! My card is Intel PRO/Wireless 3945 -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello folks. First of all, sorry for my English :-) I want to build dahdi-2.0.0 rpm from source (i have to use this version, because OpenVox A1200p driver works only with it). I've made some changes in .spec file (added one patch and one source section) and trying to build rpm: rpmbuild --define with-udev -bb SPECS/dahdi-linux.spec Executing(%prep): /bin/sh -e /var/tmp/rpm-tmp.86801 +

Sunday I updated my kernel to 128.1.16 (I had to reboot so it was time to update). No problems with wireless in my home. Monday I started traveling to IEEE 802 plenary, and I have lost my wireless numerous times needing to reboot. The symptom is the radio light goes off. Back before the kernel update, this would happen sometimes at home while on battery, and I would just press the

Fortunately I was starring at the screen during an upgrade and 'caught' the following set of messages. It is hard to remember what I installed fuse for, I think for webdav. My system has a ipw3945 pci card, wireless is working. Here are the messages: Uninstalling: fuse 2.7.4-1.nodist.rf (2.6.18-92.1.17.el5) (i686) -------- Uninstall Beginning -------- Module: fuse Version:

I've visited several web pages, including Dell's, for help in getting the wireless card activated. lspci shows it, but iwconfig doesn't list it. I also visited linux.dell.com and downloaded and installed the 64-bit Fedora 7 RPMs, but couldn't get anywhere. dellwirelessctl also doesn't show up anywhere. I'm running a fully updated kernel/distro. What am I missing?

Hello, I just installed Centos 5.2 on my wife's IBM thinkpad T41 with Atheros wireless. It looks like I need to install madwifi to get the wireless to work. Our home wireless network uses WPA2 I found the EL5 rpms at atrpms, but there is no madwifi-kmdl rpms for kernel 2.6.18-92.1.6.el5. So, to get the wireless working on my home network, what's the shortest path from here? Install

ftp ftp.ietf.org cd rfc prompt mget *index* gets part way through then..... local: rfc-index-latest remote: rfc-index-latest 227 Entering Passive Mode (64,170,98,32,156,203) 150 Opening BINARY mode data connection for rfc-index-latest (4042 bytes). *** glibc detected *** ftp: malloc(): memory corruption: 0x091645d0 *** ======= Backtrace: ========= /lib/libc.so.6[0x3c714c]

I have an Everex laptop (ick, but it was super cheap) that has an Atheros wireless NIC in it, but I can't seem to get it to connect to my wireless in-home LAN. Here's what I've done so far (that isn't working) - any suggestions? [root at marktop mark]# lspci | grep Ether 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c) 05:01.0 Ethernet controller:

Hi, I've got a big problem with a cx88 DVB card. It is passed through to a CentOS 5.3 domU (dom0 is CentOS 5.3 as well), but when I shutdown the domU, this happens: cx88[0]: mpeg risc op code error cx88[0]: mpeg - dma channel status dump cx88[0]: cmds: initial risc: 0xffffffff cx88[0]: cmds: cdt base : 0xffffffff cx88[0]: cmds: cdt size : 0xffffffff cx88[0]: cmds: iq base

Dear collegues! I've got one question about drbd-kmdl packages. As I can see at $ rpm -qp --qf "%{DESCRIPTION}" kmod-drbd-8.0.16-5.el5_3.i686.rpm This package provides the drbd kernel modules built for the Linux kernel 2.6.18-128.4.1.el5 for the i686 family of processors. So, the question is - kmod-drbd is for kernel 128.4.1 (or build for this kernel version), but current kernel is

I took the dive and installed the CentosPlus kernel. I remembered that I could always boot with the old kernel if things went south. But on reboot, kudzu wanted to delete the Atheros config. I told it not to, but.... Would a simple 'freshen' of madwifi-0.9.1-24.el4.at.i386.rpm ? an rpm -qa |grep wifi returns: madwifi-kmdl-2.6.9-34.0.2.EL-0.9.1-24.el4.at madwifi-0.9.1-24.el4.at

Hi Folks, I have to setup a new server with a fritz-pci-ISDN-card inside. For it the fcpci-Packages from atrpm-repo is needed. Trying to install this package on a machine with the newest CentOS5-Plus Kernel I get an error message Missing Dependency: /boot/vmlinuz-2.6.18-8.1.14.el5 is needed by package fcpci-kmdl-2.6.18-8.1.14.el5 Okay -I have a vmlinuz-2.6.18-8.1.14.el5.centos.plus. Any

I get the following error when I try installing fuse-ntfs-3g even though I have installed fuse-2.7 and fuse-kmdl-2.7 error: Failed dependencies: libfuse.so.2 is needed by fuse-ntfs-3g-1.913-1.el5.rf.i386 libfuse.so.2(FUSE_2.2) is needed by fuse-ntfs-3g-1.913-1.el5.rf.i386 libfuse.so.2(FUSE_2.5) is needed by fuse-ntfs-3g-1.913-1.el5.rf.i386 libfuse.so.2(FUSE_2.6) is

hi all, this is my first hit on the mailing list. hope i m posting in the right place. well, i have a dell vostro 1510 laptop with broadcom wifi adapter. n it doesnt work! :( i installed the wifi drivers with ndiswrapper. iwconfig shows the following. [root at laptop ~]# iwconfig lo no wireless extensions. eth0 no wireless extensions. sit0 no wireless extensions. wlan0

I know, I know... don't use the non-standard kernels unless you have to... BUT: I have a D-Link N150 USB card. Bus 001 Device 004: ID 0846:9030 NetGear, Inc. WNA1100 Wireless-N 150 [Atheros AR9271] This isn't supported in C5, but it is supported in newer kernels (ath9k_htc). So let's try NDISwrapper: # rpm -i kmod\-ndiswrapper\-1.56\-1.el5.elrepo.i686.rpm