similar to: No Domain Controller, Please help to interpret tcpdump

I'm trying to get running an ethernet with two machines: a samba server running suse linux 6.4 and a client running windows 98. I follow the steps in the DIAGNOSIS.txt file, but I get stucked when executing 'net view \\SERVER' in the client. I have laready done everything it says in that file: 1) Set a lmhost file in the client. Just with this line: 192.168.0.1 ASTERIX #Asterix is

Hi, first of all, my apologies for the very technical and long nature of this message... I still do not give up with the problem I am having about not being able to browse the Network Neighborhood sometimes. My original post to the list was: >I am using Windows 95 dial-up networking to connect to a Samba box (the >Samba box is a PPP server). I am having problems to browse the Network

Hello all, First, I am new to Samba so maybe I will made some mistakes in my interpretation, so be cool. since an migration from my BDC NOVA (from linux to FreeBSD, which also upgraded Samba), my BDC can't remain BDC more that a couple of days. The network it is in is a class-B heterogene network (both linux and windows). The server is alone on the network and no authentification is

Hello! Following situation: A linux gateway with pptpd is connected via ethernet to a Win2k box. The Win2k server's netbios and DNS name is "server". Issuing a "smbclient //server/share" from the linux box works. I watched the tcpdump output carefully to see what happens. The linux box ("promogate") immediately sends this session request: 18:30:08.988555

hello I would like to join a Netapp fileserver to a Samba domain that uses an external Openldap server for authentication. Here's what I do and where it goes wrong (I've hidden the real ip addresses). I've also created a machine account for the Netapp server on the PDC.: What is the name of the Windows NT 4 domain? [WORKGROUP]: PCKLAS CIFS - Starting SMB protocol... Wed Jul 5

Hello Everyone, I am relatively new to linux and Samba and I am having some difficulties setting Samba up as a Primary Domain Controller. Ihave read the Pdf document called "Using Samba as a PDC" by developrWorks and I have read most of the Howto documents relating to Samba. When I try to connect to my samba server with Win98se I get the message "no Domain server was able to

Dear all, ___Setup: - several wINDOWS 2000 workstations on SP4 (reg-patches applied, they worked on 2.x-stable) - Samba PDC (CVS 3.0.0rc2) (machine accounts added aswell as users in unix & samba) - OpenLDAP (2.1.12) <-- (Not really relevant since I tried without ldap too, so no info about that from this point) - Linux <HOSTNAME> 2.4.19 #1 Fri Jun 13 15:22:09 UTC 2003 i686

Greetings. I try to set up cross subnet browsing but I've encountered some difficulties. Let me introduce my situation 10.1.2.0 10.1.1.0 A_N1 -+ +- A_N1 | | B_N1 -+--[R1]=======[R2]--+- B_N2 . | VPN accross | . . | the Internet | . Z_N1 -+ +- Z_N A_N1 is 10.1.2.4, PDC A_N2 is 10.1.1.1, BDC

Hi, I am currently involved in a project with E-Business 11i.9. For the production enviroment, ct. wants to implement Load Balance and Fail Over - both middle tier and database tier, the last with RAC. As E11i creates lots of tablespaces, the best way seems to be OCFS. We installed & configured OCFS partitions. The next step was to install E11i multi tier, single instance - already

Hello everybody. I could not find an answer to my problem in the archive. (But that may just be me :-) ) I have a problem with proxy arp and connection from loc (localnet) and from the firewall. Works fine from internet to dmz / proxy arp and vise versa. I have a feeling the solution is simple, but I''m no guru in Linux routing etc. The problem seems to be the routing setup. loc -

While using the linux bridge module in 2.6.10, the kernel seems to munge the source IP address of broadcast UDP packets if they come from "0.0.0.1", and sticks on an address of the linux host. I humbly submit that re-writing the source address of packets is not proper behavior for a bridge, even if those source addresses are not traditionally valid. Sure, 0.0.0.1 isn't a valid

Hello, I am running Shorewall 2.0.2f, on SuSE 9.2 distro, kernel 2.6.8-24.11-default My ip addr show output is as follows: 1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 brd 127.255.255.255 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0:

Hi, I would like to know if somebody can point me out how to configure several DomUs in a private LAN (for example 192.168.100.0/24) and one DomU with two interfaces (one - 192.168.100.0/24 and two - internet). So far I have enabled in xend-config.sxp: (network-script network-route) (vif-script vif-route) My config files have: /mnt/VM/1.cfg:vif = [''ip=192.168.1.3'']

Hi, Please, could anyone clarify if the available RPMs on the OSS site, related to TAR and fileutils, were implemented by Oracle or by Red Hat ? If they were implemented by Oracle, are they certified/supported by Red Hat ? I am asking this, because my fileutils version appears to be higher than the recommended one, but still the DIRECT option is not available. I am on Red Hat AS 2.1

Hello! Scenario: kernel 2.6.22.9, SysKonnect SK-9E21D, vlan, redirecting for packets arriving on than vlan to ifb. Using tcpdump on ifb iinterface I see the following: 03:30:17.322484 5a:71:6f:15:00:17 > 00:00:5a:71:00:00, ethertype Unknown (0xcb69), length 1522: 0x0000: 2000 0800 4500 05dc 3a2f 4000 3c06 d868 ....E...:/@.<..h 0x0010: c299 9143 c3e6 0ec1 0050 0f2a

Hi Lars, I have no experience to use tcpdump, here is the output from TCPdump for your reference. Any idea? Use my home PC to ping company PC 01:00:25.154706 ethertype IPv4, IP 192.168.1.2 > 10.0.0.2: ICMP echo request, id 1, seq 17, length 40 01:00:25.154706 IP 192.168.1.2 > 10.0.0.2: ICMP echo request, id 1, seq 17, length 40 01:00:25.154706 IP 192.168.1.2 > 10.0.0.2: ICMP echo

Add a new constant ETH_P_802_3_MIN, the minimum ethernet type for an 802.3 frame. Frames with a lower value in the ethernet type field are Ethernet II. Also update all the users of this value that David Miller and I could find to use the new constant. Also correct a bug in util.c. The comparison with ETH_P_802_3_MIN should be >= not >. As suggested by Jesse Gross. Compile tested only.

----- Original Message ---- > From: Pyun YongHyeon <pyunyh@gmail.com> > To: Ian FREISLICH <ianf@clue.co.za> > Cc: FreeBSD Current <freebsd-current@freebsd.org>; Robert Backhaus <robbak@robbak.com> > Sent: Monday, March 17, 2008 8:12:03 AM > Subject: Re: Packet corruption in re0 > > On Fri, Feb 22, 2008 at 10:43:22AM +0200, Ian FREISLICH wrote: >

Hi all, I''m running Xen-3.2 and linux-image-2.6.18 as Dom0 kernel on a VT-x processor. The problem is that broadcast arp who-has packets are not seen in Dom0 kernel. I''ve tried both precompiled debian kernel and compiled latest one from sources as described at http://lists.xensource.com/archives/html/xen-users/2008-01/msg00699.html There is no linux bridge invoked,

Hi, I hit the issue described in this thread https://groups.google.com/forum/#!topic/linux.samba/VfjW9Af92Wg while testing out s4u2self and s4u2proxy in a windows service, so I wanted to share my setup. So I wrote a small windows service that's running as a local system account to impersonate an user via s4u2self (using LsaLogonUser in win32 api than calling ImpersonateLoggedOnUser) and then