similar to: Browsing problem with duplicate domains

Hi, I am trying to get an xp machine to join a samba 3.0 pdc domain. I keep getting the following error below. I can view the pdc shares with no problem. Can anyone point me in the correct direction on getting this fixed. Any help would be greatly appreciated. The domain name homenet might be a NetBIOS domain name. If this is the case, verify that the domain name is properly registered with

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, i recently upgraded some of my servers from 3.0.2a to 3.0.4 after the upgrade my browselist shows duplicate entries for the domains. one domains is managed by a samba PDC(providing WINS too) and two samba BDC's. the other domains are managed by one samba PDC. 'smbclient -N -L <WINS_SERVER>' shows: - --- Workgroup

Here is the packet trace - ICMP seems to be coming from my SAMBA Server - see frame 3 Does the netstat output look correct in my first request for help? Joel Morrow jiram@aol.com TRACE Frame 1 (92 on wire, 92 captured) Arrival Time: Dec 22, 2001 09:36:08.333676000 Time delta from previous packet: 1.999444000 seconds Time relative to first packet: 2.000088000 seconds Frame

Using rpms and converted dovecot.conf with doveconf. Need assistance to determine how to resolve 'auth-worker' and userdb complaint. logging into mysql from commandline with mail admin acct and using dovecot sql query is successful but the following fails: doveadm auth -x service=imap -x lip=127.0.0.1 john Password: passdb: john auth failed extra fields: temp doveadm(root): Fatal:

I'm facing a problem with dovecot/deliver and SSL in 2.0.4 which did not occur in earlier releases: I get this error message: postfix/local[18259]: 687CE86514: to=<rainer at homenet.local>, relay=local, delay=0.08, delays=0.02/0/0/0.06, dsn=5.3.0, status=bounced (Command died with status 89: "/usr/libexe c/dovecot/deliver". Command output: doveconf: Fatal: Error in

Hi list, I'm trying to set up a samba server and have run into a problem: Whenever I try to access a share other than /home/<user> I get a message saying that this resource is nonexistant on the server... I have problems getting "net groupmap modify" work, the commands I'm using is: net groupmap modify ntgroup="Domain Admins" unixgroup=root net groupmap modify

windows systems and I can see the SAMBA server in my workgroup inside the network neighborhood. When I double click on the server nothing happens for about 5 seconds and then I get a pop up error (text of error is): -------- \\Sambaserver is not accessible Windows cannot find the computer or share name. Make sure the computer or share name is valid and that you are connected to the network,

Hi, I have a strange problem with some folders shared by Samba. In my home directory (share by samba) I have these files with this permissions (only samples, it also happens with folders): -rw-r----- 1 mark Domain Users 0 2010-11-24 14:30 a -rw------- 1 mark Domain Users 0 2010-11-24 14:30 b When I connect to USER Share (home) from any host (Windows or Samba/Linux) as the correct user: Samba

ok i gave up. can sb point me docs on how design proper qos rules ? about differences between them and the usage (which for wifi, which for ISPs which for homenet) ill read and do it -- *Dariusz ''tdi'' Dwornikowski | Gentoo | admin at pozman.pl | *[JID]:tdi@gentoo.pl|[gg]:2266034|[IRC]:#gentoo-pl@freenode | *[MAIL]:tdi@pozman.pl|[WWW]:www.tdi.pozman.pl |

Sambaserver is not accessible I have a problem connecting to SAMBA from Windows/ME systems (using samba--2.2.2 on Red hat Linux 7.1) What I would like to know is - What can I change to get this to work properly? SETUP I have a simple network - three Windows/ME systems and 1 Red Hat Linux 7.1 system all on the same subnet. There is a linksys router on the same subnet that provides WAN

I get a problem of setup samba connection with a Windows 98 My Linux box has RH8.0 on it and is networked with a Windows 98 PC What I have done: (1) Follow the instructions on "The Official Red Hat Linux Customization Guide" and config smb.conf (2) Run the test in DIAGNOSIS.txt, failed in step 5. (3) Step 7 is OK, which means local smb client can connect to smbd service and

Hi; I can't seem to find anything in the docs that quite matches this, but if there is a doc, just point me to it. The situation is this. I have samba running on my home net. It's running as a standalone server in user mode so that users on computers at home can have home directories and and access to the printer. When I bring my laptop home from work, I occasionarlly need to print

I have recently installed 3.0.10-1.fc3 on a FC 3 server. I am trying to set up a small homenet work with a windows box and a linux/winXP laptop. The network is on a wireless router (though the windows box and server are wired). I seemed to have everything working and was able to mount drives of any of the computers on both of my FC 3 computers. I was also able to map shares onto the windows

Hi, I've tried a couple of different versions/distros and can't seem to mount a FAT32 (vfat) partition and then share it with Samba, such that all use of R/A/S/H attributes (for files and folder) is maintained... So I'm wondering if this is even possible? I've most recently been testing with host: Debian 4.0 (Linux 2.6.18-4-686) which includes Samba 3.0.24 client: WinXP

Hello, I'm trying to get priting working from a Windows XP box to a printer that's been shared via SAMBA. I can browse the printer fine, and can print fine from linux, but not from Windows. The following errors appear in the SAMBA log for the windows host I'm printing from: lp: unable to print file: client-error-not-found lpstat: Unknown destination "level3-bw"! The

Hi, I tried your suggestion (I assume the "server" = hostname, because there is no server name defined in smb.conf), still can see the problem. This time, I even could not see my linux box from Network Neighbor ?? (This happened before, I was not always be able to see it. Windows seems to update its cache each 10 minits which will erase any unaccessable computer names, that may

I get the same problem and have struggled on this for 4 days. My Linux box has RH8.0 on it and is networked with a Windows 98 PC What I have done: (1) Follow the instructions on "The Official Red Hat Linux Customization Guide" and config smb.conf (2) Run the test in DIAGNOSIS.txt, failed in step 5. (3) Step 7 is OK, which means local smb client can connect to smbd service and

Hi, I have been trying to use samba for a while as a way to have an identical desktop/startmenu/profile/favourites/etc on multiple PCs. Samba is setup as the PDC and I can join the domain and login. The problems started firstly when I wanted to have some sort of caching and also logon concurrently to different pcs with the same user. The main problem being that whichever computer I log off

[cross-posted from www.tek-tips.com] Dear samba forum, I've now wasted most of a weekend on this issue, so now it's time to swallow my pride and ask for help! Background: My main home computer died. I can't afford to replace it right now, so I'm attempting to retread an old AMD PC into a linux print/file server. Clients are a mixed bag of Windows XP home/professional PCs. The

Hi, I installed Samba on Solaris to enable me print from the solaris workstation to a windows print server. When I start smbd and nmbd , smbd does not run but nmbd runs