similar to: SMB3.0 with XP Home and Win98SE clients. XP no go, what should I do?

I have been having an irritating problem with my home network. My network consists of 1 PC running Mandrake 8.0 as the file server with Samba 2.0.7, three PCs running Win98SE and one PC running Win XP. I have had the network running for almost two years in various OS configurations and for the most part have had smooth operations. However, my problem comes when I try and copy, move, or save any

Thanks for the answers so far but I haven't been able to come up with an solution yet :( Some new info (see bottom of email for history): 1. I upgraded to 2.0.10 on my Mandrake 8.0, no change to the transfer problem. 2. I attempted to ftp a file from the Win 98SE PC to my Samba Server, didn't work. So I can assume that it is not specifically Samba problem. 3. I have changed the NIC cards

Hello, Can I run Win98SE in Wine? I've an old game I'd like to run once more that *only* works with DirectX 6.0b and no other. Stupid, right? Wine is my last hope in playing that game... Thanks! -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.winehq.org/pipermail/wine-users/attachments/20051025/bd4ec6a5/attachment.htm

I have 7 wokstations, I would like to use my mandrake server to mirror bosses workstation(it is RedHat9.0) onto separate hard drive on the server, so if something happens to her system, I could just take out that hard drive and replace the crashed one and limit my recovery time to 30 minutes at most. Is complete backup nightly the right solution? How would I go about it? Also, I would like to

Hello, I tried the v1.0 test of dovecot, because it should make the directories for me. I configured it and installed it. The old one is still there, but I shut it down to test the other version. When I start the new v1.0 test of dovecot i get the following message in my log: Jun 6 13:33:08 APOLLO dovecot: Dovecot v1.0-test72 starting up Jun 6 13:33:09 APOLLO dovecot: Auth process died too

Hi, I've been struggling with this problem for the last couple of hours and am nowhere near solving the problem. I am trying to run a tftp server in a chroot jail. Now perhaps I am being paranoid, but I would like to have it launched from within its own jail even if it supposedly does a chroot itself and runs with a parameterizable user. I downloaded the atftp-server package and tried

As per request by Arnaud in the users list Device manufacturer: Apollo Device name: 1085VC (Retailer's product page: http://shop.esquire.co.za/ProductDescription.aspx?id=583072) upsc on mains power: > $ upsc apollo > battery.voltage: 13.50 > battery.voltage.nominal: 12.0 > beeper.status: enabled > device.mfr: > device.model: > device.type: ups > driver.name:

Hi, I'm trying to setup a Linux CD on mashine that will have nothing but a CDROM. Everything worked fine until I removed the HDD. From this moment on the CD doesn;t boot. I upgraded to Syslinux 2.0 but with no luck. The error message I got almost says it all: "Extremely broken BIOS", but can I ask for help if there some ideas how to fix this, cause if I put the HDD back the CD boots

On 02/27/2010 10:31 PM, swdamle at bsnl.in wrote: > Hello, > This has reference to ""Dos installer" from Win98se in Syslinux-3.84. > > Sorry to say the problem CONTINUES with Syslinux-3.85. Following is > for your reference please. > You may want to try: http://www.zytor.com/~hpa/syslinux/syslinux.com ... which is compiled with debugging information turned

Hi Having followed this guide: http://blog.shadypixel.com/monitoring-a-ups-with-nut-on-debian-or-ubuntu-linux/and seeing support for Apollo UPSes mentioned on the compatibility list (genericups, type=4) I tried to set up Nut as follows. OS: Ubuntu Server 12.04 Nut: 2.6.3 (I believe - from Ubuntu repos) ups.conf: > [apollo] > driver = genericups > upstype = 4 > port = /dev/ttyUSB0

Well the weekend didn't bring any solutions to this unhappy camper. I spent most of my time trying to narrow down the problem again. I started out by installing a quick copy of ZipSlack on the Win98SE machine to determine once and for all if the problem was a Windows problem or not. Well, I tried a simple FTP from the ZipSlack to my Mandrake 8.0 server and it hung up like in Windows. So I

Hi, I've got an odd situation here. Somehow, I find myself with two files that start with the - character. [eric at apollo mysql]$ ls -l total 93348 -rw-r--r-- 1 mysql mysql 9273344 Nov 13 19:03 -N=2007-11-08 -rw-r--r-- 1 mysql mysql 38879232 Nov 13 19:02 --newer=2007-11-08 Don't ask how they were created; something went wrong with a script at some point. My problem is that I am

Well as a further to my last, I broke down and put a copy of Win98SE on a spare HDD in my Mandrake server box. First moment it was up and running, I tried to transfer the files between the two problem computers and BINGO! It worked. So sadly I must assume that the problem must lie on my Linux server :( As I have previously tried both Mandrake 8.0 and Redhat 7.1 and end up with the same transfer

Hi Everyone, My doubts are for Samba4.1 performance related enhancements (SMB2.1 / SMB3.0). My experimental samba server hardware is running 4.1 version. Want to improve robocopy WRITE throughput from a two samba client machines (win7 or win8 or server2012 x86 servers). Someone please advice me how can I use SMB2.1 or SMB3.0 capabilities to improve WRITE throughput. I tried samba4.1

Hi All: I am an newcomer,I have a question that the lastest version of samba can suport the SMB3.0 ? Can suport SMB3.0's persistent File Handles feature? I am test the SMB3.0 Transparent Failover in winserver 2012. Docs says that Failover need client and server all surport SMB3.0. Can I user samba instead of SMB server? Thanks Jiademing

Hello, When I run the 'smbclient -L apollo' command at the UNIX prompt a I get an error. I have gone as far as I can in this DIAGNOSIS.txt file. Does anyone have any thoughts on what may be causing my problem ? I have made my comments to the DIAGNOSIS.txt file via '---- davidw {comment}' so you can see what I've done to date. Also, I thought I'd pass on the output

https://bugs.freedesktop.org/show_bug.cgi?id=63101 Priority: medium Bug ID: 63101 Assignee: nouveau at lists.freedesktop.org Summary: [Ubuntu 10.04.4 LTS 32-bit] NVIDIA GeForce 7300 GT AGP graphics card will not display any text characters on VIA Technologies Apollo MVP3-based mainboard QA Contact:

I need a client for Solaris 10 u11 that will allow me to mount encrypted shares located on a EMC VNXe3200 Thank you for your time ! Charles Corpany Charles.Corpany at ngc.com<mailto:Charles.Corpany at ngc.com> Information Systems Sector, Civil Division - VITA Program Northrop Grumman Corporation Virginia Department of Health Datacenter James Madison Bld, Upper Basement, UB20E 109

Hello, I have a question about running R in a cluster environment. The shell script I am running looks like this: #!/bin/bash cd /nfs/apollo/2/c2b2/users/mb0001/Data /nfs/apollo/1/shares/software/core_facility/local/x86_64_rocks/R/current/bin/ R --save < calculate.R >& script.out I have used the "-save" command to save the R workspace (If, I understand it

On Sun, May 29, 2011 at 5:13 PM, Arjun Singri <arjunsingri at gmail.com> wrote: > Oh ok. Here it is: >  #!/apollo/env/envImprovement/bin/perl Okay, now what's the output of "/apollo/env/envImprovement/bin/perl --version"? -Eli > On Sun, May 29, 2011 at 5:07 PM, Eli Friedman <eli.friedman at gmail.com> > wrote: >> >> On Sun, May 29, 2011 at 5:05