similar to: changing password with a windows client

I have been having some problems setting up tinc on 2 masquerading linux slackware boxes. routerA is a NAT router to the internet, for two networks on two interfaces. This are the two networks: eth1 Link encap:Ethernet HWaddr 00:E0:4C:6C:6D:86 inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX

Hi all, I'm trying to access a NT machine through the Internet. First I used an win95 as a client, but since I couldn't get it to work, I used a Linux machine (kernel 2.0.29) with Samba 1.9.18p7 to get some feedback. I did the following: linux01/usr/local/samba/bin> ./smbclient -L ntserver -I a.b.c.d Added interface ip=<myip> bcast=<broadcast> nmask=<netmask>

Hi, My local server is running CentOS 7. The machine has two NICs and is acting as a gateway. For DHCP and DNS, I'm using Dnsmasq. I have a strange little problem with local hostname resolution. Before going into more details, here's my configuration. [root at nestor:~] # ifconfig enp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.0.2 netmask

Hi, I was wondering if anyone had a good dhcpd.conf and /tftpboot files for a EPIA-M motherboard with RedHat 9.0.... Or maybe just a configuration that works with the EPIA-M (doesn't matter which type of linux). I'm trying to boot the system from the network and it seems to be getting to downloading pxelinux.0 but then nothing happens after that.... I'm using ISC dhcpd V3.0pl2,

I would like to know how to view a samba server on a different subnet than the client workstation resides. For example, I have a Samba 1.9.18p3 server in subnet 'a' and a NT 4.0 client in subnet 'b'. The Samba server does not show up when the NT client double-clicks on the Network Neighborhood. However, if the client does a Find:computer it will find the server, and shares can be

Many thanks for the help to date. I now have a working vpn with three nodes: 10.20.30.1 10.20.40.1 10.20.50.1 Each machine can see each other machine 100's of miles apart from each other. Each machine is behind its own router. The machines are on their own subnets, as well, of course. The individual IP's on the lans of the nodes are: 192.168.0.155 (corresponds to 10.20.30.1)

Hi, After lots of struggle and rtfm I finally got most things running, except for 'nmblookup' and 'net getlocalsid' on the BDC. I'm not new to Samba, but plenty more to learn. Here's the setup in summary: system pdc is the PDC on subnet 192.168.0.0, running SuSE10.1, LDAP master, wins server, domain master browser, no iptables; system bdc is the BDC on subnet 192.168.2.0,

Hi I got a FC4 system running as Host.  Within this I loaded Suse 10 as a guest OS, the config file is as below: kernel = "/boot/vmlinuz-2.6.11.12-xenU" memory = 100 name = "suseguest" nics = 1 vif= [''mac=aa:00:10:00:00:10, bridge=xen-br0''] ip = "192.168.2.2" disk = [''file:/dev/hdc3,hdc3,w''] root = "/dev/hdc3 rw" extra =

Hi all, I have succesfully joined together three LANs using OpenVPN over Linux (Debian) gateways at the 'exit' of each one of these LANs. The VPN seems to be OK, as I can ping network hosts from one LAN to another using their private IP addresses with no problem at all. However network browsing through the VPN is not working. The network diagram for my setup is at

I have just migrated to a new server and have Samba ver 3.0.12-5-SuSe running on a small network ( 7 win 98pcs) Logins are possible from all clients but morning logins (after client reboot) are delayed. It can take 2 or 3 attempts to successfully login. At each failed attempt the hour glass sits there for 30 seconds or so. logins usually succeed on the second or third attempt. I have searched

Dear sir or madam, i've got a problem connecting a Linux machine with a Windows Me internet and file share. This problem i didn't got it with SuSE 7.2. From SuSE told me that have been some changes on SAMBA from 7.2 to 7.3. I'd like to ask you if some one could help me. I am looking forward for your anwser. Yours faithfuly, Bill Giannakopoulos P.S. I can see the Win PCs but i

Hi , I am using Mandrake 7.2 and trying to install samba to share my linux hard disk with Windows 98 ... Herewith my config and diagonstics : bigserver <------------> aclient runing : mandrake 7.2 Win98 Ip Addr.: 192.168.0.1 192.168.0.2 password encrypted activated activated - ping commands work fine on both ways, so my Tcp/ip

Hi All, I'm having a problem with cross subnet browsing and name resolution across an openvpn tunnel. i've found quite a few people who've had the same on mail lists but none of their fixes have worked. The spec of the setups at both ends of the tunnel are as follows: OS - CentOS 5.5 Samba Version 3.5.4 OpenVPN Version 2.0.9-1 Each server is configured in gateway mode with two NICS,

Hello, samba In my net (with samba installed) all works well, but I want windows users to authenthicate in my samba server. And I have tried a lot of things, without result. If anybody using it could send me his (or her) smb.conf file, I would be pleased. Thanks angel

Hello, I''m trying to configure my desktop as a bluetooth network access point for my ipaq (as explained in http://www.stolk.org/debian/bluetooth.html). I''m running shorewall version 2.2.1 on debian testing with a local network via eth0 and internet access via eth1. I''ve created a bridge br0 for eth0 and bnep0 and activated bridging in shorewall. dhcpd is listening

Starting a new Xen setup, with off-the-shelf Wheezy, and the standard Xen packages, which turn out to be Xen 4.1 I used to just put a (network-script network-bridge) in the Xen setup, but I guess you can''t do that anymore... There are a variety of recipes to setup the network and bridging, since apparently the Xen setup doesn''t does this for you anymore. I''ve gone

I have literally beat my brains out trying to get my XP machine to talk to my samba server on my linux machine. MY PROBLEM: The samba server (version 2.2.7a) is running on Redhat Linux 9.0. I can successfully connect to the XP machine and copy files from the XP machine to my Linux machine. But I cannot access my linux box from my XP machine (The samba server shows up in the browse list on

Hi All, I am trying to setup the site-to-site VPN with TINC for connect my home network to company network. Here is the IP allocation and configuration for your reference. Home PC (192.168.1.2) ?-----? Home (OPENWRT Router, 192.168.1.1, 10.0.0.1) ?----------------? INTERNET ?-------------? COMPANY (Windows 7 PC,192.168.2.1, 10.0.0.2) ?------------? COMPANY (SERVER ZONE) ?----? SERVER A

Hello all, I'm running slackware linux 8.0 and tries to configure samba 2.2.8a as PDC. I succeded configuring network shares i.e. netlogon, profiles, etc. Everything is OK, but when i tries to make a domain logon using windows 98 apears an error "Wrong parameter". When i tries to join my samba domain under Windows 2000 it says "domain does not exists ....". what am i

dear milist i'm newbie , i try to join my linux box to win nt pdc , i try follow documention in samba.org but still not working here the conditional of my server . server win nt PDC = 192.168.0.1 linux workstation = 192.168.0.10( linux mandrake 9.1+ samba ) in win nt PDc have been add win nt workstation with name linux ( linux ws) here my samba.conf [global] netbios name = linux