similar to: SWin98se & 4GB+ files

Hi I have recently installed samba on a RH7.0 box. This box has win98 + linux rh7 installed and both os's are running well. The F drive on windows is FAT32 and is mounted r/w on linux RH7. Works fine. I also have a Win98se machine that needs to have full read/write access to some partitions on the RH7 box. Samba was found ideal for such setup. The problem I have is that I can't write to

Well as a further to my last, I broke down and put a copy of Win98SE on a spare HDD in my Mandrake server box. First moment it was up and running, I tried to transfer the files between the two problem computers and BINGO! It worked. So sadly I must assume that the problem must lie on my Linux server :( As I have previously tried both Mandrake 8.0 and Redhat 7.1 and end up with the same transfer

Well the weekend didn't bring any solutions to this unhappy camper. I spent most of my time trying to narrow down the problem again. I started out by installing a quick copy of ZipSlack on the Win98SE machine to determine once and for all if the problem was a Windows problem or not. Well, I tried a simple FTP from the ZipSlack to my Mandrake 8.0 server and it hung up like in Windows. So I

Thanks for the answers so far but I haven't been able to come up with an solution yet :( Some new info (see bottom of email for history): 1. I upgraded to 2.0.10 on my Mandrake 8.0, no change to the transfer problem. 2. I attempted to ftp a file from the Win 98SE PC to my Samba Server, didn't work. So I can assume that it is not specifically Samba problem. 3. I have changed the NIC cards

I have been having an irritating problem with my home network. My network consists of 1 PC running Mandrake 8.0 as the file server with Samba 2.0.7, three PCs running Win98SE and one PC running Win XP. I have had the network running for almost two years in various OS configurations and for the most part have had smooth operations. However, my problem comes when I try and copy, move, or save any

>I tried the commands that you have presented and I running into >problems. I tried the ideology that you presented with both 32 and 16mb >configurations with no luck. Is there something that I'm missing? > >The win98se boot disk boots (just downloaded it from bootdisk today) so >I used that as a based for the boot file. > >Item 8c works fine (1.44 image) but 8b

Yello I use (or try to use :) wine 20010824 (installed from MDK rpm). If I try to run a app i get: #wine notepad.exe Warning: could not find wine config [Drive x] entry for current working directory /home/enrique/.wine; starting in windows directory. Loading required GL library /usr/X11R6/lib/libGL.so.1.2 And nothing more happens. My system conf: Linux Mandrake 8.0, kernel 2.4.8-24mdk, XFree

I am trying to transfer files between two OSX machines using a FAT32 formatted flash drive. I am transferring a "big" directory (7G). Basically I want to sync everyday my home and work computers for some directories. I tried many possible rsyncs (original supplied, fink 3.0.5/3.0.4 macports 3.0.5, rsync-2.6.3+hfsmode-1.2b2, 3.0.6+fileflags+crtimes) What I would really like to happen

Hello all, We've been using samba version 3.0.4 on RH9 with success for quite a while now for shares on our domain (DOM1). Since this machine will have to be available in the near future in another domain (DOM2) as a webserver, and limited fileserver, another network interface has been added for the NIC. When browsing the shares from a WIN98SE computer in DOM2, we are able to see the

I recently added a 60Gig HD to my little linux server at home with the intention of sharing it via Samba to all my PCs which run Windows 98SE. I really want to use vfat file system on it. The server is running Mandrake 8.1, so kernel 2.4.something, and the Samba that came with it. Much to my disappointment I quickly discovered poor performance copying files to it, the copy is like slow to get

Greetings, I'm running Linux Fedora Core 2 with Samba 3.0.3-5 installed. In Gnome, when I click Computer->Network->Windows Network->Workgroup I can see the Windows boxes on my network (2 Win98SE + 1 Win2000 Workstation). I can access everything on the 2 Win98SE boxes. I can print from Linux to a shared printer on one of the Win98SE boxes. When I click on the icon for the Win2000

https://bugzilla.samba.org/show_bug.cgi?id=10675 Summary: rsyncing >2GB file onto fat32 partition should fail earlier Product: rsync Version: 3.1.0 Platform: x86 OS/Version: Linux Status: NEW Severity: normal Priority: P5 Component: core AssignedTo: wayned at samba.org

> Hi Ady, > > On 2016.02.25 02:08, Ady via Syslinux wrote: > > There is an "extra" sector, in comparison to... what exactly? > > Sorry if I wasn't clear. I think I implied that the Large FAT32 fat size > had an extra sector compared to minfatsize, when of course I meant the > opposite (the Large FAT32 has one less sector than the minfatsize >

Hello, I'm trying to create and boot a Win98SE-DOS OS through Hard Disk emulation. My src files are from a Win98SE 1440K floppy image file, with a x86 boot sector (dl'd from the net - I have no floppy drive and a slow net link 3.2KB). I don't know what to put into the partition boot record of my image and how to load dos.bss properly (the docs explain for floppy images not for HD

Goodmorning. I need to connect a win98SE with a linux suse 7.3 with samba 2.2 server. I have write the smb.conf and testparm results ok. If i write security = share in smb.conf, i can access the linux directory without password request, but if i write security = user (to obtain authentication of user) i cannot connect to it, when i want map linux directory as disk (because it ask to me the

Hi. I have a base 10 hub, a SAMBA 2.2.6 server on a p200mmx, and a win98se box. Everything in DIAGNOSTICS.txt checks out fine, and everything seems to work ok until i try to send an iso image across. That is when smbd crashes (about halfway/300M), and win gives the error 'cannot copy or replace <filename>: the resource or device is no longer available. That is the exact error

I'm getting only partial iso8859-1 translation from an smbfs mount from my Win98SE machine. The smbfs mounted file system shows most lower-case accented characters fine; but, it substitutes underscores for most of the upper-case accented characters (and a few lower-case ones too): # uname -a Linux elm 2.4.18-8.1mdkian3 #7 Sat Aug 17 15:19:44 EDT 2002 i686 unknown (Mandrake 8.2 Linux with all

Hi, I have a custom linux system that runs off a FAT32 usb flash disk. I use syslinux to make it bootable and load the kernel. I'm trying to boot now from a SSD SATA disk (500GB) but it's not working and I can't figure out why. BIOS show that no bootable disk were found. What I already tried (linux fdisk): 1- Creating a new DOS partition table on the SSD, a FAT32 (type b), and

Hi, Which version of Mac OS X are you running? If you are on Mac OS 10.5.x then I can only suggest that you try either formating the drive to HFS + or creating a disk image with an HFS+ file system. If you are running Mac OS 10.4.x then ensure that that ACL support is enabled on the drive. The following URL contains information on how to check and enable ACL support :

Hi All, Setup :- NAS device is running with 2.6.13 kernel and samba 3.0.32.I have connected a 4GB USB flash drive having FAT32.USB drive is available from the windows machine as connected shared drive. >From my windows machine when I am trying to copy the file (>1Gb) to shared USB drive(FAT32).it is giving error as shared USB drive is not reachable. File copy is working fine with small