similar to: Problems

Hello, I am using Samba 2.2.3a on SuSE 7.2 with kernel 2.4.4.Usually client machine have W95/98/W2K OS. I have already seven Samba server instalations on the company's branches and it works fine ! However my testing machine with identical instalation started rejecting connections from W2K. On W2K, when I logging (not as domain user) recieve message " \\fs_vilnius is not accesible. The

Ok here is the setup: Server: OSS SUSE 10.1 (Clean as of now) ETH0 = External (Grabs IP from cable modem) ETH1 = Internal (Hands out IPs to clients on my network) DHCP Server works completely fine in plain SUSE kernel. However once I get into Xen kernal my DHCP server hands out IPs that look fine and even the DNS hands out fine. However my internet works only on the Server. REPEAT: Internet

Thanks Mikko - pieced the 3 links you sent and got new configs... Well..I have successfully got the PAM files so NT users can login from the terminal as well as through the samba shares (no local users required), including using the NT groups to provide share level permissions. Now here is the next battle: 1. I can not access the shares using the linux local accounts --> recieve: the

Hi, I am currently usind R to do a heckit maxlikehood model and I was wondering if there is anyway to do it but specifying the robustness of the std error. I would like it robust. I am currently working with: heckit(selection= ,outcome= , method "ml") Is there anithing else to type into this function to manage that? if not, Is there any other previous or later thing to do

Hi :) I'm doing same test with autodialout, placing a file in /var/spool/asterisk/outgoing, it's work good when I want to dial a number from a phone.... --MY-FILE------------------------------------ Channel: SIP/BGT100 MaxRetries: 2 RetryTime: 60 WaitTime: 30 Context: SIP_inbound Extension: 600 Priority: 2 --------------------------------------------------- Can I create a call from a

Hello all. I have an ISDN passive card (HC HFC 2BDS0) using HiSAX driver (since this is a passive card, I can't use the CAPI driver... ). "All" I want is recieve faxes and store them on diferent folders depending the destination number. So far I was able to do a similar thing with voice (vbox), but what I really pretend is recieving faxes. My system is a SuSE 9.2 and has instaled

Having big problems and for months. Our service provider (via:talk) says they are Asterisk friendly but they are not. Here are the specifics (please read the bottom of the msg too) System: Dell SM Business server 2GB RAM, Core II Processor (should be plenty) OS: open SUSE 11 Asterisk Version: 1.4.2 Asterisk GUI Version: 2.0 The system was completely set up using the Asterisk GUI with a

Hello, Samba team! I am very new to Linux and Samba, so probably my problem is that I need to study more Linux basic concepts, but in the meanwhile, I need to get this working: I have to print from a Linux Suse 7.2 box, where I have installed Samba, to a printer connected to an NT box. I have found things written for printing the other way around, but not too much this way. I defined a printer

Hello guys! I am having problems getting samba 3.0.1 to compile correctly. I am currently using a SUSE 9. I have compiled a few extra things and put everything under "/opt". I am using the latest MIT Kerberos(located under /opt/kerberos), mysql 4.0.1 (located under /opt/mysql-4.0.1), openldap 2.2.4(located under /opt/openldap) I am using this config:

Better read up on why a sip phone should register with asterisk. Do a 'sip show peers' and that will be the list of phones that can "receive" calls. ------------------- I've double checked this. Everything is logging in fine, because I can make calls, check my voicemail, everything except recieve calls on the SIP devices. David Phelan wrote:

Hi, I've just installed Icecast and can't start it... Ok, I have Red Hat linux 9.0 I've downloaded icecast-2.2.0.tar.gz file... I've installed it using: .configure make make install Next I've edited - /usr/local/etc/icecast.xml then I type the command: icecast - c /usr/local/etc/icecast.xml and I recieve this message: "ERROR: You should not run icecast2 as root Use

Hi, I've just installed Icecast and can't start it... Ok, I have Red Hat linux 9.0 I've downloaded icecast-2.2.0.tar.gz file... I've installed it using: .configure make make install Next I've edited - /usr/local/etc/icecast.xml then I type the command: icecast - c /usr/local/etc/icecast.xml and I recieve this message: "ERROR: You should not run icecast2 as root Use

On Sat, 6 Apr 2019 17:21:26 +0200 Martin Krämer <mk.maddin at gmail.com> wrote: > Hello Rowland, > > thanks for your help. > Below my comments > > See here: > > > > http://apt.van-belle.nl/ > > > From stability point of view I always had the best experience by > saying with the debian default repository. > Additionally as you have seen blow I

On Thu, 17 Feb 2005 08:21:56 +0100 "Marc Juette" <m.juette@fox-netcenter.de> wrote: > > Hello, I?m writing to you, because i?ve had the same problem with SuSE 9.2 and bridging. I tested a few setting (bridging as module, bridging compiled within Kernel...), but nothing matched. So I decided to install 9.1 and test again. And wow, it worked with only a few command lines:

Hi, did anybody succeed in building R on SuSE Linux 9.1? My compilation failed with the following error messages: make[4]: Entering directory `/home/lederer/Source/R-1.9.0/src/modules/X11' gcc -I. -I../../../src/include -I../../../src/include -I/usr/X11R6/include -I/us r/local/include -DHAVE_CONFIG_H -D__NO_MATH_INLINES -mieee-fp -fPIC -g -O2 -c d ataentry.c -o dataentry.lo In file

Hello List, I have successfuly brought samba 3.0 on SuSE (8.1,8.2,9.0) to work together with an Active Directory Server. I have (also successfully) enabled squid to use winbind for authentication for internet access. (I need winbind, because only members of a certain AD Group are allowed to access the internet.) Kerberos is running fine. My Problem is: After I add a new user to the AD: With

Hi everyone, I have so many problems with samba on one PC with SuSE 9.1 on. This PC is on a local area network with another PC with SuSE 9.0 on it with a working samba connection, and some windows clients. My 9.1 PC has an ASUS P4S800 motherboard and I use the integrated Asustek sis900 ethernet lan configured as eth0 with the sis900 module. Static IP and static gateway (the SuSE 9.0 machine).

We are trying to install R2.2.1 on a IBM P655 Cluster, SuSE LE 9.1 We are using gcc v 3.3.3 and we are getting this error on make g77 -fPIC -g -O2 -ffloat-store -c dlamc.f -o dlamc.lo g77 -fPIC -g -O2 -c dlapack0.f -o dlapack0.lo g77 -fPIC -g -O2 -c dlapack1.f -o dlapack1.lo g77 -fPIC -g -O2 -c dlapack2.f -o dlapack2.lo g77 -fPIC -g -O2 -c dlapack3.f -o dlapack3.lo g77 -fPIC -g

SUSE 9.1 samba-3.0.9-2.6 samba-client-3.0.9-2.6 I am getting some errors that I can't seem to track down in any of the archives. I came across this problem when trying to delete a driver none of the printers are listed in the smb.conf - it is all being generated from the cups and the printcap that cups makes on load First enumprinters works: rpcclient $> enumprinters

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Paulo Augusto wrote: > Hello, > > I´d like to know if Shorewall (RPM) supports SuSE 9.1. > I remember that SuSE 9.0 comes with Shorewall but SuSE 9.1 not anymore. > In the future, please ask your Shorewall questions on the Shorewall User''s list. I run Shorewall 3 SuSE 9.1 systems -- I don''t believe though that SuSE