similar to: Problem using Samba to access nfs mount on linux to EMC share from WinXP

I see list discussions on this subject from a few years back but they were very brief and, it seems, inconclusive. I would be interested in hearing from anybody who has discovered the "trick" to getting an EMC Celerra to join their Samba 3.x domain. I have an old NetApp Filer happily joined. I simply created an account with "smbldap-useradd -w filername" and when I then

Hi Everyone, I'm trying to get smbclient to cooperate with my new EMC Celerra (just got it a little while ago) using kerberos. My windows domain environment is win2000 + sp4, the EMC is "joined" to the domain. I am using samba 3.0, fresh sources, and MIT KRB5 1.3.4, all freshly built. I join the domain, etc. everything is happy. I use kinit user@REALM to get my initial tgt.

That should say below, we are using Powerpath on the CX300's AND the CX600's... ----------------------------------------------------------------------- We are using Powerpath with CX300's and Emulex HBA's, also with OCFS on Red Hat 2.1 AS. Kernel upgrades are the biggest issue that we have, as some of the drivers are dependent on modules built for specific kernels, and if your

A couple years ago, we moved to Oracle RAC on Linux using ocfs that is SAN attached to an EMC CLARiiON. At the time, there was a reason that we did NOT use EMC's Powerpath (I just can't recall what that reason was). What I'd like to know is if there are any issues with introducing Powerpath now. * RHEL 2.1 AS * 2.4.9-e.38enterprise * ocfs-2.4.9-e-enterprise-1.0.13-1 * EMC

From: Harald Finn?s > You seem to know what you're talking about, Seems v. Knows is a whole new ballgame. But I have been deploying SCSI on Linux since 1993 (Advansys, now owned by LSI, was the first vendor to formally support Linux), SCSI RAID on Linux since 1997 (large ICP-Vortex), through 3Ware's original FPGA ASIC designs in the AccelATA and Escalade 5000 series in 1999+. For a

Hi, I'm getting "Permission denied" error while connecting to a EMC cifs share from samba client on unix machine. Looking at the packet capture it is observed that ?samba client is authenticating with "anonymous" instead of the user name that has been provided. Here are flags received from EMC server as part of ?"Session Setup AndX Response, NTLMSSP_CHALLENGE,

We are going to be migrating to a new EMC frame using Open Replicator. ZFS is sitting on volumes that are running MPXIO. So the controller number/disk number is going to change when we reboot the server. I would like to konw if anyone has done this and will the zfs filesystems "just work" and find the new disk id numbers when we go to zfs import the pool. Our process would be: zfs

Hi, We had received a new EMC storage (Clariion CX4) and the EMC analist has told us that CentOS aren't on their support list, but RHEL are :) Well anybody on the list has a CentOS host talking (iSCSI) with an EMC storage, preferably using the EMC Powerpath software, and can talk about you experience? Or I will need to buy some REHL licenses ? I'll put my hands on it only next

To recap: T100P card wouldn't sync with the telco using line side clocking ( span=1,1,0.........) Had to use internal clocking (span=1,0,0.......) zttool showed Tx/Rx Levels as 0/ 1 For the grins of it I replaced the T100P card with another newer card from inventory. This newer card has the same rev on the ASIC / FPGA but doesn't have any of the various jumper headers installed

Hi all, Can anyone explain to me, or point me to any docs that explain how the following numbers map together? I have multiple LUNS exported to my HBA''s from multiple EMC arrays. zpool status, and /dev/dsk show device names like: c0t6006048000038794003753594D333837d0 ONLINE 0 0 0 c0t6006048000038794003753594D333838d0 ONLINE 0 0 0

Hi, I'm getting "Permission denied" error while connecting to a EMC Celerra (version 7) server from samba client on unix machine. Looking at the packet capture it is observed that samba client is authenticating with "anonymous" instead of the user name that has been provided. Here are flags received from EMC Celerra 7 server as part of "Session Setup AndX Response,

I have a couple EMC relabled ACBEL/Polytech UPSs which I'm unable to find anything about. What I do know is that ACBEL/Polytech is CoolerMaster, however, they don't make UPSs that I know of. These UPSs were used as part of an EMC Clarion array. Does anyone know anything about these? Thanks, Mark. -------------- next part -------------- An HTML attachment was scrubbed... URL:

We have an appliance that uses the CentOS 4.4 Plus kernel with XFS on an EMC RAID array that performs about ? or less as well with cached i/o than with direct i/o. With direct i/o we get about 32Mb/s throughput or better, but if we enable the cache for the EMC RAID, we only get 8Mb/s or less. This doesn't happen if we use JFS, where we get a little less than 32Mb/s throughput with or without

What is the best write performance improvement anyone has seen (if any) on a ZFS stripe over EMC SAN? I''d be interested to hear results for both - striped and non-striped EMC config.

OEL 5, OCFS 1.4, using EMC Power Path for multi pathing. I want t mount the OCFS2 file system on the emc power path device. I can mount by UUID, and not have to worry about persistent bindings across nodes. But how do I make sure when it mounts by UUID , that the pwoer path device is used. Any help will be much appreciated. Thanks -- Sridhar Avantsa savantsa at gmail.com -------------- next

I?ve an issue related to Oracle 10g RAC. I?ve 2 node cluster each being Dell 2850 Server with RHEL 4.0 I?ve EMC CX300 SAN storage with following partitions /orasoft 10 Gb OCFS2 File system /oracrs 2 Gb OCFS2 File system /orabackup 100 Gb OCFS2 File system The datafiles are on ASM which is not directly visible in OS.

Greetings, I am trying to join a EMC Celerra NS502 CIFS server to our Samba 3.0.21a domain controller. According to EMC, I was told that we need to manually create the machine account first. How is the best way to do this? We are using an openLDAP backend, using the idealx scripts. Joining a windows machine from the computer properties dialog of that machine works perfectly. Things I have

It is very relevant that LLVM look into handeling HDL and other binary and analogue operation modeling capbilities, as well as expand this abstractly above in the other direction to include complex structure optimization that is critical in realtime, dynamic and VM operations. Without confirming the true characteristics of the lower structure types and operating characteristics (especially

Is anyone using CentOS 4.4 with an EMC Clariion SAN? In particular, I want to know if PowerPath and Naviagent will work on a CentOS 4 system connected to a san using Qlogic or Emulex cards. I tried a couple years ago with Fedora Core 1 or 2, and couldn't get the kernel modules from PowerPath to work since the kernel wasn't the official RHEL one. I'm most interested in

Hi I'm sorry if this question has been asked and answered. Does anyone know that EMC Celerra filer can join samba 3 domain? Thanks,