similar to: CentOS 4.5 - ProLiant DL585 G2 - Mouse Issue

Hi, I have been trying to install CentOS 5.1, 5.2,and 5.3 and the HP server but to no success. It starts loading well the on trying to load the cciss driver, the machine hangs there and refuses to move on. Any help will help quite alot. Thanks

I have a task to set this up, but don't have access to it until I finally I am needed to do it. If anyone is familiar with this server, do you know if the motherboard based raid is software based (I can't find any real pointer at hp's site)? If so, I suppose it would be better to install CentOS and setup raid inside of Linux. Given that I have never used anything but hardware raid,

My local centos mirror (ftp.crc.dk) failed to boot after having upgraded from centos 5.0 to 5.1 (i386). It just displays GRUB The cursor is positioned to the right of a space after GRUB, and no input is accepted. I've tried booting in rescue mode and run: chroot /mnt/sysimage grub-install /dev/cciss/c0d0 This completes without errors, but still it can't boot. It's a HP/Compaq

Hi folks, I've just spent about six hours messing around with an HP DL585 G2 server trying to get CentOS to go. This box is a dual-CPU with dual cores and 10GB of RAM total. According to the datasheet, the POST screens, and the BIOS, it has the Broadcom embedded NICs in it. The problem boils down to the installed OS (4.4 x86_64) not seeing the NICs. If you do an lspci on the system

I run a CentOS/Fedora mirror with rsync access. I have the following rsyncd.conf file: read only = true transfer logging = true pid file = /var/run/rsyncd.pid log file = /var/log/rsyncd.log dont compress = * [Fedora] path = /var/ftp/pub/mirrors/fedora comment = Fedora mirror [CentOS] path = /var/ftp/pub/mirrors/centos comment = CentOS mirror My problem is that

I have a CentOS 5 machine with an external 500G USB disk, formatted with JFS. How do I get this to mount automatically at boot time? If I add to /etc/fstab: /dev/sdb1 /var/video jfs defaults 1 2 fsck.jfs complains at boot time: Error: Cannot open device /dev/sdb1 Usage: fsck.jfs ... ... Give root password for maintenance ... If I log in with the root password, /dev/sdb1 is present, and I

I'm trying to set up my Centos 5.1 box at home to run mythtv. The DVB-T card requires saa7134 and saa7134_dvb. These are not in the Centos kernels. Centosplus has saa7134, but not saa7134_dvb. Do I have to compile the kernel myself, or is there a trick? Mogens -- Mogens Kjaer, Carlsberg A/S, Computer Department Gamle Carlsberg Vej 10, DK-2500 Valby, Denmark Phone: +45 33 27 53 25, Fax:

Hi I am trying to get httpd onto a freshly updated, although long time ago installed CentOS 4 box. Its fully updated to 4.7 however when trying to install httpd this is the error i get, well i should say install is fine but httpd cant start. # yum install httpd -- snip -- Dependencies Resolved ============================================================================= Package

HP doesn't support Fedora on Proliant hw so you can't just install their ILO and get access to hw info like cpu/mb/temperature,powersupply status,fan info aso. I used the link below to get that access, which enabled me to write a small script that sends snmp-traps to hp-ovo. I did spend quite some time myself until I found this link.

Yesterday, I've moved all my samba users from a redhat 9 (i386) system to a Centos 5 (x86_64) system. This runs samba-3.0.25-7. The system uses NIS authentication, no shadow files. Now all my Windows users have accounts that expire today! Strangely, if I do a: # pdbedit -L -v mk I get: Password last set: Tue, 18 May 2004 15:04:30 CEST Password can change: Tue, 18 May 2004 15:04:30

Dear All Has any one had any success with getting a Linux box to register with a DNS server hosted on a Windows 2k3 server? This process takes place automatically on the Windows boxes but not at all on the Linux boxes. We run our Intranet/Web servers on Linux but the whole of the rest of our network is run on Windows. In the past we have used SAMBA to maintain WINS entries but would now like

Hi knowledgeable samba users, I had to upgrade from samba 2.2.0 on a suse linux server (7.2). Server died after two 2+ years of loyal services - otherwise I would not have changed... Now I have a samba 3.0.9-2.6 on suse 9.1. I can access the files only r-x, i.e. all files appear as read only. Trying to trouble shoot I have: - chmod-ed all the files of all the shares to 777 - in swat put the

Dear Sir, Recently I've upgraded our Samba installation. After then I find that all WinXP workstations cannot logon to the server. The official HOWTO mentioned this problem and suggested resetting the SID using "net setlocalsid ....". But this does not help in my case. The SID of our server has not been changed. So I've to go to every workstation for rejoin the domain. This

Hi I recently installed some hba's into a bunch of these 585's as they are forming a RAC cluster - previously to this they were all using DAS without issue. After the qlogic cards were installed i reinstalled the OS and now once installed the OS will not boot - the box just reboots continuously, it does not even appear to get to grud, although this could be the ilo not displaying

Is anyone successfully running asterisk on an HP proliant while using their management software, hpasm? I have two DL360's and two TE220B's. The cards have their own IRQ's. No matter what combination of settings I use, the cards fail the patlooptest if hpasm (ver 7.9.1) is running. If I stop it the cards pass the test. I really want to run the management software, so I'd

Hi all, when I do a "grep JERRY *.h" nothing is returned which is what I expect. This is in my source directory... when I do a "grep JERRY *" every file is returned an a line printed even though there is no JERRY on the line. Then if I do a "grep JERRY *.c" just the 4 lines that have JERRY are returned. This is what is prints for "grep JERRY *" src#

Hi everyone...I'm at a dead stop setting up Samba, so let me jump right into the problem: First, the setup: I have a RH7.3 box and a W98 laptop. The RH box also has a W2k Pro partition. We have them on a 4-port 10base-T hub along with our RoadRunner cable modem. Now on to the problem: As most of you are already aware, RR uses DHCP to assign IP addresses to client machines at boot time.

Scenario: Centos 5 x86_64 machine with samba-3.0.23c-2.el5.2.0.2 The machine is a PDC, Windows 2000 users logon, get profiles, etc. I'm trying to set up a folder in apache that uses NTLM authentication using mod_auth_ntlm_winbind. I've followed: http://adldap.sourceforge.net/mod_auth_ntlm_winbind.php winbindd is running, and ntlm_auth seems to work: # ntlm_auth --username=pdc2

Hello, I am running a fileserver with smbd here. The server is a 64bit 2.8 GHz Celeron D with 2GB RAM, running 64bit Debian, Samba version 3.0.23c. It is running as a pure fileserver so its only CPU load is serving files. The client I am doing the tests from is WinXP Pro SP2. It is connected via Intel e1000 gbit ethernet (both the server and client use e1000 chipsets). I have done a raw tcp

Hello Everyone, I recently installed CentOS 5.5 x86_64 on a brand new ProLiant DL380 G7. I have identical OS software running reock-solid on two other DL380 ProLiant servers, but they are G6 models, not G7. On the G7, the installation went perfectly and the machine ran great for about 2 weeks, when it just seemed to "stop". The system stopped responding on the network, and there was