similar to: Auto printer dirver install for windows client

Hi, (cc. asterisk-users, hope that is not a big Faux Pas) I've had trouble with the qozap driver for a LONG time now, where it will not recognise and ignore a missing ISDN2 line on a quad card if one of the 4 ports is unplugged or somehow faulty. The symptom is that is correctly recognises the fault, but then clears the RED ALARM almost immediately, leaving Asterisk thinking that it can call

OK, I have been wrestling with this for two weeks now, so somebody please help ! We have an existing Samba Print Server, running RedHat linux, kernel 2.2.19, that runs fine, but is a P133 with 64 mb ram. So we built a new PC, the slowest thing we could buy, a duron 1 ghz with 512 mb RAM. Old printer server is running Samba 2.2.5, new printer server is running samba 2.2.5, and Slackware 8.1,

Hi, sorry if this is off topic, but it only happens when samba is involved, maybe anybody here has an idea. System info: - Clients used were Win10, ranging from 1803 to 1903. - The DCs are running Samba 4.7.6. - The print server is a member server. I tried both scenarios with two samba print servers, Ubuntu 18.04, Cups 2.7. One had Ubuntus Samba, 4.7.6. The other used Louis van Belles 4.10.7. -

L.S. Situation: I am running Samba 2.2.7a as my DPC in a small business network with win98/ME clients. A big Fiery printer/scanner/copier device is also part of this network. It has its own printserver. Since Win98/ME can not print to an LPD queue directly, I have setup Samba to spool the printjobs send by the clients to the Fiery server. All is working well, but there is a small problem. This

Hi List I'm trying to update to the lastest kernel but I have a dirver that is not inculded in the distrubution, and I had to use the driver disk when installing centos 4.4 in the first place, The driver megasr .ko works fine with the installed kernel but I cannot find on for the updated kernel, any adive would be appreciated. without the updated driver there is a kernel panic on boot due to

Hey, I posted a few days ago about how the printer paper sizes are differ from the admin account when they are installed. People at my work are getting pissed at the moment and all they want to do is to be able to change the paper sizes themselves and not have it done at the server Is there a way to do it? I fluked it at one stage and had it working like that, I think I deleted the driver

hello list, i have a question related to zapata.conf,if i do any change in zapata.conf i must restart asterisk or just i restart zapata ,and how to do . ?service zaptel restart? or there is any other command Thanks and regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

http://bugs.freedesktop.org/show_bug.cgi?id=16450 Summary: Powerbook G4 12" (NV34M [GeForce FX Go5200]) freezes on X restart - Fedora 9 Product: xorg Version: unspecified Platform: Other OS/Version: All Status: NEW Severity: normal Priority: medium Component: Driver/nouveau

Hello All -- We are trying to consolidate our printer management from a series of NT print servers to a series of Samba ones, in a global network with ten offices and about 150 printers. All printing is PostScript and goes to HP and Canon printers over lpd through custom 'if' filters which do accounting. To help this we're trying to automate the printer and driver registration

Hello, I have bought Powerman Optima 500 Plus UPS. While this product might be unknown outside Russia, it is shipped with megatec software and obviously works with megatec driver in NUT. besides the following problems (I think they are caused by one reason): 1) megatac driver is able to load and detect UPS only on second or third run. On the first run it typically fails. Later if daemon is

Ok, here's my setup: I've had a samba file server going for about a year now. It's Samba v2.05a on a RH6.0 sys. Currently we have a printer server running on a Winblows NT box. This NT box has the following printers: HP5si, (4) HP4000, and a few HP4s. All of those printers have Jet Direct ports on them. What I want to do is, move all the printers over to the Samba box and KILL the NT

From: Li Liu <john.liuli at huawei.com> This set of patches try to implemet irqfd support of vhost-net based on virtio-mmio. I had posted a mail to talking about the status of vhost-net on kvm-arm refer to http://www.spinics.net/lists/kvm-arm/msg10804.html. Some dependent patches are listed in the mail too. Basically the vhost-net brings great performance improvements, almost 50%+.

From: Li Liu <john.liuli at huawei.com> This set of patches try to implemet irqfd support of vhost-net based on virtio-mmio. I had posted a mail to talking about the status of vhost-net on kvm-arm refer to http://www.spinics.net/lists/kvm-arm/msg10804.html. Some dependent patches are listed in the mail too. Basically the vhost-net brings great performance improvements, almost 50%+.

I am able to see my printer as a share. Well better put, I see four representations of my printer: ascii, lp2, lp-mono, and raw. I tried the naive thing and just selected lp2 and added the cannon bjc 4000 driver for NT. This didn't work. I get an error report: %%[ Error: undefined; offending Command: K ]%% . . . a bunch of strings that I don't understand. This does not look like the

On 10/27/2014 12:23 PM, Li Liu wrote: > > > On 2014/10/27 17:37, Peter Maydell wrote: >> On 25 October 2014 09:24, john.liuli <john.liuli at huawei.com> wrote: >>> To get the interrupt reason to support such VIRTIO_NET_F_STATUS >>> features I add a new register offset VIRTIO_MMIO_ISRMEM which >>> will help to establish a shared memory region

On 10/27/2014 12:23 PM, Li Liu wrote: > > > On 2014/10/27 17:37, Peter Maydell wrote: >> On 25 October 2014 09:24, john.liuli <john.liuli at huawei.com> wrote: >>> To get the interrupt reason to support such VIRTIO_NET_F_STATUS >>> features I add a new register offset VIRTIO_MMIO_ISRMEM which >>> will help to establish a shared memory region

ROracle ploblem I can't install ROracle in the window XP. Is there any way to install ROracle package on the windows OS ? I think I can enhance data acquisition performance using oracle native dirver instead of using ODBC. Tae Sik Han. North Carolina State University.

Hello, Hello, I am running Samba version 2.2.8a, cups 1.1.19 and esp print pro version 4.3.1 on my server, which is running Slackware 9.1 and Canon BJC-85 USB printer as default printer on the server and kernel 2.4.22 I can connect and print to the server using smbclient, but I cannot figure out what to put in the CUPS configuration, or the /etc/samba/smb.conf to print to this printer all

On 25 October 2014 09:24, john.liuli <john.liuli at huawei.com> wrote: > To get the interrupt reason to support such VIRTIO_NET_F_STATUS > features I add a new register offset VIRTIO_MMIO_ISRMEM which > will help to establish a shared memory region between qemu and > virtio-mmio device. Then the interrupt reason can be accessed by > guest driver through this region. At the

On 25 October 2014 09:24, john.liuli <john.liuli at huawei.com> wrote: > To get the interrupt reason to support such VIRTIO_NET_F_STATUS > features I add a new register offset VIRTIO_MMIO_ISRMEM which > will help to establish a shared memory region between qemu and > virtio-mmio device. Then the interrupt reason can be accessed by > guest driver through this region. At the