similar to: Problem with internal traffic

Hello, My machine is running Software RAID 5 on /dev/hde1, /dev/hdg1,/dev/hdi1. I noticed on the log that suddenly we are getting messages such as : Oct 14 01:27:16 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure Attribute: 8 Seek_Time_Performance changed from 247 to 246 Oct 14 01:57:15 localhost smartd[4801]: Device: /dev/hde, SMART Prefailure Attribute: 8 Seek_Time_Performance

Issue: Vista reads slowly from a samba server. This appears to pop up periodically here and elsewhere. My samba.conf file has: [homes] ... vfs objects = readahead As suggested elsewhere. Writes are approximately 17-18MB/s which is acceptable. Reads are in the 8MB/s range which is appalingly slow. Using linux smbclient and windows XP clients I can read at 25+MB/s. I've enabled vfs

> PDC20265: IDE controller at PCI slot 0000:00:11.0 > PCI: Found IRQ 10 for device 0000:00:11.0 > PDC20265: chipset revision 2 > PDC20265: 100% native mode on irq 10 > PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary > PCI Mode. > ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:DMA, hdf:pio > ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:pio,

On 8/5/2015 12:34 PM, Chris Murphy wrote: > On Wed, Aug 5, 2015 at 9:12 AM, Bowie Bailey <Bowie_Bailey at buc.com> wrote: >> I am trying to upgrade my system from 500GB drives to 1TB. > I'm going to guess that there are no IDE drives that have 4096 byte > physical sectors, but it's worth confirming you don't have such a > drive because the current partition

Hi, I have read this thread and want to say that I have expirienced the same problem. Once, when I was loged in, one of my filesystems ( root filesystem :( ) became read-only with the same symptoms. But results was more tragic. Almost in each directory avg. 10% of files had incorrect attributes, owner, links, etc. But filenames was correct. So, I was obliged to re-create root filesystem :(

Hi Andre, ext3 folk, It would be really great if you could help me out here, I'm not sure if this is a hardware issue, a driver issue, an ext3 issue or some combination of them... I have a KT133A motherboard with an on-board promise controller, and an ACARD ATP865 in a PCI slot. I'm running 2.4.19-ac4 with the lvm 1.0.5 patches. The acard has two drives, hde and hdg attached to it, both

Hi, This morning one of my servers (centos 4.5) refused to boot. The console shows a lopp message grub loading stage2... I've been able to boot from the install CD choosing the rescue option. I can chroot /mnt/sysimage with no problems and even started the services (network, mysql , httpd etc). How can I solve this? I've followed the manual (

I'm trying to install CentOS 2.1 on SATA drive that lives on ICH7R controller. I have the controller setup in BIOS to "compatibility" mode, which means it should look just like regular IDE controller to the OS. In this mode, ide0 and ide1 are PATA controllers, and 4 SATA ports are mapped to ide2 and ide3. If I boot from the 2.1 installation CD, all the drives are detected

Hello, this morning my centos 5 server (2.6.18-53.1.4.el5) failed on the dvd device and disabled dma. The dvd-writer (/dev/hdg) is connected to the following controller as a secondary master. 02:07.0 RAID bus controller: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host Controller (rev 02) There is also an harddisc as primary master connected on this controller. This harddisc is the only device in

- Ahh OK now I see why I was confused. The originally posted partition map uses cylinders as units, not LBA. I missed that. Cylinder 1 is the same as LBA 63. And that is sufficiently large for a GRUB legacy stage 2. - OK this is screwy. Partitions 1 and 3 on both drives have the same number of sectors, but partitions 2 differ: /dev/hde2 401,625 975,691,709 975,290,085 fd Linux

I am trying to upgrade my system from 500GB drives to 1TB. I was able to partition and sync the raid devices, but I cannot get the new drive to boot. This is an old system with only IDE ports. There is an added Highpoint raid card which is used only for the two extra IDE ports. I have upgraded it with a 1TB SATA drive and an IDE-SATA adapter. I did not have any problems with the system

On Wed, Aug 5, 2015 at 10:52 AM, Bowie Bailey <Bowie_Bailey at buc.com> wrote: > > On 8/5/2015 12:34 PM, Chris Murphy wrote: >> >> On Wed, Aug 5, 2015 at 9:12 AM, Bowie Bailey <Bowie_Bailey at buc.com> wrote: >>> >>> I am trying to upgrade my system from 500GB drives to 1TB. >> >> I'm going to guess that there are no IDE drives that

On Monday 14 March 2005 06:29 pm, Mark Williamson wrote: > > I don''t know if this is the right place to post, but I can''t find any > > info about my problem on the net. > > Yes, this is the right place. > > > title Xen2610 > > kernel /boot/xen.gz dom0_mem=131072 console=vga > > module /boot/vmlinuz-2.6.10-xen0 root=/dev/hde1 ro console=tty0

hi guys: is there any passes or compiling options that can aviod to generate vector instructions and 'select' instruction in IR. i think that these instructions can be replaced with other instructions in LLVM IR. So if there is a way to eliminate these instructions during compilation? -- View this message in context:

Hi, This issue only happens on my IA32E VMX domain. IA32 VMX domain is okay. I am trying VBD disk in IA32E VMX domain. I used following disk configuration to create an IA32E VMX domain. disk = [ ''file:/mnt/disk1.img,hda,w'', ''file:/mnt/disk2.img,hde,w'' ] After creating VMX, its keyboard can not be used properly. For example, if pressing

Hi, I cannot seem to find a good answer for what I am doing wrong; I am simply trying to rsync a directory from one large disk partition to another disk, both ext2, on the same physical system by using the command: rsync --archive -v /etc /mnt/hdf/ I systematically get the following errors: # rsync --archive -v /etc /mnt/hdf/ building file list ... done etc/ etc/mtab etc/ntp/drift

On 8/5/2015 1:00 PM, Chris Murphy wrote: > On Wed, Aug 5, 2015 at 10:52 AM, Bowie Bailey <Bowie_Bailey at buc.com> wrote: >> How would I go about pointing it at the partition? >> >> What I am currently doing is this: >> device (hd0) /dev/hdg >> root (hd0,0) >> setup (hd0) > > setup (hd1,0) > > It's hd1 if your device map is correct and

hi Sam: thank you for your reply. but i have another question about this 'select' instruction. i think that in LLVM IR, i can use a branch and two seperate assignments to replace 'select' instruction(am i right?). so is there any compiling option to aviod generate 'select' instruction? -- View this message in context:

OK, been perusing the archives and Google, but can't find what I want. I'm building up a 512 MB compact flash using the CLFS directions to build the filesystem. That works great, but I would like to use extlinux to make the cflash bootable on my little SBC. However, to date, no dice. Attached is my extlinux.conf file and the steps I have used to make this work. Initially I tried to

HI R lovers, I have been facing a petty trouble with datas' import : I have a plain txt file (see attached file or the copy below) that I cannot read either with scan or read.table > scan(file="F:/Alt/HDG/Stoliaroff/Data/test.txt") Error in scan(file = "F:/Alt/HDG/Stoliaroff/Data/test.txt") : "scan" expected a real, got "??6" >