similar to: 3.0.0 on RH9, throughoutput problems

Hi all, I have configured Asterisk using database. The real time is working pretty well. That is asterisk is picking up details of peers and the extensions as well properly from the MySQL database. -- Executing Wait("SIP/bharat-f720", "2") in new stack -- Executing NoOp("SIP/bharat-f720", ""Welcome to Asterisk"") in new stack

An INTEL Server motherboard model SE7501BR2 with an onboard Adaptec AIC7901 controller (with HostRAID) is not being recognized by CENTOS 4. The AIC79xx driver loads correctly, however it does not "see" the fact that I used the HostRAID onboard software to create a RAID 1 set. I went to the INTEL site and only found a driver for RHEL 3.0 and I was unable to find a driver on the adaptec

Hi, I'm unable to write to shares on the RH9 box from win2k clients. Have successfully joined domain with 'net join ads' getent passwd lists local unix users and win2k domain users successfully I've mapped a DOMAIN+user_group to unix user_group, which 'net groupmap list' shows successfully I have tried various ways to give DOMAIN+user.name access to the share, by changing

Hello everybody, First time installer and I need the lists advice. My plan is to use asterisk PBX with some hardware to terminate my calls coming from several operational gnugk gatekeepers. Do have RH9 and downloaded the latest asterisk from CVS. Compiled according instructions and is running fine. Could hardly find any info on h323 implementation untill the REAME in the channels directory.

After upgrading our PDC to 3.0.0 last night(and confirming logins worked properly)...this morning, we had two machines report errors says the machine account does not exist or has been changed. Last night, users- even ones who had not been on that particular workstation before- were able to login on at least 6 out of 30-40 workstations. All configuration files were moved over, including the

Hi, what is Samba speed limit? I usually get maximum throughoutput about 3-4 MBytes/s reading from Samba, 2-3 MB/s writing to Samba server. (IDE discs, but 256 MB memory, Athlon 900 MHz, one 500 MB file, 100 Mbit network). What are your results? Does anybody knows about some performance tunings? I have adjusted only this: socket options = TCP_NODELAY SO_RCVBUF=16384 SO_SNDBUF=16384 write cache

On 10/10/2016 5:33 PM, John R Pierce wrote: > I've got a pair of identical CentOS 6.7 servers, with SuperMicro > X8DTE-F motherboards, these have 2 each Intel 82574L ethernet ports. > The eth0 ports are plugged in with 10' runs of brand new cat 5e cable > to a Cisco Nexxus 9000 switch (provided by the data center). > > These servers keep coming up at 100baseT rather

CentOS 6.2......... Why do the physical interfaces report (correctly) that they're negotiated at 1000Mb/s, but when I `cat /proc/net/bonding/bond0` I get 100Mbps for the member interfaces, and when I ` mii-tool bond0` I get 10Mbps for the bond? ----------------------------------------------------------------------------------------- ethtool em1 Settings for em1: Supported ports: [

Greetings all, After running for more than a year without issue on debian lenny while it was in the testing- we're now experiencing problems under Lenny/Stable. Dovecot now converts some sort of lockfile into messages, and they're owned by root. The result is a mess; clients can't read their mailboxes with the root-owned files, and when the file is changed to be owned by them, many

Hep Trying to get pfifo to work. Setup : |------|<--->eth1 (192.168.10.0/24) eth0---| GW |<--->eth2 (192.168.11.0/24) |------|<--->eth3 (192.168.12.0/24) read all documentation : http://lartc.org/howto/lartc.cookbook.interactive-prio.html here is my TOS mangling rulse in iptables : $IPTABLES -A PREROUTING -i eth1 -t mangle -s 192.168.10.0/24 -p tcp --dport

in dom0, how does one get and set the link information for a NIC? In a non-xen kernel, we could get this info by simply running: # ethtool eth0 Settings for eth0: Supported ports: [ TP MII ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full Supports auto-negotiation: Yes Advertised link modes:

? Hi, ? I have a computer with RH9, I've installed openldap and samba. I've configured OpenLdap and it runs ok. I've added a LDIF file with ldapadd and I had no problems, and I've configured smbldap-tools. I've configured linux using the command authconfig, no problems again. However, I have a probem when I try to test my system: I can create a system account in LDAP:

Hi, Has anybody noticed that tcng-9e cannot be compiled on RedHat 9? The error is in the tcsim directory, with error message shown below, -------------------------------------------------- ./setup.klib sed: -e expression #1, char 61: Invalid range end make[1]: *** [klib/.ready] Error 1 ------------------------------------------------- It seems the error comes from the newer version of

I have gotten WINE installed and working with RH9 and installed Office 2000 I can get excel to work and get word to start but it can not save the files. Any ideas? James jdickson@cimtel.net

Hello from france, this little question cause i don't understand this in my samba logs for each of my windows XP SP1 clients : "getpeername failed. Error was Noeud final de transport n'est pas connect?" by thousands !! If someone have an idea :-) See you, ______________________________________________ Emmanuel Fournier - ISCAM - ICT mailto:fournier@ict-toulouse.asso.fr

Hi, I tried to compile source because for RH9.0 doesn't exist binary. During compiling I got error: *********************** make[3]: Entering directory `/home/allans/R-1.6.2/src/library/methods' dumping R code in package 'methods' Error in eval(expr, envir, enclos) : couldn't find function "character" Execution halted make[3]: *** [../../../library/methods/R/all.rda]

I had very good success going from RH9 to Centos3 via yum, with almost no pain. I changed to the centos-release package, updated yum and rpm, and then as I recall there was maybe one dependency problem, solved by removing the offending package and adding it back in again after the upgrade. This was a server machine, though, without much extra stuff or extensions beyond the normal distribution,

I have got it working such that wbinfo -u and wbinfo -g both report the users and groups on the AD server - however, what they dont show is the domain (as per 9.3.3 in Samba3 by example) can anyone offer any suggestions ? Also the getent passwd and getent group are not showing the domain details only local machine details. many thanks for any help ian

--/aVve/J9H4Wl5yVO Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Content-Transfer-Encoding: quoted-printable Hi! I've finally managed to install a RedHat 7.3, RedHat 9 and Conectiva 9 on one of my development boxes. This provided the opportunity to build some 'official' iptables-1.2.8 and ulogd-1.0.0 RPM's for the respective distributions. You can get

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: ast-output Type: application/octet-stream Size: 4024 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20030416/01fd81aa/ast-output.obj