similar to: No subject

Hi Erick, what was the value of 'si' in top ? Best Regards, Strahil Nikolov ?? 3 ??? 2020 ?. 18:48:30 GMT+03:00, Erick Perez - Quadrian Enterprises <eperez at quadrianweb.com> ??????: >It was found that the software NIC team created in Centos was having >issues due to a failing network cable. The team was going berserk with >up/down changes. > > >On Fri, Jul 3,

On May 3, 2020 8:33:33 AM GMT+03:00, Erick Perez - Quadrian Enterprises <eperez at quadrianweb.com> wrote: >sorry corrections: >For this test I created a 40GB lvm volume group with /dev/sdb and >/dev/sdc >then a 40GB LV >then a 60GB VDO vol (for testing purposes) > >vdostats --verbose /dev/mapper/vdoas | grep -B6 'saving percent' >output from just created

Sure did! I am even playing with different options (including NONE) and it seems to ignore the contents of ssl.conf I have tried Environment=G_TLS_GNUTLS_PRIORITY=NORMAL:+TLS1.2:!TLS1.1:!TLS1.0:!ECDHE-RSA-AES256-SHA: Environment=G_TLS_GNUTLS_PRIORITY=NORMAL:+TLS1.2:!TLS1.1:!TLS1.0:!ECDHE-RSA-AES256-SHA Environment=G_TLS_GNUTLS_PRIORITY=PFS

It was found that the software NIC team created in Centos was having issues due to a failing network cable. The team was going berserk with up/down changes. On Fri, Jul 3, 2020 at 10:12 AM Erick Perez - Quadrian Enterprises < eperez at quadrianweb.com> wrote: > Hey! > I have a strange condition in one of the servers that I don't where to > start looking. > I login to the

I usually use the command "dd if=iso of=usbdevice status=progress && sync" On Wed, 29 Jan 2020, 18:36 Erick Perez - Quadrian Enterprises, < eperez at quadrianweb.com> wrote: > That happened to me several times > My USB was "burned" and never displayed new data copied to it. > By "burned" I mean the flash drive was faulty up to a point where

Hi team, I'm dealing with AS/U as a member server on a Samba 3.0.20 PDC. Jonction seems ok, and from the member server I can see PDC's shares (with net view) and authenticate user (with net logon user passwd /domain:domainname). On the other side, I fell into timeout when running smbclient -L member from the PDC. Here is a log.nmbd loglevel 10 from PDC as there is no other log

If you have the need to implement 5 asterisk boxes each one handling only 100 ulaw calls (same dialplan,etc.) logging to a six MYSQL server , what do you use in *front* of the asterisks? Codecs, hardware,etc is not important. The thing that Im trying to figure out is how do I present the asterisk servers to a bunch of phones and/or FXStoSIP boxes. a sip proxy is not the solution because the sip

When is supposed to be released the Zimbra+Asterisk version? -- ------------------------------------------------------------ Erick Perez Panama Sistemas Integradores de Telefonia IP y Soluciones Para Centros de Datos Panama, Republica de Panama Cel Panama. +(507) 6694-4780 mailto: eaperezh@gmail.com mailto: eperez@ptysystems.com ------------------------------------------------------------

Hi. I got this email-address from BUGS.txt file of the samba distribution. I read it carefully. I got configured and working samba, I work with samba above one year. I still have a problem, and, according to the samba log output, I think it's probably a bug. When I try to use the shares with audit support, I have my Far disconnected and telling me that something is wrong. I have that

Hi, I tried to find a reference in terms of size but got back a bunch of tech documents and couldn't get the idea of wav49 format. wav49 format is supposed to be half the size of a normal wav right? so, how much disk space takes to save one minute of audio in wav49? I trying to do some capacity planning for a voicemail server. -- ------------------------------------------------------------

On Dec 27, 2019, at 16:28, Erick Perez - Quadrian Enterprises <eperez at quadrianweb.com> wrote: > > [root at cockpit ~]# cat /etc/systemd/system/cockpit.service.d/ssl.conf > Environment=G_TLS_GNUTLS_PRIORITY=NORMAL:-VERS-SSL3.0:-VERS-TLS1.0:-VERS-TLS1.1 > > [root at cockpit ~]# > [root at cockpit ~]# systemctl start cockpit > [root at cockpit ~]# systemctl status

To all those that wanted to know how I was filtering particular ICMP packets here is a few snippets from my firewall script which is based on one by Ian Hall-Beyer. I hope this helps you get started. Also note the output of the command: ipchains -h icmp Shawn Mitchell mentioned blocking all ICMP echos and especially broadcast echos. Perhaps he''d care to elaborate with a similar

sorry corrections: For this test I created a 40GB lvm volume group with /dev/sdb and /dev/sdc then a 40GB LV then a 60GB VDO vol (for testing purposes) vdostats --verbose /dev/mapper/vdoas | grep -B6 'saving percent' output from just created vdoas [root at localhost ~]# vdostats --verbose /dev/mapper/vdoas | grep -B6 'saving percent' physical blocks : 10483712

Hello Everyone, I am relatively new to linux and Samba and I am having some difficulties setting Samba up as a Primary Domain Controller. Ihave read the Pdf document called "Using Samba as a PDC" by developrWorks and I have read most of the Howto documents relating to Samba. When I try to connect to my samba server with Win98se I get the message "no Domain server was able to

Thanks, Randal for the response. But it did not work. Here the results: #yum info cockpit Name : cockpit Arch : x86_64 Version : 195.1 Release : 1.el7.centos.0.1 Size : 51 k Repo : installed >From repo : extras Summary : Web Console for Linux servers URL : https://cockpit-project.org/ License : LGPLv2+ [root at cockpit ~]# cat

I have a lot of this errors in my Centos stock 4.3 version in an Intel D945gnt motherboard with a Pentium D (dual core) If I disable apic in the grub.conf (apic=off) will I get a performance hit? Im running Asterisk on that machine. 40 is Received Illegal Vector 20 is Send Illegal Vector 60 means you're getting both errors at the same time. Basically it means that the APIC bus messages are

I managed to get NFS statistics just before server rebooted. I can reproduce this every time. Question: Am I saturating the SATA bus on the NFS server so violently with the SSDs that the server hard reboots? Perhaps due to the RAID 6 nature of operations? Server info AMD EPYC 7281 16CORE 32 GIG RAM 6xSATA3 SSD 1.9TB in mdadm RAID6 OS: Centos 7.6 SATA controller: Advanced Micro Devices, Inc.

Hi, I have joined a RedHat-7.1 box with Samba 2.2.2 to a NT Domain, and everything works perfect. Except when I look in de log file I see a name query error every 5 minutes , and I don't know how to solve this problem. The PDC-A is de primary domain controller and tux is the linux box with samba. I made u tcpdump on the same moment when I receive the error and it seems that the NT box sends

Hi Tinc Mailing-Group, I am a bit stuck with firewalling rules at the moment. Maybe someone could please advise me a good rc.firewall script to use on my setup. If anyone runs an ipchains firewall script on their linux box which is ALSO running tinc, could they please mail it to me, for my perusal. I have tinc pre3 set up and working on my systems, however I can only get it to work if I set the

Hi folks... I'm configuring Firewall in the server running Conectiva Linux 6.0 (Brazil) and I already configured to accept connections in the ports: netbios-ns 137/tcp # NETBIOS Name Service netbios-ns 137/udp netbios-dgm 138/tcp # NETBIOS Datagram Service netbios-dgm 138/udp netbios-ssn 139/tcp