similar to: No subject

When I try to make a copy the folder with the GIF files using Windows, the countdown says it will take roughly half an hour (I didn't actually go through with it). If I do the same using cp -r from the Linux box, it takes roughly 2 seconds. I checked top and vmstat and neither seemed to show anything unusual - in fact, Samba had pretty negligible CPU usage. The hard drive array is SCSI,

are being offered by the server. You can check also what shares are being offered by the windows boxes the same way. I wonder why the other windows machines are not showing up in network neighborhood? Try sharing some things between windows machines. Maybe you have something misconfigured on the windows side. There is a script, findsmb, which comes with samba. First turn off nmbd (killall nmbd) ,

This is... odd. Got a 6.8 box, a Dell R320 lspci tells me 01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2008 [Falcon] (rev 03) so it *should* accept an SAS drive. I've got a Cheetah that's a few years old, and having pulled it out of another server (in the datecenter), I put it in this box to zero it out for reuse... and the box refuses to see the drive. *Nothing* in

Hello all, I have really strange problem with Samba 4.1.0 - regarding only one user - Administrator. There are 2 servers: NAS (which is DC) and CHEETAH (Which is domain member). Have spent long time in efforts to sync UID/GID across servers (these are used both from Linux over NFS and from Windows) - and finally wrote the scripts to make all users/groups (even including the builtin one, like

On 7/26/2016 2:38 PM, Peter wrote: > On 27/07/16 09:11,m.roth at 5-cent.us wrote: >> >This is... odd. Got a 6.8 box, a Dell R320 lspci tells me >> >01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2008 >> >[Falcon] (rev 03) >> >so it*should* accept an SAS drive. I've got a Cheetah that's a few years >> >old, and having

I meant to send this to the list but evidently only sent it to David. Since sending it I've done a second test which shows what a successful snmpset looks like. First attachment, from the forwarded email, is nutout.txt. Second attachment is snmpout.txt. nomad -------- Forwarded Message -------- Subject: Re: [Nut-upsuser] [EXTERNAL] SNMP shutdown timing out Date: Mon, 4 May 2020 09:28:57

As I said though, there's no lost ICMP packets, even when the IPSec tunnel drops out. I do notice a lot of these errors in the secure log though, would this be any indication of a problem? (I'm grepping for this specific error, they're not the only messages in there). Feb 11 14:18:10 site-a pluto[10450]: "site-b/1x1" #803: ignoring Delete SA payload: PROTO_IPSEC_ESP

Morning all ... I saw the previous thread, and ignorantly didn't follow it ... and now I can't seem to find it in the archives to go through it now that its hit me ... This morning, after 5 days of uptime, my server got hit with: Jun 6 09:52:19 pluto /kernel: fxp0: device timeout Jun 6 09:52:19 pluto /kernel: fxp0: SCB timeout: 0x60 0x0 0x0 0x800 Jun 6 09:52:19 pluto /kernel:

Hey All, I don't know what's wrong, or what I may have done wrong, but I THOUGHT I followed all the correct steps to setup samba, and it's not working. Here's what I did: D/L latest samba code (4.13.1) & extract install dependencies ./configure --prefix=/usr/local --enable-fhs (enable-fhs was required to get configure to run through completely) make make install cp

Hi all, Still looking for the best way to achieve consistent GID/UID mapping on Linux servers/clients, in heterogeneous environment (Linux, Windows, CIFS, NFS). Current problems with UID/GID resolution prevents from using Samba4 in environment with backups (where data may be restored on another server) and mixed Linux/Windows workstations. Just recently installed fresh Samba 4.1.0 on the server

Hi. Has anyone ran into issues with the timing of page.delay. I have been testing in firefox, for the most part, and it seems that there is no reliability on when the page.delay timings kick in. What happens is that sometimes it will work fine, and the countdown looks great; other times it will just jump to the end and display everything at once, other times it will be jerky. I''m on a

Hello, I'm having a bit of trouble connecting our current CentOS Openswan server with a Vyos server via IPSec. I've posted this on the VyOS forums, but haven't had many helpful responses, so I thought I would ask here. http://forum.vyos.net/showthread.php?tid=26504&pid=29703#pid29703 Basically our Openswan configuration is as follows: conn VYOS keyingtries=0

hi, I can''t get a freeswan 2.02 ipsec x509 connection at work can somebody help me? ************************************************************************************* global situation ************************************************************************************* the linux gateway (chivas) is a single machine 192.168.1.250 with a local net 192.168.1.0/24, a dyn IP via a DSL

I have an external HP SureStore DLT VS80 with a SCSI LVD 68 pin interface and an external HP SureStore DAT24 with a SCSI Centronics 50 pin Narrow SE interface. The cable for the DAT has a Centronics connector at one end and a 68 Pin Wide to Narrow terminated connector at the other. The cable for the DLT has a LVD/SE 68 pin connector at both ends. I have terminator blocks for both devices.

On 27/07/16 09:11, m.roth at 5-cent.us wrote: > This is... odd. Got a 6.8 box, a Dell R320 lspci tells me > 01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 2008 > [Falcon] (rev 03) > so it *should* accept an SAS drive. I've got a Cheetah that's a few years > old, and having pulled it out of another server (in the datecenter), I put > it in this box to

John R Pierce wrote: > On 7/26/2016 2:38 PM, Peter wrote: >> On 27/07/16 09:11,m.roth at 5-cent.us wrote: >>> >This is... odd. Got a 6.8 box, a Dell R320 lspci tells me >>> >01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS >>> 2008 [Falcon] (rev 03) >>> >so it*should* accept an SAS drive. I've got a Cheetah that's a

Does anyone else noticed problems after updating openswan to openswan-2.6.32-27.2.el6_5.i686 ? In our case a connection to Cisco VPN 3000 Series would no longer work. I can see in the log an ASSERTION FAILED error and the connection would remain in Pending phase 2. Mar 7 16:24:40 firewall pluto[7647]: "ciscovpntest" #2: discarding duplicate packet; already STATE_MAIN_I1 Mar 7

Hi there, I hope this is the right list. I have been trying to cross compile the LLVM 3.2 for our x86 target by using i586 cross compiler provided by Oselas toolchain (http://www.pengutronix.de/oselas/toolchain/index_de.html). I have cross-compiled multitudes of 3rd party projects before and usually I can apply similar methods to compile the most of them. I have however not been able to figure

Hello R users, This is more of a convenience question that I hope others might find useful if there is a better answer. I work with large datasets that requires multiple parsing stages for different analysis. For example, compare group 3 vs. group 4. A more complicated comparison would be time B in group 3 of group L with B in group 4 of group L. I normally subset each group with the

Try setting lower keyexpiry time on other endpoint. -- Eero 2016-02-09 17:04 GMT+02:00 John Cenile <jcenile1983 at gmail.com>: > Hello, > > I'm cross posting this from the OpenSwan mailing list, in case someone here > can help. > > We have two sites connected via OpenSwan 2.6.32-9 on CentOS 5, sharing 6 > /24 subnets each (so 12 in total). > > The problem