similar to: No subject

The samba configuration on the local LAN works great but, I am trying to set up samba to permit browsing of two workgroups on different subnets and getting very close but not quite the results I want. Remote shares can be mapped to a local drive using "net use * \\remotehost\remoteshare" but in windows explorer the remote workgroup is not browsable : there is a "computer could not

Many thanks to all the Samba fans for your ideas and suggestions. Eventually all the indicators pointed at a W95 client that was (somehow) selectively working with everything except Samba. I took out my W95 repair tools (fdisk & format) and after a new install (and setting the registry to use plaintext passwords) everything worked fine. When I also re-installed all the other M$ patches,

Is this stretching the limits of what Samba was designed to do? I have set up a VPN with 2 LANs (I'll call them EastLAN and WestLAN) interconnected through the internet. On EastLAN there is a samba server configured to be the domain master browser as well as the WINS server. PCs connected to this LAN are Win9X and are all in the workgroup EAST. On the WestLAN there is a samba server

I am still trying to make samba work over a WAN with multiple workgroups although I am just about to throw in the towel. I had hoped to find a solution that would permit a Windows PC to browse a (MS) workgroup (ie retrieve the browse list from the workgroup master browser for a remote (MS) workgroup when that MB is NOT a samba server). Since WINS only provides the broadcast address of the remote

When doing the 5.2 installation the ONLY drive option provided is mapper/nvidia_cbjcdhfe (250G) My system has 2 SATA - 250G drives and I want to use them in a RAID/LVM configuration. My question: How do I get the installer to let me use DiskDruid to create RAID1 arrays and then use LVM for the mount points? What I've done so far: I've verified that both drives are recognized by

[andy@fw andy]$ echo "hello" | telnet 192.168.4.1 139 Trying 192.168.4.1... Connected to 192.168.4.1. Escape character is '^]'. Connection closed by foreign host. [andy@fw andy]$ echo "hello" | telnet 64.218.*.* Trying 64.218.*.*... Connected to 64.218.*.*. Escape character is '^]'. Connection closed by foreign host. [andy@fw andy]$ Originally I got one of the

Is it possible to browse multiple workgroups on two or more subnets? I have set up samba on either end of a VPN and can browse successfully from either end, but only in the workgroup that samba is configured for. Can Samba be a member of more than one workgroup at the same time? Looking in browse.dat I can see all the machines in samba's workgroup and also the other workgroups, but not the

I've been burned by Sata not working on an Asus motherboard (nVidia / nForce) and need to select something that will work for a fairly light duty web/mail/sql server. How do I go about finding out if a specific motherboard will work with sata software raid and Centos 4.4 (or 5.x when it's settled down). Cheers; Alex V. -- This message has been scanned for viruses and dangerous

I have a RH 7.2 PDC which uses DHCP for 2 machines on the network. My Win9x machine as a client/BDC just in case and uses a static IP. If the PDC goes down. I have to put in or take out the PDC's gateway IP and was wondering if there was a way to get ONLY the info I need from DHCP to the Win machine. To attempt to clarify, when the PDC is up, it will assign its gateway IP to the BDC (since it

Hello I'm using mfcr2 support (unicall) in asterisk 1.4. Everything is working fine, asterisk can answer calls. But after some random period of time mfcr2 module stuck. When I make a call to my * box I can hear only signal of getting caller ID ("tritirirti" - like jumping on :) ) and connection is terminated by my telecom operator. When everything I ok after few seconds of this

Hi. I am in the Brazil. I have a problem on Unicall for Asterisk 1.4. I am working with E1 with 30 channels. Message when it receives calls: chan_unicall.c:2603 handle_uc_event:unicall/1 protocol error.cause 32772. My files: /etc/zaptel.conf: span=1,1,0,cas,hdb3 cas=1-15:1101 cas=17-31:1101 loadzone = br defaultzone = br fxoks = 32-55 /etc/asterisk/unicall.conf: [Channels] language=br

Found nmbd down with this in the log; [2001/02/27 19:21:36, 0] libsmb/nmblib.c:send_udp(755) Packet send failed to 192.168.113.255(138) ERRNO=Network is unreachable [2001/02/27 19:21:36, 0] libsmb/nmblib.c:send_udp(755) Packet send failed to 192.168.22.255(138) ERRNO=Network is unreachable [2001/02/27 19:22:18, 0] libsmb/nmblib.c:send_udp(755) Packet send failed to 192.168.3.1(137) ERRNO=Network

Hi, I connected a multi-homed Win95 machine (carrot, see below) to two networks (ankh-net and morpork-net) which a multi-homed Linux machine running Samba 1.9.18p10 (or whatever the latest <2 is) was also connected to (vimes) and wanted to see which of the two interfaces Win95 would pick... --------------------------------- ankh-net 134.225.241.0/24 | |

When the world was young, Ole Holm Nielsen carved some runes like this: > Date: Fri, 20 Nov 1998 12:03:59 +0100 > From: Ole Holm Nielsen <Ole.H.Nielsen@fysik.dtu.dk> > Subject: Re: Dial in accounts > Regarding remote network browsing: > We have had mixed success browsing Network Neighborhood from > PPP-connected Win95 PCs. Our servers are all SAMBA, no NT here :-)

-----BEGIN PGP SIGNED MESSAGE----- Hi, I've checked the archives, and didn't see anything relating to this: I have a RH 6.1 fileserver running Samba (latest update from RH). I have 3 computer plus a laptop on this network, all properly accessing the Samba shares. The IP address for all of these systems are statically assigned. Also, all of these systems automatically restore a file

Hello guys, I'm at my wits end.. hope someone can help.. this is the deal. I have setup a linux box to serve as a "gateway" for our internal lan. Running 2.0.34 slakware. I have 2 nic cards.. One for our "internal" lan (192.168.2.0) and the "external" lan..I have gotten the OS to see both of them, but when trying to get DHCP to work with both, it kept barfing..

I can only conclude that Samba is an elaborate hoax and here's why. 1) Setup is more complex than Sendmail (it set the standard for complexity) 2) Even the simplest smb.conf causes trouble 3) You can pass ALL the tests in the DIAGNOSIS procedure, AND Samba will still not let you SHARE FILES or SHARE PRINTERS between Windows and Unix but you WILL be able to BROWSE YOUR SHARES (Just pretend

Has anyone been able to do domain logins via a PPP link? If so, how? I am running FreeBSD 3.2. I have 2 network interface cards on the machine, one to the internet, one to my local network. I am running ipfw (firewall support), as well as nat (network address translation). I have a ppp link which I am able to connect to. Once connected via ppp, I can ping/ftp/telnet to any machine on my

google for "centos error performing checksum" refers to createrepo but of course "yum install createrepo" also fails and the instructions appear to be overkill. Is there a "simple" soultion? here's the result of yum update: # yum -v update Loading "fastestmirror" plugin Config time: 0.118 Yum Version: 3.2.22 Setting up Package Sacks Loading mirror

Hello ! I have a problem of syncing browse lists between DMB and LMB. The topology of ours network is as follows: Linux Network comma(Linux, DMB, WINS) vol(Linux) door(Linux, LMB) | | | | | | | | | --------------(195.226.226.16/28)------ | | | | | | | --(local net