similar to: samba process dead

Hi! I am having trouble with a samba server version 2.2.5 on SuSe 8.1. Very often my samba processes get to state D and can't be killed anymore. The clients seem to continue to connect and so I get even more dead samba processes. These processes can't be killed, all I can do is reboot the machine. I have looked on the internet, quite a few posts regarding that problem, but no real

Hi! I have the following problem when connecting to samba servers from XP and Win2000 clients: On the first connect to the linux box within the Windows Explorer with e.g. \\mycomputer it is listed in the group "Unknown". If I close the Explorer and open up again it is listed in the correct group with all the other windows- and linux-pcs. I am using samba version 2.2.5 Does this work in

Sorry if this is such a basic question but I couldn't find anything about this in the FAQs/HowTos/Digest. I've compiled samba-1.9.18p3 on SunOS4.1.3_U1. When I tried to run smbd via inetd.conf (SIGHUP), I always get the following on the console. inetd[590]: netbios-ssn/tcp: unknown service I've edited the /etc/services to add: netbios-ssn 139/tcp And the /etc/inetd/conf with

Greetings all, See below for postinstall and remove scripts for the above release for those who may have wondered why they didn't work. Minor changes, but those below work. Find these scripts in ../samba-1.9.18p10/packaging/Solaris/pkg-specs. Regards Anthnoy :::::::::::::: postinstall :::::::::::::: #!/bin/sh # install samba nawk '/^netbios-[ns]*[ ]/ {next} {print} END { print

I'm trying to start SAMBA from the inetd. I have added the port numbers to /etc/services: netbios-ns 137/udp netbios-ssn 139/tcp To my inetd.conf I have added: netbios-ssn stream tcp nowait root /usr/local/samba/bin/smbd netbios-ns dgram udp wait root /usr/local/samba/bin/nmbd After this I killed any samba-prosecces, and refreshed the inetd with:

I am getting errors when I try to start smbd which say that port 445 is already in use, but nothing else is using it. In the log, the full error is: -----start log.smbd---- [2004/02/02 11:03:53, 0] lib/util_sock.c:open_socket_in(662) bind failed on port 445 socket_addr = 0.0.0.0. Error = Address already in use ------end log.smbd----- In my /etc/services file, I have these entries:

I'm currently running version 2.0.7 of samba(CIFS9000). I have HPUX 11.x installed on the samba server. When I try to run this from inetd it doesn't work. I can run a startup script that runs the smbd as a daemon and it works fine. But if I try to run it from inetd it won't start. The previous version of Samba 1.9.18p10 that I had on this server worked fine. Is this a bug in

Hi, I have a problem in accessing samba server from NT network neighbourhood. I can see the samba server icon on neighbourhood. But while trying to access then it's asking for user name & passowrd. I am not using local user & password from unix box rather it should be authenticated from NT PDC and accordingly I have modified the smb.conf file. Here is the sample of that. 103 flara %

Hello List, does anyone have also problems with Samba, OpenLDAP and RaiserFS? We have a LDAP on three servers and only the one who runs under RaiserFS crashed every week. Whats your opinion? matze

I have tried to set up Samba on my Solaris 2.5.1 with 2 interfaces (le0, le0:1 - one network card with two IP addresses). But all I could see is throught the default ports 137 and 139. In my /etc/inetd.conf, I have: netbios-ns dgram udp wait root /opt/samba/bin/nmbd nmbd -s/opt/samba/lib/kes.smb.conf netbios-ssn stream tcp nowait root /opt/samba/bin/smbd smbd -s/opt/samba/lib/kes.smb.conf

Hello Guys, First off let me say thanks for your efforts on Samba. Next I have a problem, I dled the samba 2.2.2 tarball and installed it and now I am at the configuration stage. It says I have to add two lines netbios-ssn lines to the inetd.conf file. Well, unfortunately there is no inetd.conf. However there is an xinetd.conf file is that the same thing and if so, what and where do I

Help me ! I cannot start smbd, it immediatly stops, I've got in my log.smb [1999/05/19 14:53:43, 0] lib/util_sock.c:open_socket_in(709) bind failed on port 139 socket_addr=0.0.0.0 (Adresse déja utilisée.) And then It stops, I cannot launch smbd. I my /etc/services, I've got the two lines : netbios-ssn 139/tcp netbios-ns 137/upd and in /etc/inetd.conf netbios-ssn stream tcp

Dear list; I have been using samba 1.9.18p10 on a Sun Sparc Ultra 2 for about a year. I use it to share a directory to an NT/95 network. I now have a Sun Sparc Ultra 10 running Solaris 2.6. In order to prepare the Ultra 10 for y2k I downloaded samba-2.0.6-nonis+-sparc-sun-solaris2.6.pkg.gz from

Hi, I tried to map solaris to PC running 3.1 or 3.11 or so. That PC sees another solaris as it is mapped to it. No problem there. But to map to it the new solaris 5.7 system with latest samba i get "receiving computer is not responding". I did "ps -aef|grep smbd" and see it not running. nmbd is running. I followd the instructions as follows ans I see no smbd running. nmbd is

I have the default installation of samba (2.0.5) that came with Caldera OL 2.3, but it doesn't seem to be starting up properly, nor is SWAT working. When I run the script 'samba start', I get the message "Starting samba: smbd nmbd", but when I check the running processes, only nmbd shows up. Running smbstatus gives me the message "Couldn't open status file

Hi, Samba world: It is my first time to use samba to share a folder from a solaris 7 to our windows 2000 clients. After I have the following, I could not see the unix share point. Your help is highly appreciated! 1) Install samba 2.0.5. 2) done the following: Edit /etc/services and make the following changes. Immediately after the line which reads: sunrpc 111/tcp rpcbind

Hi, For no particular reason, my Samba service didn't start yesterday, when I went to start it by going in the /usr/local/samba/sbin and then typing SMBD I got an error "permission denied" and something about the port 139 (sorry I don't have the whole error message) No changes were made on the box. I started looking over the web and I found an something out something to

I've been running Samba3.0.21a on two AIX5.3 servers for several weeks with no major problems. Today, one of the servers stopped working. I received the following message from Windows when I tried to access one of the share drives: An error occurred while reconnecting T: to \\wara01\TSMreports Microsoft Windows Network: This local device name is already in use This connection has not

Hello, I'd like to see if I can get some clarification on what is the preferred method of starting the Samba daemons (note that we are using Solaris, not Linux). This is something that I'm not able to find any explanation of in any of the Samba 3 documentation that I've looked at so far. In Samba 2 I would have the Samba daemons started up by the following in my /etc/inetd.conf:

Hello, don't know if this behavior is a bug, but I want to share this information. samba server version 3.4.3 is installed on solaris10 x86 compiled with gcc Reading specs from /usr/sfw/lib/gcc/i386-pc-solaris2.10/3.4.3/specs Configured with: /builds/sfw10-gate/usr/src/cmd/gcc/gcc-3.4.3/configure --prefix=/usr/sfw --with-as=/usr/sfw/bin/gas --with-gnu-as --with-ld=/usr/ccs/bin/ld