Displaying 20 results from an estimated 1000 matches similar to: "2k and 9x connect and print, XP won't"
2003 Nov 24
3
Samba 3.0.1 from samba.org shows "bgmilne" as username
When I attempted to "rpm -i samba3-3.0.0-1.1mdk.src.rpm" this morning on
my Mandrake 9.2 box, I got an unusual message that doesn't make sense.
It said, over and over (thirteen times total):
WARNING: user bgmilne does not exist - using root
When it went back to root prompt, I did an "updatedb", but nothing for
"samba-3" is found when I did the urpmi request.
2003 Nov 24
2
Is Samba 3 stable for Mandrake 9.2?
Not to be the annoying child, but I have found myself uniquely annoyed
that I can't update RPMs that include Samba 3, and I'm not certain if
that's because it's even ready for Mandrake 9.2. Does anyone have a
bead on this? Should I just go back to 2.2.8 and wait for the stable,
or can someone point out a URL that has a stable 3.0 on it?
Thanks
Eric
2003 Dec 01
2
Samba 2.2.8 doesn't allow to write to group share
Two issues, and I'll discuss them both:
I created on my NT4 domain a group called "branch99". They're a "local
group" as far as NT is concerned, and it has two members; myself, and
another fellow down the hall. My end quest is to create a share on a
Mandrake 9.2 box running Samba 2.2.8, and have it permit or deny file
access based on NT's typical discretions.
2003 Dec 12
0
CHMODded group directories don't keep their attributes
I have Samba 2.2.8 on Mandrake 9.2, and have successfully been able to
create a folder that grants browse and write permissions to an NT group.
But I had to go about it the weird way; after I proved that this user
could browse the share (and that a person not in the group couldn't), I
noticed that my group member couldn't write to the share. I
experimented with different CHMOD things, and
2003 Nov 21
3
Which Linux best suits Samba3?
In a discussion with one of the main answer people, of whose time I am
greatly appreciative, it was suggested that some of my problem (or
solution) may be to run Samba on a distro that's better suited for it.
Problem is, I don't have the time nor the inclination to download a
bunch of distros just to install, test, fdisk, repeat.
So I ask. what is a recommended recent distro that works
2003 Oct 24
2
EU Linux migration document. -- German Gvt. "Migration Guide"
> Linux migration document.
>
> * To: samba at sambadotorg, samba-technical at sambadotorg
> * Subject: Linux migration document.
> * From: Jeremy Allison <jra at sambadotorg>
> * Date: Tue, 21 Oct 2003 23:20:58 +0000
> * Cc: jra at sambadotorg
>
> Hi all,
>
> If you're looking at a Windows server to Linux & Samba migration
2003 Oct 23
5
samba 2.27 as print server
I'm running Samba 2.27 on RH8 system. I've got samba as the print
spooler for Windows XP clients and using winbind as the user validation
against my Win2K DC. Permissions on the spool directory are root root
with the sticky bit on. Clients can delete their own jobs from the que,
but the spool directory is not being expunged of print jobs and the last
job constantly displays in the client
2003 Nov 18
2
Printerassistent.
Hi there,
Ok. My last postings about my problems with printerinstalation over
controlpanel were
still not answered.
So maybe I have to ask my question in an other way.
Is someone able to install a printer shared by Samba 3/Samba pre3 x over
the controlpanel?
I can't. I can't see my Server. I can see the Domain name and I can see
other clients wich belong
to the domain.
I can see all and
2003 Oct 22
4
samba3 and cups printserver
Hello,
I've got an rh9 box which i am using for printing. I've got cups
configured and my printer is working fine. Originally, i intended to use
samba 2.2.x for printing, but then i saw that 3.0 was out so i installed
it's rpm instead. My first of many questions, for printing to work
correctly, samba and cups, what must be specified in terms of the
printing line in smb.conf, bsd or
2003 Nov 13
1
Accessing shares through XP on an NT4 domain
Hello!
I have a Mandrake 9.1 box running Samba 2.2.7 (not ready to upgrade
yet). Using both Swat and vim-ing the smb.conf file (and restarting
after every change, just to see), I've finally gotten back to where I
was yesterday, which is for my XP computer to be able to see the
Mandrake box.
Problem is, I have to type in the IP address of the box. For whatever
reason, it doesn't show up
2004 Mar 01
1
OT - What are these crazy messages?
I'm just dying to know what the origin of these messages with the txt
attachments is. I get quite a few here, and even some in other mailing
lists. But they're all unique; the attachment filename starts with ATT
(followed by four or five digits), and are 192 bytes long. The senders
are often different.
Anyone got a bead on this?
Eric
2003 Nov 17
1
Changing SWAT port or removing 2.2.7
Some of you have already read about my newbie fortune with this Samba3
install. Thanks to those who answered my original questions.
Now I have something which I know is probably academic, and perhaps
still newbie-related. When I installed Samba3 on Friday, it took me a
little while to figure out that my names required adding a 3 to the end
(SWAT3, SAMBA3, TESTPARM3, et al). I did not uninstall
2003 Oct 28
1
print job complete messages
I know I've read something about this in the distant past, but i can't seem to
find any info on it now. I'm hoping someone knows offhand...
I'm using samba 2.2.8a and cups 1.1.17 to serve printing to some windows 2000
workstations. Cups is set up with raw queues and I'm using the windows
drivers available from HP. When the clients print from the windows print
server,
2003 Nov 20
1
Samba 3 multible deamons running
Hi there
something strange is going on on my server. Everytime when i am on a samba
share the server starts another smbd but i dont want that this happens! Can i
turn that of in the config or is this an issue?
With kind regards Ben
--
GMX Weihnachts-Special: Seychellen-Traumreise zu gewinnen!
Rentier entlaufen. Finden Sie Rudolph! Als Belohnung winken
tolle Preise.
2003 Nov 11
1
Guest Account - don't enter a password
Hello,
I am using samba 2.07-36 on a RedHat 7.1 linux system. I want to share a
directory on my Linux system to various Windows operating systems (Windows
95, 98, 2000 etc).
In the shares definition section I have:
[MyShareDir]
comment=My Shared Directoy on my Linux system
path= /home/john
public = yes
writable = yes
printable = no
create mode = 0664
directory mask = 0775
2003 Oct 25
3
samba3, cups, and pointprint drivers install
Hello,
I've got a redhat9 system with cups and samba3 installed. I want to use
this machine for both local and network printing. On the local side apps
can print just fine, the cups configuration is working great.
Network-side is not the case. I've got a mixture of 2k and 9x clients, so
i'm going to need drivers for both configurations. In smb.conf i've got:
printcap name = cups
2003 Nov 20
2
simple question concerning update 2.2.8 to 3
Hi,
we run a RH 9 Server with samba 2.2.8 as a PDC. Win 2K/XP Clients can
log in without a problem, logonscripts work fine.
Now I'd like to update to Fedoroa Core 1 with Samba 3.0.0.
I have read the update chapter of the "The Official Samba-3 HOWTO", but
have the simple questions:
will the new samba server work "out of the box" with the "old"
configuration,
2003 Nov 12
2
problems with cupsaddsmb
Hi!
I'm using Suse 9.0 with cups 1.1.19 and Samba 3.0. I'm trying to share
my printer on the network. Testparm runs without errors and I can see my
printer in the network neighborhood. So the smb.conf should be fine.
But when I try to install the driver with cupsaddsmb I get the following
error.
zwobot:/usr/sbin # ./cupsaddsmb -U root -a -v
Password for root required to access
2003 Oct 24
1
Printing from Win2000
Hello,
I have just started using samba a couple of weeks ago. I am using
Slackware 9.1 and windows 2000. i can see everything. on my windows box i
can see my linux box and visa versa. but i have a HP deskjet 932c on my
linux box and i want to be able to print from windows. windows can see the
printer in network neighborhood but it says that it is unable to connect
access denied. i
2003 Nov 19
3
Samba 3.0 and the HP PSC 750 printer (printing over cups)
hi all,
i have samba 3.0 on a fedora-linux running. almost everyting works fine,
except one printer, my hp psc 750 (connected via usb) is not printing via
samba.
I get pages printed (via cups or whatever) if i print from the localhost.
So, here a few data from my smb.conf:
printcap name = cups
printing = cups
load printers = yes
[printers]
comment = All Printers
path =