similar to: (no subject)

On Mon, Dec 8, 2014 at 10:44 AM, Leenders, Peter <Peter.Leenders at computacenter.com> wrote: > This look promising, if I could separate the config files for the different > boot architectures Bios and UEFI. I have 2 different boot files in 2 > different locations, but after startup they both refer to the > tftproot/pxlinux.cfg/default config file. The DHCP Option 209 may solve

Hi all, Do any of you have any ideas for getting a DOS floppy to reboot to the hard drive (which may contain Windows 98 or XP or Linux or Novell etc etc)? I want to use syslinux, but it does not support the localboot option like pxelinux and isolinux do. Basically, I want to boot DOS from a floppy, run some DOS stuff, then reboot to the hard drive while leaving the floppy disk in the drive.

Hi Folks! I try to send a popup via "smbclient -M" from a sun (SunOS 5.8, Samba 2.0.7, hostname "sonne") to a WinXP (hostname "dezntmneubeck_x") but it fails. Both machines are in the same physical network. All I get are the following lines: root@sonne(1017)/> smbclient -s /usr/local/samba/lib/smb.conf -M dezntmneubeck_x added interface ip=193.102.105.71

Hi, I have some strange problems with 3.0a21 PDC (samba and nss use both ldap) and I can't find any good help with google... One strange thing is that logon script does'nt work anymore, it worked at one point and now doesnt (I quite play around here and I dont know in which point of changing smb.conf it stopped to work). [netlogon] share is like that: [netlogon] comment = Network

I'm setting up a samba primary domain controller in Debian woody and the users are logging into the domain fine and can access their shares. I would like to restrict the listings of available shares to only authenticated users of the samba domain. I know this works in a win NT4 domain, how does one do it with samba? This is the listing I get from an nt4 pdc (belongs to a different domain than

Hi, I am preparing to get our Data Center from a Samba 3.5 NT4 domain to AD. All users, file ownerships, etc. have to remain of course. I am planning to use Samba 4.7.x, but I was wondering if it is possible to eventually transition to Windows Server 2016 as the only DC hosts. The way I understand it is that this is not possible right now, because Samba doesn't support that schema version

Small sidenote in regards to the wiki, there is also an V6 since windows 10 aniversary. https://technet.microsoft.com/en-us/library/jj649079%28v=ws.11%29.aspx Am 03.05.2017 um 09:52 schrieb Rowland Penny via samba: > On Wed, 3 May 2017 09:15:30 +0200 > Jakub Kulesza via samba <samba at lists.samba.org> wrote: > >> [profiles] >> path =

Hello, I have the following problem. I am trying to pxeboot a virtual machine using Sun's Virtualbox. I am trying to experiment with the menu options of pxelinux and this is my pxelinux.cfg/default file. # generated by fai-chboot for host cdbexample with IP 172.16.31.200 default menu.c32 prompt 0 default fai-generated timeout 300 #ONTIMEOUT local MENU TITLE PXE Menu LABEL fai-generated

We lost the attributes on all the bricks on servers glusterfs2 and glusterfs3 again. [root at glusterfs2 Log_Files]# gluster volume info Volume Name: StoragePool Type: Distributed-Disperse Volume ID: 149e976f-4e21-451c-bf0f-f5691208531f Status: Started Number of Bricks: 20 x (2 + 1) = 60 Transport-type: tcp Bricks: Brick1: glusterfs1sds:/ws/disk1/ws_brick Brick2: glusterfs2sds:/ws/disk1/ws_brick

@ pranith , yes . we can get the pid on all removexattr call and also print the backtrace of the glusterfsd process when trigerring removing xattr. I will write the script and reply back. On Sat, Jul 8, 2017 at 7:06 AM, Pranith Kumar Karampuri <pkarampu at redhat.com > wrote: > Ram, > As per the code, self-heal was the only candidate which *can* do > it. Could you check

Ram, As per the code, self-heal was the only candidate which *can* do it. Could you check logs of self-heal daemon and the mount to check if there are any metadata heals on root? +Sanoj Sanoj, Is there any systemtap script we can use to detect which process is removing these xattrs? On Sat, Jul 8, 2017 at 2:58 AM, Ankireddypalle Reddy <areddy at commvault.com> wrote: >

Ram, If you see it again, you can use this. I am going to send out a patch for the code path which can lead to removal of gfid/volume-id tomorrow. On Mon, Jul 10, 2017 at 5:19 PM, Sanoj Unnikrishnan <sunnikri at redhat.com> wrote: > Please use the systemtap script(https://paste.fedoraproject.org/paste/ > EGDa0ErwX0LV3y-gBYpfNA) to check which process is invoking remove xattr

Please use the systemtap script( https://paste.fedoraproject.org/paste/EGDa0ErwX0LV3y-gBYpfNA) to check which process is invoking remove xattr calls. It prints the pid, tid and arguments of all removexattr calls. I have checked for these fops at the protocol/client and posix translators. To run the script .. 1) install systemtap and dependencies. 2) install glusterfs-debuginfo 3) change the path

Ram, I sent https://review.gluster.org/17765 to fix the possibility in bulk removexattr. But I am not sure if this is indeed the reason for this issue. On Mon, Jul 10, 2017 at 6:30 PM, Ankireddypalle Reddy <areddy at commvault.com> wrote: > Thanks for the swift turn around. Will try this out and let you know. > > > > Thanks and Regards, > > Ram > > *From:*

Hi, I've been using Samba 2.0.5 successfully for a long time and am now trying to configure 2.2.3a under Debian GNU/Linux 3.0. I've succeeded with the exception of one printer share. What makes this frustrating is that the share is mostly functional, but I haven't been able to find my problem described anywhere else. We have two HP printers, a LaserJet 4000N and a LaserJet 5N,

Thanks for the swift turn around. Will try this out and let you know. Thanks and Regards, Ram From: Pranith Kumar Karampuri [mailto:pkarampu at redhat.com] Sent: Monday, July 10, 2017 8:31 AM To: Sanoj Unnikrishnan Cc: Ankireddypalle Reddy; Gluster Devel (gluster-devel at gluster.org); gluster-users at gluster.org Subject: Re: [Gluster-devel] gfid and volume-id extended attributes lost Ram,

Hi Team, Please let me know how I can know which bricks are part of which sub-volumes in case of disperse volume, for example in below volume has two sub-volumes : Type: Distributed-Disperse Volume ID: 6dc8ced8-27aa-4481-bfe8-057133c31d0b Status: Started Snapshot Count: 0 Number of Bricks: 2 x (4 + 2) = 12 Transport-type: tcp Bricks: Brick1: pdchyperscale1sds:/ws/disk1/ws_brick Brick2:

Hello $LIST, i setup a new clean domain to examine the feature of updating/creating PTR records. When i call ipconfig /registerdns on the client i get this entry in the windows eventlog (sorry german) Fehler beim Registrieren der Hostressourceneinträge (A oder AAAA) für den Netzwerkadapter mit den folgenden Einstellungen: Adaptername: {2A467E48-624B-4CCF-9B7D-9BA5629D8117}

On Mon, 20 Nov 2023 15:34:19 +0100 Dirk Laurenz via samba <samba at lists.samba.org> wrote: > Full output: > > root at iob-master:~# samba-tool domain backup online --server=dc01 > --targetdir=/autofs/backup/linux/samba_dom/$(hostname -d) -U > administrator Password for [SAMBA\administrator]: > INFO 2023-11-20 15:30:05,639 pid:73781 >

Hi. We've been using PXELINUX for years, to kick off OS installations (floppy images) and booting assorted tools. The addition of ISO support in memdisk opened up some new alternatives that we also use, e.g. booting WinPE ISO images over PXE. Today I downloaded a BIOS for a HP EliteBook 8440p and discovered that the BIOS file is 3 MB. I could probably squeeze it onto a 2.88 MB floppy image