similar to: CUPS via SMB with per-user credentials?

> I have a multi-user Linux box in a mostly Windows NT/2000 shop. The office > printer is available only via SMB (hosted by a Win2000 box) and access is > restricted to valid users in the local NT domain. There is no "global" or > "print" user/password. I saw this post from 2003... any action since then? I'm in a similar boat, but a little bit worse: in my

I created an account at IAXTEL.com to route 1-700-XXX-XXXX calls through. IAXTEL.com gave me a number (example) of 700-555-6226. I have made the following changes to my: /etc/asterisk/extensions.conf: [iaxtel700] exten => _81700XXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1}) exten => _81800NXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1})

Hello, I'm trying to receive a fax to my inbound number from voipbuster. Asterisk receives the call and starts the rxfax application successful, but then nothing happens. The calling party is still hearing a ringing tone, or sometimes nothing. Voicecalls are working correct and without problems. For testing I've add a local number (300) to the dialplan. When I call this number

Hi Guys, I have Spikko setup as provider of DID and outbound routes and I can make calls out but no inbound calls via DID can be made. I did a sip debug which is reported below. I never receive the call though, I have a catch all in my inbound routes and it doesn't hit my context at all or not sip invite comes in: FreePBX: Trunk Name: *Spikko* Peer Detail *username=MyUsername*

I am attempting to setup a Samba printserver to replace our Windows Print servers. I have defined a few printers in CUPS, some raw, and some not. When I use the GUi to upload the drivers, The dialog works, however after that is accomplished, any attempt to get the printer properties or to use the printer from my W2K system (cpq0277) causes explorer to ABEND. System setup: RedHat 9 CUPS

Hi thanks to everybody who has been assisting me in solving the various problems I had to dial out from Asterisk to a PSTN number with SIP using Nikotel's VoIP service. I have drafted a mini-how-to which is available at http://www.akabeni.com/benjk/Using_Asterisk_with_Nikotel.pdf This is a first draft, I will amend this further, in particular the "verify and debug" section

Hi, I've got a windows printer that is no more working. If I try to see the status of the printer I get: server:~ # lpc status la02 la02: printer is on device 'smb' speed -1 queuing is enabled printing is disabled no entries daemon present that means printing is no enabled. If I try to enable the printer I cannot get the printer enabled:

Am running Samba 3.0.20 on SuSE 10.0 and cups as my printer provider. I've used the cups gui to create a number of printers. They appeared correctly in my Printers and Faxes folder in Explorer and I uploaded my print drivers successfully. Now, a few days later, I'm looking at my printers and I notice that the comments that show up on the print shares themselves still reflect some old data

Hi, I'm trying to use Cups + Samba to make a print server for many purpouses. The main one is to account how many pages where printed by whom and centralize all printers in one server. If I configure samba and cups in the RAW mode using windows original drivers of the printers, everything works fine, but this way I can't use cups accounting. So I reinstaled all my printers

Hi Samba Bods, Sorry for re-posting this one but I got no response to my last post except for a level 10 logs request which I uploaded last week. I have been looking at numerous howtos and newsgroup postings and I cannot spot what the issue is. I am sure its a simple config issue, but I am lost .. I am using Samba 3.2.4 compiled from source on AIX 5.3 TL8 and using "security =

Hello, I administer a small office. As is common, we have samba acting as Domain controller and I have a 'logon script' configured in smb.conf. The logon script does not do much: map the P: (public) and H: (home) drives, as well as setting the time. This is done through net commands, and is all very familiar to readers of this list. The new laptop arrived from Dell, and it's XP Home.

I am running Gentoo. I am trying to get my /etc/fstab to automatically mount a remote Samba share at boot time. I have the following in my /etc/fstab file: //192.168.0.2/share /mnt/share cifs auto,credentials=/home/user/.smbpasswd,uid=1000,umask=002,user 0 0 This works fine if I specify the username and password in the /etc/fstab file. However, if I try to use the credentials file

Greetings, I've set up the AMI and am able to authenticate, however I am unable to execute "Action: Status". I get a permission denied error: asterisk:/etc/asterisk# telnet localhost 5038 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Asterisk Call Manager/1.0 Action: Login Username: myusername Secret:

Hello R-helpers, I'm new to XML. I have been using an application for some time, but now I wish to automate my downloads with R. When I use the web interface of their XML application, I'm able to read the response in R with the XML package. My problem now is to send the requests directly from R. Here below are two XML request scripts that come from the applicaton help file. My

Hi All, I am using Samba 3.2.4 compiled from source on AIX 5.3 TL8 and using "security = SERVER" in the smb.conf works fine, however I am having some issues when using "security = ADS" .. I have followed numerous HOWTOs and newsgroup listings and seem to be going round in circles .. I think I can authenticate ok against the domain win2k3 server, but then Samba bombs out with

I suspect a bug in either smbclient 4.0.9 or CUPS 1.6.3 (which wouldn't be Samba's problem, of course) where a linux client does not send the server's Called Name in the NetBIOS session request sent to a server using smb. Now, the problem is that my university's print system selects the print configuration file to use based on matching the Called Name. No Called Name leads to no

I have a problem getting Windows 98 clients printing to CUPS printers where I have the printer access allowed/denied by username. It appears that samba is passing the username in uppercase to CUPS as the owner of the printjob and then CUPS does not recognise that username and rejects the job. It all works under Windows NT/XP. I am running samba 3.0.20 and cups 1.1.23. The smb.conf file is below

Dear all, First off, I am very new to asterisk so forgive me if any of my comments or questions seem trivial. Thanks to [this post](http://blog.polybeacon.com/2010/10/17/asterisk-1-8-and-google-voice/) and [this post](http://www.davidvossel.com/?p=28), I have GV set up on asterisk through jabber.conf and gtalk.conf. I can successfully dial out from asterisk. I'm trying to set up an

I've been running FreeRadius 2 on Centos 5.5 for a while now. So far so good. I'm now looking to make connecting to our WPA secured wireless easier. The RADIUS server is running in a VM and since the system is in use I have copied the original and used that copy to create a test environment. I have run through all system updates and have upgraded all relevant packages. The test system

Hi all, I wrote a small script (developed and testet on Solaris 8), which automates the generation and installation of the steps needed to put keys in place. I you are interested to take it, feel free to do it. -- *** Freundliche Gruesse **** Best regards *** Anton Burkhalter Dipl. El. Ing. HTL Mobile:+41(0)78 844-0290 mailto:anton.burkhalter at gmx.net