Displaying 20 results from an estimated 10000 matches similar to: "How to get Samba to listen on private network without a physical interface"
2018 Mar 26
3
centos7: pptpd vpn problem: mppe_decompress[0]: FLUSHED bit not set in stateless mode!
I try to setup a PPTP VPN server on Centos 7 and from client a router
Vodafone Station (Firmware 5.4.8.1.316.1.21)
On c7 I have install this:
[root at s-virt tmp]# rpm -q pptpd ppppptpd-1.4.0-2.el7.x86_64ppp-2.4.5-
33.el7.x86_64
and setup all file and firewall like howto say.This now is my config:
/etc/pptpd.conf:option
/etc/ppp/options.pptpd/etc/pptpd.conf:logwtmp/etc/pptpd.conf:localip
2008 Mar 17
1
VPN server and logon to Samba PDC
My goal is to make VPN access to our Samba PDC (FreeBSD 7.0) so that users
can access there home shares from Windows clients.
I have read the instructions at
http://samba.org/ftp/unpacked/lorikeet/pppd/final-report.pdf, but I can't
make it work. Don't know if is due to my lack of skills or has something to
do with the Popop functionality in FreeBSD.
Following the instructions, i made a
2005 Nov 17
1
why does rsync list files for one directory but not another
Hi, I'm running rsync 2.5.7 on RHEL3 locally and 2.5.4 on RH7.3
remotely. Below is a transcript of a session where rsync lists the
files that it will transfer for /usr/lib/courier-imap/etc but not for
/home/jeff. Would someone tell me what I need to do to get it to work?
[root@anuurn root]# cat rsync.taurox.excludes
+ /etc
+ /etc/httpd**
+ /etc/postfix**
+ /etc/ppp**
+ /etc/pptpd.conf
+
2008 Jul 29
1
samba 3.2 breaks ppp winbind plugin
We have a system running fedora 8 using pptpd from the poptop yum
repository.
See http://www.poptop.org/
pptpd/pppd use the winbind plugin from the ppp package to authenticate
to Active Directory.
This works just fine.
Then I found the same setup would not work on a fedora 9 setup.
In order to exclude any possible configuration errors I built
a virtual machine and simulated an upgrade. This
2005 Jul 22
1
Authenticate pptpd server on a domain controller
Hello.
I have two servers:
-One is a vpn server with pptpd. It has debian sarge 3.1, kernel(2.6.8), pptd(1.2.1-4), ppp(2.4.3-2) and Samba(3.0.14a-3). All the accounts to log on the vpn are on /etc/ppp/chap-secrets file.
-The other is a pdc with samba(2.2.7) in red hat 8
I want the accounts in the first server (chap-secrets file) authenticate against the pdc server (/etc/samba/smbpasswd) on
2010 Jun 02
1
Regression of 5616?
I'm wondering if I'm seeing a regression of 5616 with 3.4.8. I'm trying to
set-up pptpd with winbind, which I'm doing on two machines on Debian lenny,
and I'm trying on Debian Squeeze now. The Windows client is saying "Error
778: It was not possible to verify the identity of the server." The logs say
that everything is ok, and that the client is hanging up the
2005 Oct 31
4
VPN via PPTP and MPPE
I have set up a VPN over PPTP on a CentOS server using the
DKMS module rpm dkms-0-2.0.6-3.el4 from
http://centos.karan.org/el4/extras/stable/i386/RPMS/repodata/repovie
w/dkms-0-2.0.6-3.el4.kb.html
and
kernel_ppp_mppe-0.0.5-2dkms.noarch.rpm at
http://pptpclient.sourceforge.net/howto-fedora-
core-3.phtml.
I have configured the pptpd server on Centos4 to use MS_CHAPv2,
128bit encryption and
2008 Feb 20
2
Shorewall vpn and Messenger
I have installed the shorewall frontend with pptpd tunnelling server.
All works fine except only one thing:
When the outside users connect to my centos server to shorewall over
pptpd vpn tunneling then the client computer can''t login to live
messenger, but the customer can connect perfectly with skype, use mail,
internet etc... all of this program installed in their outside
computers.
2010 Nov 03
4
Pptp vpn server
How to setup a vpn server on centos?
I can't find the pptpd in any repo
2020 Feb 18
1
Routing between networks
Problem:
I have four networks, A, B, C, and D
Networks B, C, and D should not be able to see each other.
Network A should be able to see all of them.
A - 172.16.1.1/24
B - 172.16.2.1/24
C - 172.16.3.1/24
D - 172.16.0.1/24
For host machine X, which is at 172.16.1.100/24 (network A), I added a
route for it to ping a machine (Y) on the network B:
ip route add 172.16.2.0/24 via
2003 Jul 09
2
router in a subnet again :)
Hi,
after migrating to shorewall firewall from my own iptables rule set (to
utilise freeswan vpn tunnels) I have successfully configured a 3 interface
firewall with net2net vpn tunnels, with the help of the shorewall
documentation. However I cannot seem to configure my final step which is to
masq another subnet attached to my LAN (LANB, via Cisco 1603 router) to get
internet access via the
2001 Apr 22
5
Slow Copy WinXX - Linux/Samba :-(
I never thought it would happen to me, but it did...
I have read threads about slow copies from WinXX to Linux/Samba on the
list in the past, but I don't recall a concise answer regarding what the
cause was.
THE PROBLEM:
Trying to copy an 8 meg file from Win95 to my Linux/Samba box (named
"Nemesis" - for good reason), the transfer speed slows to a crawl. The
Win95 copy dialog box
2000 Mar 13
1
I can't get multiple interfaces to work
I've looked through all the doc and searched the list archives, but I just
can't seem to get it to work. I have a Linux box with 5 ethernet
interfaces, 3 of which have winboxes I'd like to include in my little Samba
network. I'm able to get it far enough for each winbox to see the linbox,
but they can't see each other.
Here's my setup:
Winboxes Linbox
Win2k -
2006 Nov 12
2
ipsec-tools with cisco vpn client
Hi,
anybody successfully running win32 client with Cisco vpn client against
ipsec-tools? I'm looking for elegantly running VPN road warrior solution.
Scenarios are:
- ipsec-tools with Cisco vpn client
- pptpd with Windows XP native client
- OpenVPN with OpenVPN Windows client
- ???
Any hints? Thanks for reply.
David Hrb??
2015 Oct 28
2
NTLM_AUTH failing?
That is client setup. We have that under control. Our Linux users use
Network Manager to connect and our Windows users use the stuff built
into Windows. My problem is server-side. The server is a PPTP VPN
(running via pptpd) and I have to add the lines below to make it work.
plugin winbind.so
ntlm_auth-helper "/usr/bin/ntlm_auth --helper-protocol=ntlm-server-1"
Now, that allows ALL
2008 Nov 24
1
PPTP VPN server
Hi
I've been using linux to give VPN access to my corporate LAN using the
following software:
Centos 5.2 x86
kernel 2.6.18-92.1.18.el5xen
pptpd (poptop) 1.3.4
ppp 2.4.4
The Centos server has directly connected the Internet Router, on one
interface (eth1) and the LAN on another (eth0) and it works as the
firewall/VPN server of my LAN.
It mostly works, however, if I try to connect using
2010 Sep 07
2
winbind and pptpd authentication failure
Hi all
I'm not sure whether to go to the ppp lists for this, or the samba
lists. I thought I'd try here first.
I have a linux firewall using winbind to authenticate users coming in
with PPTP. It all seemed to work OK at first. After a while I noticed
that authentication was denied to users who had previously (as in less
than a day) authenticated successfully. After a day or so of
2004 Apr 14
1
PPTP Server running behind Shorewall
Hi friends, I need help.
I''ve PPTP Server running behind Shorewall. The PPTP server is working OK in my
LAN, but I want to connect outside and It isn''t working.
I''ve configurate shorewall like http://www.shorewall.net/PPTP.htm.
I add only this lines in my rules
DNAT net loc:165.182.15.15 tcp 1723 - IPext
DNAT net loc:165.182.15.15 47 - - IPext
It isn''t
2003 Oct 31
3
FW: MSCHAPv2 microsoft client/linux/Active Directory
I don't want to use a VPN to solve this one.
I am really wondering with (samba 3.x) when the linux box become part of
The AD domain does it get a special privileges?
>
> Hi,i am not sure if i understand yor needs, but maybe this helps
> this links guide you to setup a pptp server an client for linux
> http://www.poptop.org/
> http://pptpclient.sourceforge.net/
> there
2008 Mar 30
1
WPA enterprise
Hi i have freeradius mschap ldap working configuration - i am using it for
pptpd (VPN server) to authentificate against freeradius with ldap .
Windows VPN client can connect to our company network and use it.
Next i want to add user/password auth to our WIFI (based on Dlink AP - with
radius support). We are currently using wpa-preshared key. i want to use wpa
enterprise with ldap